Pull old snapshot.

(Portage version: 2.0.51.22-r1)

3 files changed, 5 insertions, 1862 deletions

diff --git a/x11-base/xorg-x11/ChangeLog b/x11-base/xorg-x11/ChangeLog
index c2f12f6d3584..9f9389732cc4 100644
--- a/x11-base/xorg-x11/ChangeLog
+++ b/x11-base/xorg-x11/ChangeLog
@@ -1,6 +1,10 @@
 # ChangeLog for x11-base/xorg-x11
 # Copyright 2000-2005 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-x11/ChangeLog,v 1.438 2005/07/21 19:37:57 spyderous Exp $
+# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-x11/ChangeLog,v 1.439 2005/07/21 19:41:16 spyderous Exp $
+
+  21 Jul 2005; Donnie Berkholz <spyderous@gentoo.org>;
+  -xorg-x11-6.8.99.13.ebuild:
+  Pull old snapshot.
 
   21 Jul 2005; Donnie Berkholz <spyderous@gentoo.org>;
   xorg-x11-6.8.99.15.ebuild:
diff --git a/x11-base/xorg-x11/files/digest-xorg-x11-6.8.99.13 b/x11-base/xorg-x11/files/digest-xorg-x11-6.8.99.13
deleted file mode 100644
index 995e42acac68..000000000000
--- a/x11-base/xorg-x11/files/digest-xorg-x11-6.8.99.13
+++ /dev/null
@@ -1,7 +0,0 @@
-MD5 4d7d5fdc4ed56c144ef998302581478c eurofonts-X11.tar.bz2 8811
-MD5 01a21c248e5ac4ba02cbbea994fc774a xfsft-encodings-0.1.tar.bz2 11892
-MD5 d0fab996daf97adf095e2dad0bd9012e gentoo-cursors-tad-0.3.1.tar.bz2 1196991
-MD5 3d4ee581df78c9dacc6e97aa07a1af72 gemini-koi8-u.tar.bz2 439173
-MD5 69204953eae88c6733a5f42881baf49b xorg-x11-6.8.99.13-files-0.2.tar.bz2 9757
-MD5 0dead2c6a3e1afdde88075f0894305d7 xorg-x11-6.8.99.13-patches-0.1.1.tar.bz2 118991
-MD5 14781aa072a633678bc65a7a55e58f74 xorg-x11-6.8.99.13.tar.bz2 45016561
diff --git a/x11-base/xorg-x11/xorg-x11-6.8.99.13.ebuild b/x11-base/xorg-x11/xorg-x11-6.8.99.13.ebuild
deleted file mode 100644
index 5534da008f41..000000000000
--- a/x11-base/xorg-x11/xorg-x11-6.8.99.13.ebuild
+++ /dev/null
@@ -1,1854 +0,0 @@
-# Copyright 1999-2005 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-x11/xorg-x11-6.8.99.13.ebuild,v 1.8 2005/07/18 23:45:26 spyderous Exp $
-
-# Set TDFX_RISKY to "yes" to get 16-bit, 1024x768 or higher on low-memory
-# voodoo3 cards.
-
-# Libraries which are now supplied in shared form that were not in the past
-# include:  libFS.so, libGLw.so, libI810XvMC.so, libXRes.so, libXfontcache.so,
-# libXinerama.so, libXss.so, libXvMC.so, libXxf86rush.so, libfontenc.so,
-# libxkbfile.so, libxkbui.so
-
-# TODO
-# 1 June 2005 <spyderous@gentoo.org>
-#   TARGET: none
-#		Consider building shared libraries only, when both are provided
-#		Combine find loops for "Creating fonts.scale files," "Generating
-#			fonts.dir files and "Generating Xft cache"
-#		<Mr_Bones_> the loop in pkg_postinst for removing Compose can probably
-#			be one line of bash expansion like rm -f ${ROOT}/usr/$(get_libdir)/
-#			X11/locale/{ja*|ko*|zh*}/Compose
-#		Clean up migration function
-#			- loop through lib* instead of repetition
-#		Fix direction of lib -> libdir symlink
-#		Generalize any functions that make sense to generalize (i.e., anything
-#			that might realistically see use elsewhere, or repetitively here)
-inherit eutils flag-o-matic toolchain-funcs x11 linux-info multilib
-
-
-# Make sure Portage does _NOT_ strip symbols.  We will do it later and make sure
-# that only we only strip stuff that are safe to strip ...
-RESTRICT="nostrip"
-
-# IUSE="gatos" disabled because gatos is broken on ~4.4 now (31 Jan 2004)
-IUSE="3dfx 3dnow bitmap-fonts cjk debug dlloader dmx doc font-server
-	insecure-drivers ipv6 minimal mmx nls nocxx opengl pam sdk sse static
-	truetype-fonts type1-fonts uclibc xprint xv"
-# IUSE_INPUT_DEVICES="synaptics wacom"
-
-FILES_VER="0.2"
-PATCH_VER="0.1.1"
-XCUR_VER="0.3.1"
-XFSFT_ENC_VER="0.1"
-
-S=${WORKDIR}/xc
-
-HOMEPAGE="http://xorg.freedesktop.org/"
-
-# Misc patches we may need to fetch ..
-X_PATCHES="http://dev.gentoo.org/~spyderous/${PN}/patchsets/${PV}/${P}-patches-${PATCH_VER}.tar.bz2
-	http://dev.gentoo.org/~cyfred/distfiles/${P}-patches-${PATCH_VER}.tar.bz2
-	mirror://gentoo/${P}-patches-${PATCH_VER}.tar.bz2"
-
-GENTOO_FILES="http://dev.gentoo.org/~spyderous/${PN}/patchsets/${PV}/${P}-files-${FILES_VER}.tar.bz2
-	http://dev.gentoo.org/~cyfred/distfiles/${P}-files-${FILES_VER}.tar.bz2
-	mirror://gentoo/${P}-files-${FILES_VER}.tar.bz2"
-
-SRC_URI="!minimal? ( mirror://gentoo/eurofonts-X11.tar.bz2 )
-	font-server? ( http://dev.gentoo.org/~cyfred/xorg/${PN}/patchsets/${PV}/xfsft-encodings-${XFSFT_ENC_VER}.tar.bz2 )
-	!minimal? ( mirror://gentoo/gentoo-cursors-tad-${XCUR_VER}.tar.bz2 )
-	nls? ( mirror://gentoo/gemini-koi8-u.tar.bz2 )
-	${GENTOO_FILES}
-	${X_PATCHES}
-	http://xorg.freedesktop.org/snapshots/${P}.tar.bz2"
-#	http://xorg.freedesktop.org/X11R${PV}/src-single/X11R${PV}-src.tar.bz2"
-#	http://xorg.freedesktop.org/X11R${PV}/src/X11R${PV}-src1.tar.gz
-#	http://xorg.freedesktop.org/X11R${PV}/src//X11R${PV}-src2.tar.gz
-#	http://xorg.freedesktop.org/X11R${PV}/src//X11R${PV}-src3.tar.gz
-#	http://xorg.freedesktop.org/X11R${PV}/src//X11R${PV}-src4.tar.gz
-#	http://xorg.freedesktop.org/X11R${PV}/src//X11R${PV}-src5.tar.gz
-#	doc? (
-#		http://xorg.freedesktop.org/X11R${PV}/src//X11R${PV}-src6.tar.gz
-#		http://xorg.freedesktop.org/X11R${PV}/src//X11R${PV}-src7.tar.gz
-#	)"
-
-LICENSE="Adobe-X CID DEC DEC-2 IBM-X NVIDIA-X NetBSD SGI UCB-LBL XC-2
-	bigelow-holmes-urw-gmbh-luxi christopher-g-demetriou national-semiconductor
-	nokia tektronix the-open-group todd-c-miller x-truetype xfree86-1.0
-	MIT SGI-B BSD || ( FTL GPL-2 )"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 -mips ~ppc -ppc64 ~sparc ~x86"
-
-DEPEND=">=sys-libs/ncurses-5.1
-	>=sys-libs/zlib-1.1.3-r2
-	>=sys-devel/flex-2.5.4a-r5
-	>=dev-libs/expat-1.95.3
-	>=media-libs/freetype-2.1.8
-	>=media-libs/fontconfig-2.1-r1
-	opengl? ( >=x11-base/opengl-update-2.2.0 )
-	!nocxx? ( >=x11-misc/ttmkfdir-3.0.9-r2 )
-	>=sys-apps/sed-4
-	sys-apps/util-linux
-	dev-lang/perl
-	media-libs/libpng
-	!<=app-emulation/emul-linux-x86-xlibs-1.2-r3
-	!virtual/xft
-	!virtual/x11"
-# x11-libs/xft -- blocked because of interference with xorg's
-
-RDEPEND="
-		>=sys-libs/zlib-1.1.3-r2
-		>=sys-devel/flex-2.5.4a-r5
-		>=dev-libs/expat-1.95.3
-		>=media-libs/freetype-2.1.8
-		>=media-libs/fontconfig-2.1-r1
-		opengl? ( >=x11-base/opengl-update-2.2.0 )
-		!nocxx? ( >=x11-misc/ttmkfdir-3.0.9-r2 )
-		media-libs/libpng
-		>=sys-libs/ncurses-5.1
-		!<=app-emulation/emul-linux-x86-xlibs-1.2-r3
-		!virtual/xft
-		!virtual/x11"
-
-PDEPEND="x86? (
-			3dfx? ( >=media-libs/glide-v3-3.10 )
-			input_devices_synaptics? ( x11-misc/synaptics )
-			input_devices_wacom? ( x11-misc/linuxwacom )
-		)
-		alpha? (
-			3dfx? ( >=media-libs/glide-v3-3.10 )
-		)
-		!uclibc? ( x11-terms/xterm )"
-
-PROVIDE="virtual/x11
-	opengl? virtual/opengl
-	opengl? virtual/glu
-	virtual/xft"
-
-DESCRIPTION="An X11 implementation maintained by the X.Org Foundation"
-
-pkg_setup() {
-	FILES_DIR="${WORKDIR}/files"
-	PATCHDIR="${WORKDIR}/patch"
-	EXCLUDED="${PATCHDIR}/excluded"
-
-	# Set up CFLAG-related things
-	cflag_setup
-
-	# See bug #35468, circular pam-X11 dep
-	check_pam
-
-	# Look for invalid/dangerous USE flags and combinations
-	check_use_combos
-
-	setup_multilib
-
-	# xfs user
-	if use font-server; then
-		enewgroup xfs 33
-		enewuser xfs 33 /bin/false /etc/X11/fs xfs
-	fi
-}
-
-src_unpack() {
-	unpack_all
-
-	patch_setup
-
-	do_patch
-
-	host_def_setup
-
-	use_specific_hacks
-}
-
-src_compile() {
-	build
-}
-
-src_install() {
-	install_everything
-
-	backward_compat_install
-
-	fix_permissions
-
-	# We zap our CFLAGS in the host.def file, as hardcoded CFLAGS can
-	# mess up other things that use xmkmf
-	zap_host_def_cflags
-
-	# EURO support
-	if ! use minimal; then
-		add_euro_support
-	fi
-
-	setup_standard_symlinks
-
-	if use opengl; then
-		fix_opengl_symlinks
-	fi
-
-	libtool_archive_install
-
-	compose_files_install
-
-	if use font-server; then
-		encode_xfsft_files
-	fi
-
-	if use nls; then
-		koi8_fonts_install
-	fi
-
-	etc_files_install
-
-	if use opengl; then
-		dynamic_libgl_install
-	fi
-
-	fix_libtool_libdir_paths "$(find ${D} -name *.la)"
-
-	cursor_install
-
-	strip_execs
-
-	if use minimal; then
-		minimal_install
-	fi
-
-	# TEMPORARY hack: should be patched in, if it's not already
-	# For Battoussai's gatos stuffs:
-	if use sdk; then
-		insinto /usr/$(get_libdir)/Server/include
-		doins ${S}/extras/drm/shared/drm.h
-	fi
-
-	xprint_install
-
-	config_files_install
-}
-
-pkg_preinst() {
-	# Do migration before anything else, so we do all the rest inside the
-	# symlink
-
-	# Get rid of "standard" symlinks
-	# We can't overwrite symlink with directory w/ $(mv -f)
-	[ -L ${ROOT}usr/$(get_libdir)/X11 ] \
-		&& rm ${ROOT}usr/$(get_libdir)/X11
-	[ -L ${ROOT}usr/include/X11 ] \
-		&& rm ${ROOT}usr/include/X11
-	[ -L ${ROOT}usr/include/GL ] \
-		&& rm ${ROOT}usr/include/GL
-	[ -L ${ROOT}usr/bin/X11 ] \
-		&& rm ${ROOT}usr/bin/X11
-	# Get rid of some apparent artifacts of migration
-	[ -L ${ROOT}usr/include/GL/GL ] \
-		&& rm ${ROOT}usr/include/GL/GL
-	[ -L ${ROOT}usr/include/X11/X11 ] \
-		&& rm ${ROOT}usr/include/X11/X11
-	[ -d ${ROOT}usr/share/fonts/fonts ] \
-		&& rm -rf ${ROOT}usr/share/fonts/fonts
-
-	# No need to do this, if it's already been done
-	# Also, it'll overwrite a ton of stuff because it won't realize /usr/X11R6
-	# is a symlink.
-	if [ ! -L "/usr/X11R6" ]; then
-		# Migrate stuff in /usr/X11R6 to /usr
-		local DIR DIRS
-		DIRS="bin include lib"
-		if [ "lib" != "$(get_libdir)" ]; then
-			DIRS="${DIRS} $(get_libdir)"
-		fi
-		for DIR in ${DIRS}; do
-			migrate /usr/X11R6/${DIR} /usr/${DIR}
-		done
-		# Can't do this in the other loop because of different start and end
-		migrate /usr/X11R6/man /usr/share/man
-	fi
-
-	update_config_files
-
-	cleanup_fonts
-
-	# See above comment for the same test
-	if [ ! -L "/usr/X11R6" ]; then
-		# Needs to happen after cleanup_fonts()
-		migrate /usr/X11R6/$(get_libdir)/X11/fonts /usr/share/fonts
-
-		# Get rid of symlinks so we can migrate /usr/X11R6 without dying when a
-		# symlink tries to copy to a dir
-		einfo "Preparing for /usr/X11R6 -> /usr migration..."
-		local LINK LINKS
-		LINKS="bin include lib man share/info"
-		if [ "lib" != "$(get_libdir)" ]; then
-			LINKS="${LINKS} $(get_libdir)"
-		fi
-		for LINK in ${LINKS}; do
-			if [ -L "${ROOT}/usr/X11R6/${LINK}" ]; then
-				rm -fv ${ROOT}/usr/X11R6/${LINK}
-			fi
-		done
-		einfo "Remaining symlinks in /usr/X11R6:"
-		find ${ROOT}/usr/X11R6/ -type l
-
-		# Woohoo, nothing in /usr/X11R6 after this
-		migrate /usr/X11R6 /usr
-	fi
-
-	move_app_defaults_to_etc
-
-	move_xkb_to_usr
-
-	# Run this even for USE=-opengl, to clean out old stuff from possible
-	# USE=opengl build
-	dynamic_libgl_preinst
-}
-
-pkg_postinst() {
-	env-update
-
-	if [ "${ROOT}" = "/" ]; then
-		font_setup
-
-		if use opengl; then
-			switch_opengl_implem
-		fi
-	fi
-
-	remove_old_compose_files
-
-	setup_tmp_files
-
-	print_info
-}
-
-pkg_postrm() {
-	fix_links
-}
-
-###############
-# pkg_setup() #
-###############
-
-cflag_setup() {
-	# Set up CFLAGS
-	filter-flags "-funroll-loops"
-
-	ALLOWED_FLAGS="-fstack-protector -march -mcpu -mtune -O -O0 -O1 -O2 -O3 -Os"
-	ALLOWED_FLAGS="${ALLOWED_FLAGS} -pipe -fomit-frame-pointer"
-	ALLOWED_FLAGS="${ALLOWED_FLAGS} -momit-leaf-frame-pointer"
-	ALLOWED_FLAGS="${ALLOWED_FLAGS} -g -g0 -g1 -g2 -g3"
-	ALLOWED_FLAGS="${ALLOWED_FLAGS} -ggdb -ggdb0 -ggdb1 -ggdb2 -ggdb3"
-	# arch-specific section added by popular demand
-	case "${ARCH}" in
-		mips)	ALLOWED_FLAGS="${ALLOWED_FLAGS} -mips1 -mips2 -mips3 -mips4 -mabi"
-			;;
-		# -fomit-frame-pointer known to break things and is pointless
-		# according to ciaranm
-		# And hardened compiler must be softened. -- fmccor, 20.viii.04
-		sparc)	filter-flags "-fomit-frame-pointer" "-momit-leaf-frame-pointer"
-			if has_hardened && ! use dlloader; then
-				einfo "Softening gcc for sparc."
-				ALLOWED_FLAGS="${ALLOWED_FLAGS} -fno-pie -fno-PIE"
-				append-flags -fno-pie -fno-PIE
-			fi
-
-			if [[ ${ABI} == "sparc64" ]]; then
-				ALLOWED_FLAGS="${ALLOWED_FLAGS} -D__sparc_v9__ -D__linux_sparc_64__"
-				append-flags -D__sparc_v9__ -D__linux_sparc_64__
-			fi
-			;;
-		# gcc-3.3.2 causes invalid insn error
-		hppa ) replace-cpu-flags 2.0 1.0
-			;;
-	esac
-
-	# Recently there has been a lot of stability problem in Gentoo-land.  Many
-	# things can be the cause to this, but I believe that it is due to gcc3
-	# still having issues with optimizations, or with it not filtering bad
-	# combinations (protecting the user maybe from themselves) yet.
-	#
-	# This can clearly be seen in large builds like glibc, where too aggressive
-	# CFLAGS cause the tests to fail miserbly.
-	#
-	# Quote from Nick Jones <carpaski@gentoo.org>, who in my opinion
-	# knows what he is talking about:
-	#
-	#   People really shouldn't force code-specific options on... It's a
-	#   bad idea. The -march options aren't just to look pretty. They enable
-	#   options that are sensible (and include sse,mmx,3dnow when appropriate).
-	#
-	# The next command strips CFLAGS and CXXFLAGS from nearly all flags.  If
-	# you do not like it, comment it, but do not bugreport if you run into
-	# problems.
-	#
-	# <azarah@gentoo.org> (13 Oct 2002)
-	strip-flags
-}
-
-check_pam() {
-	if use pam && best_version x11-base/${PN}; then
-		einfo "Previous ${PN} installation detected."
-		einfo "Enabling PAM features in ${PN}."
-	else
-		einfo "Previous ${PN} installation NOT detected."
-		einfo "Disabling PAM features in ${PN}."
-		einfo "You must remerge ${PN} to enable pam."
-		einfo "See http://bugs.gentoo.org/show_bug.cgi?id=35468."
-	fi
-}
-
-check_use_combos() {
-	if use static; then
-		# A static build disallows building the SDK.
-		# See config/xf86.rules.
-		if use sdk; then
-			die "The static USE flag is incompatible with the sdk USE flag."
-		fi
-	fi
-
-	# (#90672)
-	if use sdk && ! use dlloader; then
-		MSG="The sdk and -dlloader USE flags are temporarily incompatible and result in a dead build."
-		einfo ${MSG}
-		einfo "See http://bugs.gentoo.org/show_bug.cgi?id=90672."
-		die ${MSG}
-	fi
-
-	# (#77949)
-	if use minimal && use doc; then
-		die "The minimal and doc USE flags are incompatible and result in a dead build."
-	fi
-
-	if use xv && ! use opengl; then
-		eerror "See http://bugs.gentoo.org/show_bug.cgi?id=67996"
-		eerror "The xv USE flag currently requires the opengl flag."
-		die "This is a known bug. Do not report it."
-	fi
-
-	if use opengl && ! use xv; then
-		eerror "See http://bugs.gentoo.org/show_bug.cgi?id=76936"
-		eerror "The opengl USE flag currently requires the xv flag."
-		die "This is a known bug. Do not report it."
-	fi
-
-	# Echo a message to the user about bitmap-fonts
-	if ! use bitmap-fonts; then
-		ewarn "Please emerge this with USE=\"bitmap-fonts\" to enable"
-		ewarn "75dpi and 100dpi fonts.  Your GTK+-1.2 fonts may look"
-		ewarn "screwy otherwise"
-
-		ebeep 5
-		epause 10
-	fi
-}
-
-setup_multilib() {
-	# on amd64 we need /usr/lib64/X11/locale/lib to be a symlink
-	# created by the emul lib ebuild in order for adobe acrobat, staroffice,
-	# and a few other apps to work.
-	if ! has_multilib_profile; then
-		use amd64 && get_libdir_override lib64
-	fi
-}
-
-################
-# src_unpack() #
-################
-
-unpack_all() {
-	# Unpack source and patches
-	ebegin "Unpacking ${PV} source"
-		unpack ${P}.tar.bz2 > /dev/null
-#		unpack X11R${PV}-src.tar.bz2 > /dev/null
-#		unpack X11R${PV}-src{1,2,3,4,5}.tar.gz > /dev/null
-	eend 0
-
-#	if use doc; then
-#		ebegin "Unpacking documentation"
-#			unpack X11R${PV}-src{6,7}.tar.gz > /dev/null
-#		eend 0
-#	fi
-
-	ebegin "Unpacking Gentoo files and patches"
-		unpack ${P}-files-${FILES_VER}.tar.bz2 > /dev/null
-		unpack ${P}-patches-${PATCH_VER}.tar.bz2 > /dev/null
-	eend 0
-
-	if ! use minimal; then
-		# Unpack TaD's gentoo cursors
-		ebegin "Unpacking Gentoo cursors"
-			unpack gentoo-cursors-tad-${XCUR_VER}.tar.bz2 > /dev/null
-		eend 0
-	fi
-
-	# Unpack extra fonts stuff from Mandrake
-	ebegin "Unpacking fonts"
-		if use nls; then
-			unpack gemini-koi8-u.tar.bz2 > /dev/null
-		fi
-		unpack eurofonts-X11.tar.bz2 > /dev/null
-		if use font-server; then
-			unpack xfsft-encodings-${XFSFT_ENC_VER}.tar.bz2 > /dev/null
-		fi
-	eend 0
-
-	# Remove bum encoding
-	rm -f ${WORKDIR}/usr/share/fonts/encodings/urdunaqsh-0.enc
-}
-
-do_patch() {
-	# Bulk patching - based on patch name
-	# Will create excluded stuff once it's needed
-	cd ${WORKDIR}
-	EPATCH_SUFFIX="patch" \
-	epatch ${PATCHDIR}
-	cd ${S}
-}
-
-host_def_setup() {
-	HOSTCONF="config/cf/host.def"
-
-	ebegin "Setting up ${HOSTCONF}"
-		cd ${S}; cp ${FILES_DIR}/site.def ${HOSTCONF} \
-			|| die "host.def copy failed"
-		echo "#define XVendorString \"Gentoo (The X.Org Foundation ${PV}, revision ${PR}-${PATCH_VER})\"" \
-			>> ${HOSTCONF}
-
-		# Pending http://bugs.gentoo.org/show_bug.cgi?id=49038 and
-		# http://freedesktop.org/cgi-bin/bugzilla/show_bug.cgi?id=600
-		#
-		# Makes ld bail at link time on undefined symbols
-		# Suggested by Mike Harris <mharris@redhat.com>
-		#echo "#define SharedLibraryLoadFlags  -shared -Wl,-z,defs" \
-		#	>> ${HOSTCONF}
-
-		# Enable i810 on x86_64 (RH #126687)
-		if use amd64; then
-			echo "#define XF86ExtraCardDrivers i810" >> ${HOSTCONF}
-		fi
-
-		# FHS install locations
-		echo "#define ManDirectoryRoot /usr/share/man" >> ${HOSTCONF}
-		echo "#define DocDir /usr/share/doc/${PF}" >> ${HOSTCONF}
-		echo "#define FontDir /usr/share/fonts" >> ${HOSTCONF}
-		# Single quotes so FONTDIR doesn't get run
-		echo '#define FontEncDir $(FONTDIR)/encodings' >> ${HOSTCONF}
-		echo "#define BinDir /usr/bin" >> ${HOSTCONF}
-		echo "#define IncRoot /usr/include" >> ${HOSTCONF}
-		# This breaks the case when $(SYSTEMUSRINCDIR) = $(INCDIR)
-		# See xc/include/Imakefile
-		echo "#define LinkGLToUsrInclude NO" >> ${HOSTCONF}
-		# /usr/X11R6/lib/X11
-		echo "#define LibDir /usr/$(get_libdir)/X11" >> ${HOSTCONF}
-		# /usr/X11R6/lib with exception of /usr/X11R6/lib/X11
-		echo "#define UsrLibDir /usr/$(get_libdir)" >> ${HOSTCONF}
-
-		# Make man4 and man7 stuff get 'x' suffix like everything else
-		# Necessary so we can install to /usr/share/man without overwriting
-		echo "#define DriverManDir \$(MANSOURCEPATH)4" >> ${HOSTCONF}
-		echo "#define DriverManSuffix 4x /* use just one tab or cpp will die */" \
-			>> ${HOSTCONF}
-		echo "#define MiscManDir \$(MANSOURCEPATH)7" >> ${HOSTCONF}
-		echo "#define MiscManSuffix 7x /* use just one tab or cpp will die */" \
-			>> ${HOSTCONF}
-
-		# Don't build xterm -- use external (#54051)
-		echo "#define BuildXterm NO" >> ${HOSTCONF}
-
-		# Xwrapper has been removed so we now need to use the set uid server
-		# again, this mustve happened somewhere after 4.3.0 in the development.
-		echo "#define InstallXserverSetUID YES" >> ${HOSTCONF}
-		echo "#define BuildServersOnly NO" >> ${HOSTCONF}
-
-		# Don't use /lib64 if $(get_libdir) != lib64
-		# Replaces 0181_all_4.3.0-amd64-nolib64.patch
-		if [ "$(get_libdir)" == "lib64" ]; then
-			echo "#define HaveLib64 YES" >> ${HOSTCONF}
-			sed -i '/^#define Freetype2LibDir/s:^.*$:#define Freetype2LibDir /usr/lib64:' ${HOSTCONF}
-		else
-			echo "#define HaveLib64 NO" >> ${HOSTCONF}
-		fi
-
-		# Set location of DRM source to be installed
-		echo "#define InstSrcDir ${ROOT}/usr/src/${PF}" >> ${HOSTCONF}
-
-		if [ "$(gcc-major-version)" -eq "3" ]; then
-			if use x86; then
-				# Should fix bug #4189.  gcc 3.x have problems with
-				# -march=pentium4 and -march=athlon-tbird
-				# Seems fixed on 3.3 and higher
-				if [ "$(gcc-minor-version)" -le "2" ]; then
-					replace-cpu-flags pentium4 pentium3
-					replace-cpu-flags athlon athlon-tbird
-				fi
-
-				if [ "$(gcc-minor-version)" -eq "4" ]; then
-					if [ "$(gcc-micro-version)" -lt "4" ]; then
-						#to fix #57602 for now, thanks Spanky (broken sse2)
-						if test_flag -mno-sse2; then
-							append-flags -mno-sse2
-						fi
-						# (#75067) broken sse3
-						if test_flag -mno-sse3; then
-							append-flags -mno-sse3
-						fi
-					fi
-				fi
-
-				# Try a fix for #49310, see #50931 for more info. <spyderous>
-				if [ "$(is-flag -fomit-frame-pointer)" ]; then
-					replace-cpu-flags k6 k6-2 k6-3 i586
-				fi
-			fi
-
-			# Without this, modules breaks with gcc3
-			if [ "$(gcc-minor-version)" -eq "1" ]; then
-				append-flags "-fno-merge-constants"
-				append-flags "-fno-merge-constants"
-			fi
-
-			if [ "$(gcc-minor-version)" -eq "2" ]; then
-				if [ "$(gcc-micro-version)" -lt "2" ]; then
-					# Bug #12775 .. fails with -Os.
-					replace-flags "-Os" "-O2"
-				fi
-			elif [ "$(gcc-minor-version)" -lt "2" ]; then
-				# Bug #12775 .. fails with -Os.
-				replace-flags "-Os" "-O2"
-			fi
-		elif [ "$(gcc-major-version)" -lt "3" ]; then
-			# Bug #12775 .. fails with -Os.
-			replace-flags "-Os" "-O2"
-		fi
-
-		echo "#define CcCmd $(tc-getCC)" >> ${HOSTCONF}
-		echo "#define OptimizedCDebugFlags ${CFLAGS} GccAliasingArgs" >> ${HOSTCONF}
-		echo "#define OptimizedCplusplusDebugFlags ${CXXFLAGS} GccAliasingArgs" >> ${HOSTCONF}
-
-		if use static; then
-			echo "#define DoLoadableServer	NO" >>${HOSTCONF}
-		else
-			einfo "Setting DoLoadableServer to YES."
-			echo "#define DoLoadableServer  YES" >> ${HOSTCONF}
-
-			if use dlloader; then
-				einfo "Setting MakeDllModules to YES."
-				echo "#define MakeDllModules    YES" >> ${HOSTCONF}
-				if has_hardened; then
-					echo "#define HardenedGccSpecs YES" >> ${HOSTCONF}
-				fi
-			else
-				einfo "Setting MakeDllModules to NO."
-				echo "#define MakeDllModules    NO" >> ${HOSTCONF}
-			fi
-		fi
-
-		use_build debug XFree86Devel
-		use_build debug BuildDebug
-		use_build debug DebuggableLibraries
-
-		if ! use debug; then
-			# use less ram .. got this from Spider's makeedit.eclass :)
-			echo "#define GccWarningOptions -Wno-return-type -w" \
-				>> ${HOSTCONF}
-		fi
-
-		# Remove circular dep between pam and X11, bug #35468
-		# If pam is in USE and we have X11, then we can enable PAM
-#		if use pam && [ "$(best_version x11-base/xorg-x11)" ]
-		if [ "$(best_version x11-base/xorg-x11)" ]; then
-			# If you want to have optional pam support, do it properly ...
-			use_build pam HasPam
-			use_build pam HasPamMisc
-		fi
-
-		if use x86 || use alpha; then
-			# build with glide3 support? (build the tdfx_dri.o module)
-			if use 3dfx; then
-				echo "#define HasGlide3 YES" >> ${HOSTCONF}
-			fi
-# 			This won't work unless we can disable building the tdfx stuff
-# 			entirely :/
-#			use_build 3dfx HasGlide3
-		fi
-
-		if use x86; then
-			# optimize Mesa for architecture
-			use_build mmx HasMMXSupport
-			use_build 3dnow Has3DNowSupport
-			use_build sse HasSSESupport
-		fi
-
-		# optimize Mesa for architecture
-		if use amd64; then
-			use_build amd64 HasMMXSupport
-			use_build amd64 Has3DNowSupport
-			use_build amd64 HasSSESupport
-		fi
-
-		# Do we want the glx extension? This will turn off XF86DRI if it's off.
-		# DRI can't build if glx isn't built, so keep this below DRI define.
-		# Do this before hppa so they can turn DRI off
-		use_build opengl BuildGlxExt
-		use_build opengl BuildGLXLibrary
-		use_build opengl BuildXF86DRI
-		# Needs GL headers
-		use_build opengl BuildGLULibrary
-
-
-
-		if use mips; then
-			echo "#define XF86CardDrivers fbdev newport" >> ${HOSTCONF}
-		fi
-
-		# Make xv optional for more minimal builds
-		use_build xv BuildXvLibrary
-		use_build xv BuildXvExt
-		# Depends on X11/extensions/Xv.h
-		use_build xv BuildXF86RushExt
-		use_build xv BuildXF86RushLibrary
-
-		if use hppa; then
-			echo "#define DoLoadableServer NO" >> ${HOSTCONF}
-			echo "#define BuildXF86DRI NO" >> config/cf/host.def
-			echo "#undef DriDrivers" >> config/cf/host.def
-			echo "#define XF86CardDrivers fbdev" >> config/cf/host.def
-			echo "#define BuildXvExt YES" >> config/cf/host.def
-		fi
-
-
-		if use alpha; then
-			echo "#define XF86CardDrivers mga nv tga s3virge sis rendition \
-				i740 tdfx cirrus tseng fbdev \
-				ati vga v4l glint s3 vesa" >> ${HOSTCONF}
-		fi
-
-		if use ppc; then
-			echo "#define XF86CardDrivers mga glint s3virge sis savage trident \
-				chips tdfx fbdev ati DevelDrivers vga nv imstt \
-				XF86OSCardDrivers XF86ExtraCardDrivers" >> ${HOSTCONF}
-		fi
-
-		if use ppc64; then
-			echo "#define MakeDllModules YES" >> ${HOSTCONF}
-			echo "#define XF86VgaHw YES" >> ${HOSTCONF}
-			echo "#define XF86FBDevHw YES" >> ${HOSTCONF}
-			echo "#define XF86CardDrivers mga fbdev v4l ati vga nv" >> ${HOSTCONF}
-		fi
-
-		if use sparc; then
-			echo "#define XF86CardDrivers sunffb sunleo suncg6 suncg3 suncg14 \
-			suntcx sunbw2 glint mga tdfx ati savage vesa vga fbdev \
-			XF86OSCardDrivers XF86ExtraCardDrivers \
-			DevelDrivers" >> ${HOSTCONF}
-			if has_hardened && ! use dlloader; then
-				einfo "Softening the assembler so cfb modules will play nice with sunffb."
-				echo "#define AsCmd CcCmd -c -x assembler -fno-pie -fno-PIE" >> ${HOSTCONF}
-				echo "#define ModuleAsCmd CcCmd -c -x assembler -fno-pie -fno-PIE" >> ${HOSTCONF}
-			fi
-			if ( [ -e "${ROOT}/usr/src/linux" ] \
-				&& ! kernel_is "2" "6" ) \
-				|| [ "$(uname -r | cut -d. -f1,2)" != "2.6" ]; then
-				einfo "Building for kernels less than 2.6 requires special treatment."
-				echo "#define UseDeprecatedKeyboardDriver YES" >> ${HOSTCONF}
-				einfo "Avoid bug #46593 for sparc32-SMP with kernel 2.4.xx."
-				echo "/* Add a line to avoid bug #56593 on sparc32 */" >> \
-				  programs/Xserver/hw/xfree86/drivers/ati/r128_driver.c
-			fi
-		fi
-
-		# The definitions for fontconfig
-		echo "#define UseFontconfig YES" >> ${HOSTCONF}
-		echo "#define HasFontconfig YES" >> ${HOSTCONF}
-
-		# Use the xorg Xft2 lib
-		echo "#define SharedLibXft YES" >> ${HOSTCONF}
-
-		# with USE="X doc' circular dep w/ virtual/ghostscript
-		# echo "#define HasGhostScript ${DOC}" >> ${HOSTCONF}
-		# Caused issues, basic docs aren't installed
-		use_build doc BuildLinuxDocPS
-		use_build doc BuildSpecsDocs
-		use_build doc BuildHtmlManPages
-		use_build doc InstallHardcopyDocs
-
-		# enable Japanese docs, optionally
-		use doc && use_build cjk InstallJapaneseDocs
-
-		# Native Language Support Fonts
-		use_build nls BuildCyrillicFonts
-		use_build nls BuildArabicFonts
-		use_build nls BuildGreekFonts
-		use_build nls BuildHebrewFonts
-		use_build nls BuildThaiFonts
-
-		if use nls; then
-			use_build cjk BuildCIDFonts
-			use_build cjk BuildJapaneseFonts
-			use_build cjk BuildKoreanFonts
-			use_build cjk BuildChineseFonts
-		fi
-
-		# Crappy bitmap fonts
-		use_build bitmap-fonts Build75DpiFonts
-		use_build bitmap-fonts Build100DpiFonts
-
-		# Type1 fonts
-		use_build type1-fonts BuildType1Fonts
-
-		# TrueType fonts
-		use_build truetype-fonts BuildTrueTypeFonts
-
-		# X Font Server
-		use_build font-server BuildFontServer
-
-		# Distributed Multiheaded X
-		use_build dmx BuildDmx
-
-		use_build insecure-drivers BuildDevelDRIDrivers
-
-		if use ipv6; then
-			# In case Gentoo ever works on a system with IPv6 sockets that don't
-			# also listen on IPv4 (see config/cf/X11.tmpl)
-			echo "#define PreferXdmcpIPv6 YES" >> ${HOSTCONF}
-		fi
-
-		use_build ipv6 BuildIPv6
-
-		if use minimal; then
-			# Don't build static libs
-			echo "#define ForceNormalLib NO" >> ${HOSTCONF}
-			# Turn back on needed ones
-			echo "#define NormalLibXau YES" >> ${HOSTCONF}
-
-			echo "#define BuildDPSLibraries NO" >> ${HOSTCONF}
-			echo "#define BuildClients NO" >> ${HOSTCONF}
-			# BuildClients doesn't catch things in xc/programs/Xserver
-			# Also had to add
-			# 9250_all_6.8.1.904-respect-xfree86configtools-setting.patch
-			echo "#define BuildXFree86ConfigTools NO" >> ${HOSTCONF}
-			echo "#define BuildLBX NO" >> ${HOSTCONF}
-
-			# Weird crap we don't need
-			echo "#define XF8_32Wid NO" >> ${HOSTCONF}
-			echo "#define XF8_32Bpp NO" >> ${HOSTCONF}
-			echo "#define XF8_16Bpp NO" >> ${HOSTCONF}
-			echo "#define XF24_32Bpp NO" >> ${HOSTCONF}
-
-			# Without nls, truetype-fonts, type1-fonts, we only build misc
-			# Now let's try to reduce what gets built in misc
-			# iso8859-1 has the "fixed" font
-			echo "#define BuildISO8859_2Fonts NO" >> ${HOSTCONF}
-			echo "#define BuildISO8859_3Fonts NO" >> ${HOSTCONF}
-			echo "#define BuildISO8859_4Fonts NO" >> ${HOSTCONF}
-			# 5 is cyrillic, 6 isn't in misc, 7 is greek, 8 is hebrew
-			echo "#define BuildISO8859_9Fonts NO" >> ${HOSTCONF}
-			echo "#define BuildISO8859_10Fonts NO" >> ${HOSTCONF}
-			# 11 is thai, 12 isn't in misc
-			echo "#define BuildISO8859_13Fonts NO" >> ${HOSTCONF}
-			echo "#define BuildISO8859_14Fonts NO" >> ${HOSTCONF}
-			echo "#define BuildISO8859_15Fonts NO" >> ${HOSTCONF}
-			echo "#define BuildISO8859_16Fonts NO" >> ${HOSTCONF}
-
-			echo "#define XnestServer NO" >> ${HOSTCONF}
-			echo "#define XVirtualFramebufferServer NO" >> ${HOSTCONF}
-			echo "#define XInputDrivers mouse keyboard" >> ${HOSTCONF}
-
-				# If you want more drivers built with minimal, file a bug
-				# -Donnie Berkholz <spyderous@gentoo.org>
-			if use x86; then
-				# Remove glint, tga, s3, s3virge, rendition, neomagic, i740,
-				# cirrus, tseng, trident, chips, apm, ark, cyrix, siliconmotion
-				# mga, nv, sis, tdfx, savage, GlideDriver, i386Drivers
-				# (nsc, i810), ati, DevelDrivers, via
-				# Leave vmware driver for testing minimal setups using VMWare
-				# XF86OSCardDrivers includes v4l and fbdev on linux
-				# DevelDrivers includes imstt and newport on x86
-				echo "#define XF86CardDrivers vmware vesa vga dummy \
-					XF86OSCardDrivers XF86ExtraCardDrivers" >> ${HOSTCONF}
-			# (#93339)
-			elif use sparc; then
-				echo "#define XF86CardDrivers vesa vga fbdev sunffb suncg6 \
-					sunleo" >> ${HOSTCONF}
-			fi
-		fi
-
-		# Ajax is the man for getting this going for us
-		echo "#define ProPoliceSupport YES" >> ${HOSTCONF}
-
-		# Make xprint optional
-		use_build xprint BuildXprint
-		# Build libXp even when xprint is off. It's just for clients, server
-		if ! use xprint; then
-			echo "#define BuildXprintLib YES" >> ${HOSTCONF}
-		fi
-
-	# End the host.def definitions here
-	eend 0
-}
-
-patch_setup() {
-	einfo "Excluding patches..."
-
-		patch_exclude 9020 9030
-		patch_exclude 9913 9914 9915 9920
-
-		# This patch is just plain broken. Results in random failures.
-		patch_exclude 0120*parallel-make
-
-		# Hardened patches (both broken)
-		patch_exclude 9960_all_4.3.0-exec-shield-GNU
-		patch_exclude 9961_all_4.3.0-libGL-exec-shield
-
-		# Xbox nvidia driver, patch is a total hack, tears apart xc/config/cf
-		# (#68726). Only apply when necessary so we don't screw other stuff up.
-		# 9990 is the driver, 9991 is xbox pci scanning (potentially useful)
-		if [ ! "${PROFILE_ARCH}" = "xbox" ]; then
-			patch_exclude 9990 9991
-		fi
-
-		# this patch comments out the Xserver line in xdm's config
-		# We only want it here
-		if ! use s390; then
-			patch_exclude 7500
-		fi
-
-	#	if ! use gatos; then
-	#		patch_exclude 9841_all_4.3.0-gatos-mesa
-	#	fi
-
-		if use debug; then
-			patch_exclude 5901*acecad-debug
-		fi
-
-		# TDFX_RISKY - 16-bit, 1024x768 or higher on low-memory voodoo3's
-		if use 3dfx && [ "${TDFX_RISKY}" = "yes" ]; then
-			patch_exclude 5850
-		else
-			patch_exclude 5851
-		fi
-
-		# Glibc-specific patches to exclude for non-glibc systems
-		if use elibc_FreeBSD || use elibc_OpenBSD; then
-			patch_exclude 0700
-		fi
-	einfo "Done excluding patches."
-}
-
-use_specific_hacks() {
-	# uclibc lacks sinf and cosf
-	if use uclibc; then
-		sed -i -e 's:GLXCLIENTDIRS = glxinfo glxgears:GLXCLIENTDIRS = :' \
-			${S}/programs/Imakefile
-	fi
-
-	# Get rid of cursor sets other than core and handhelds, saves ~4MB
-	if use minimal; then
-		 sed -i -e 's:SUBDIRS = redglass whiteglass handhelds:SUBDIRS = handhelds:' \
-			${S}/programs/xcursorgen/Imakefile
-	fi
-
-	cd ${S}
-	if use doc; then
-		# These are not included anymore as they are obsolete
-		local x
-		for x in ${S}/programs/Xserver/hw/xfree86/{XF98Conf.cpp,XF98Config}; do
-			if [ -f ${x} ]; then
-				sed -i '/Load[[:space:]]*"\(pex5\|xie\)"/d' ${x}
-			fi
-		done
-	fi
-}
-
-#################
-# src_compile() #
-#################
-
-build() {
-	# If a user defines the MAKE_OPTS variable in /etc/make.conf instead of
-	# MAKEOPTS, they'll redefine an internal xorg Makefile variable and the
-	# xorg build will silently die. This is tricky to track down, so I'm
-	# adding a preemptive fix for this issue by making sure that MAKE_OPTS is
-	# unset. (drobbins, 08 Mar 2003)
-	unset MAKE_OPTS
-
-	einfo "Building xorg-x11..."
-	if use debug; then
-		chmod u+x ${S}/config/util/makeg.sh
-		FAST=1 ${S}/config/util/makeg.sh World WORLDOPTS="" \
-			|| die "debug make World failed"
-	else
-		FAST=1 emake World WORLDOPTS="" MAKE="make" || die "make World failed"
-	fi
-
-	if use nls; then
-		emake -C ${S}/nls MAKE="make" || die "nls build failed"
-	fi
-}
-
-#################
-# src_install() #
-#################
-
-install_everything() {
-	unset MAKE_OPTS
-
-	einfo "Installing X.org X11..."
-	# gcc3 related fix.  Do this during install, so that our
-	# whole build will not be compiled without mmx instructions.
-	if [ "$(gcc-version)" != "2.95" ] && use x86; then
-		make install MAKE="make" DESTDIR=${D} \
-		|| make CDEBUGFLAGS="${CDEBUGFLAGS} -mno-mmx" \
-			CXXDEBUGFLAGS="${CXXDEBUGFLAGS} -mno-mmx" \
-			install MAKE="make" DESTDIR=${D} || die "install failed"
-	else
-		make install MAKE="make" DESTDIR=${D} || die "install failed"
-	fi
-
-	if use sdk; then
-		einfo "Installing X.org X11 SDK..."
-		make install.sdk MAKE="make" DESTDIR=${D} || die "sdk install failed"
-	fi
-
-	if ! use minimal; then
-		einfo "Installing man pages..."
-		make install.man MAKE="make" DESTDIR=${D} || die "man page install failed"
-		einfo "Compressing man pages..."
-		prepman /usr
-	fi
-
-	if use nls; then
-		cd ${S}/nls
-		make MAKE="make" DESTDIR=${D} install || die "nls install failed"
-	fi
-	dodoc ${S}/RELNOTES
-}
-
-backward_compat_install() {
-	# Backwards compatibility for /usr/share move
-	dosym ../../share/fonts /usr/$(get_libdir)/X11/fonts
-
-	# Have the top-level libdir symlink made first, so real dirs don't get created
-	local DIR DIRS
-	if [ "lib" != "$(get_libdir)" ]; then
-		DIRS="${DIRS} $(get_libdir)"
-	fi
-	for DIR in ${DIRS}; do
-		dosym ../${DIR} /usr/X11R6/${DIR}
-	done
-
-	dosym ../../../share/doc/${PF} /usr/X11R6/$(get_libdir)/X11/doc
-}
-
-fix_permissions() {
-	# Fix permissions on locale/common/*.so
-	local x
-	for x in ${D}/usr/$(get_libdir)/X11/locale/$(get_libdir)/common/*.so*; do
-		if [ -f ${x} ]; then
-			fperms 0755 ${x/${D}}
-		fi
-	done
-
-	# Fix permissions on modules ...
-	for x in $(find ${D}/usr/$(get_libdir)/modules -name '*.o' -o -name '*.so'); do
-		if [ -f ${x} ]; then
-			fperms 0755 ${x/${D}}
-		fi
-	done
-
-	# Fix perms
-	if ! use minimal; then
-		fperms 755 /usr/$(get_libdir)/X11/xkb/geometry/sgi /usr/bin/dga
-	fi
-}
-
-zap_host_def_cflags() {
-	ebegin "Fixing $(get_libdir)/X11/config/host.def"
-		cp ${D}/usr/$(get_libdir)/X11/config/host.def ${T}
-		awk '!/OptimizedCDebugFlags|OptimizedCplusplusDebugFlags|GccWarningOptions/ {print $0}' \
-			${T}/host.def > ${D}/usr/$(get_libdir)/X11/config/host.def \
-			|| eerror "Munging host.def failed"
-		# theoretically, /usr/lib/X11/config is a possible candidate for
-		# config file management. If we find that people really worry about imake
-		# stuff, we may add it.  But for now, we leave the dir unprotected.
-	eend 0
-}
-
-add_euro_support() {
-	ebegin "Adding Euro support"
-		LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/$(get_libdir)" \
-		${D}/usr/bin/bdftopcf -t ${WORKDIR}/Xlat9-8x14.bdf | \
-			gzip -9 > ${D}/usr/share/fonts/misc/Xlat9-8x14-lat9.pcf.gz
-		LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/$(get_libdir)" \
-		${D}/usr/bin/bdftopcf -t ${WORKDIR}/Xlat9-9x16.bdf | \
-			gzip -9 > ${D}/usr/share/fonts/misc/Xlat9-9x16-lat9.pcf.gz
-		LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/$(get_libdir)" \
-		${D}/usr/bin/bdftopcf -t ${WORKDIR}/Xlat9-10x20.bdf | \
-			gzip -9 > ${D}/usr/share/fonts/misc/Xlat9-10x20-lat9.pcf.gz
-	eend 0
-}
-
-setup_standard_symlinks() {
-	# Standard symlinks
-	dodir /usr/{bin,include,$(get_libdir)}
-	dosym ../bin /usr/bin/X11
-	# Stop complains about "file or directory not existing"
-	dodir /usr/X11R6
-	dosym ../include /usr/X11R6/include
-	dosym ../../usr/$(get_libdir)/X11/xkb /etc/X11/xkb
-
-	# Some critical directories
-	if ! use minimal; then
-		keepdir /var/lib/xdm
-		dosym ../../../var/lib/xdm /etc/X11/xdm/authdir
-	fi
-
-	# Backwards compat, FHS, etc.
-	dosym ../../usr/X11R6/bin/Xorg /etc/X11/X
-}
-
-libtool_archive_install() {
-	if use opengl; then
-		# .la files for libtool support
-		insinto /usr/$(get_libdir)
-		# (#67729) Needs to be lib, not $(get_libdir)
-		doins ${FILES_DIR}/lib/*.la
-	fi
-}
-
-fix_libtool_libdir_paths() {
-	local dirpath
-	for archive in ${*} ; do
-		dirpath=$(dirname ${archive} | sed -e "s:^${D}::")
-		[[ ${dirpath::1} == "/" ]] || dirpath="/"${dirpath}
-		sed -i ${archive} -e "s:^libdir.*:libdir=\'${dirpath}\':"
-	done
-}
-
-compose_files_install() {
-	# Hack from Mandrake (update ours that just created Compose files for
-	# all locales)
-	local x
-	for x in $(find ${D}/usr/$(get_libdir)/X11/locale/ -mindepth 1 -type d); do
-		# make empty Compose files for some locales
-		# CJK must not have that file (otherwise XIM don't works some times)
-		case $(basename ${x}) in
-			C|microsoft-*|iso8859-*|koi8-*)
-				if [ ! -f ${x}/Compose ]; then
-					touch ${x}/Compose
-				fi
-				;;
-			ja*|ko*|zh*)
-				if [ -r ${x}/Compose ]; then
-					rm -f ${x}/Compose
-				fi
-				;;
-		esac
-	done
-
-	# Another hack from Mandrake -- to fix dead + space for the us
-	# international keyboard
-	local i
-	for i in ${D}/usr/$(get_libdir)/X11/locale/*/Compose; do
-		sed -i \
-			-e 's/\(<dead_diaeresis> <space>\).*$/\1 : "\\"" quotedbl/' \
-			-e "s/\(<dead_acute> <space>\).*$/\1 : \"'\" apostrophe/" ${i} \
-			|| eerror "sed ${i} failed"
-	done
-}
-
-encode_xfsft_files() {
-	# Yet more Mandrake
-	ebegin "Encoding files for xfsft font server"
-		dodir /usr/share/fonts/encodings
-		cp -a ${WORKDIR}/usr/share/fonts/encodings/* \
-			${D}/usr/share/fonts/encodings
-
-		for x in ${D}/usr/share/fonts/encodings/{.,large}/*.enc; do
-			if [ -f "${x}" ]; then
-				gzip -9 -f ${x} \
-					|| eerror "gzipping ${x} failed"
-			fi
-		done
-	eend 0
-}
-
-koi8_fonts_install() {
-	ebegin "Adding gemini-koi8 fonts"
-		cd ${WORKDIR}/ukr
-		gunzip *.Z || eerror "gunzipping gemini-koi8 fonts failed"
-		gzip -9 *.pcf || eerror "gzipping gemini-koi8 fonts failed"
-		cd ${S}
-		cp -a ${WORKDIR}/ukr ${D}/usr/share/fonts \
-			|| eerror "copying gemini-koi8 fonts failed"
-	eend 0
-}
-
-etc_files_install() {
-	insinto /etc/X11
-
-	# Install example config file
-	newins ${S}/programs/Xserver/hw/xfree86/xorg.conf xorg.conf.example
-
-	exeinto /etc/X11
-	# new session management script
-	doexe ${FILES_DIR}/chooser.sh
-	# new display manager script
-	doexe ${FILES_DIR}/startDM.sh
-	exeinto /etc/X11/Sessions
-	# doexe skips directories, so this should be safe
-	doexe ${FILES_DIR}/Sessions/*
-	insinto /etc/env.d
-	doins ${FILES_DIR}/10xorg
-	insinto /etc/X11/xinit
-	doins ${FILES_DIR}/xinitrc
-	if ! use minimal; then
-		exeinto /etc/X11/xdm
-		doexe ${FILES_DIR}/Xsession
-		exeinto /etc/init.d
-		newexe ${FILES_DIR}/xdm.start xdm
-	fi
-	if use font-server; then
-		insinto /etc/X11/fs
-		newins ${FILES_DIR}/xfs.config config
-	fi
-	if use pam; then
-		insinto /etc/pam.d
-		newins ${FILES_DIR}/xdm.pamd xdm
-		# Need to fix console permissions first
-		newins ${FILES_DIR}/xserver.pamd xserver
-	fi
-	if use font-server; then
-		newexe ${FILES_DIR}/xfs.start xfs
-		insinto /etc/conf.d
-		newins ${FILES_DIR}/xfs.conf.d xfs
-	fi
-}
-
-dynamic_libgl_install() {
-	# next section is to setup the dynamic libGL stuff
-	ebegin "Moving libGL and friends for dynamic switching"
-		dodir /usr/$(get_libdir)/opengl/${PN}/{lib,extensions,include}
-		local x=""
-		for x in ${D}/usr/$(get_libdir)/libGL.so* \
-			${D}/usr/$(get_libdir)/libGL.la \
-			${D}/usr/$(get_libdir)/libGL.a; do
-			if [ -f ${x} -o -L ${x} ]; then
-				# libGL.a cause problems with tuxracer, etc
-				mv -f ${x} ${D}/usr/$(get_libdir)/opengl/${PN}/lib
-			fi
-		done
-			for x in ${D}/usr/$(get_libdir)/modules/extensions/libglx*; do
-			if [ -f ${x} -o -L ${x} ]; then
-				mv -f ${x} ${D}/usr/$(get_libdir)/opengl/${PN}/extensions
-			fi
-		done
-		# glext.h added for #54984
-		for x in ${D}/usr/include/GL/{gl.h,glx.h,glxtokens.h,glext.h,glxext.h,glxmd.h,glxproto.h}; do
-			if [ -f ${x} -o -L ${x} ]; then
-				mv -f ${x} ${D}/usr/$(get_libdir)/opengl/${PN}/include
-			fi
-		done
-	eend 0
-}
-
-cursor_install() {
-	# Make the core cursor the default.  People seem not to like whiteglass
-	# for some reason.
-	dosed 's:whiteglass:core:' /usr/share/cursors/${PN}/default/index.theme
-
-	if ! use minimal; then
-		install_extra_cursors
-	fi
-}
-
-strip_execs() {
-	if use debug || has nostrip ${FEATURES}; then
-		ewarn "Debug build turned on by USE=debug"
-		ewarn "NOT stripping binaries and libraries"
-	else
-		local STRIP
-		if [ ! -z "${CBUILD}" ] && [ "${CBUILD}" != "${CHOST}" ]; then
-			STRIP=${CHOST}-strip
-		else
-			STRIP=strip
-		fi
-		einfo "Stripping binaries and libraries..."
-		# This bit I got from Redhat ... strip binaries and drivers ..
-		# NOTE:  We do NOT want to strip the drivers, modules or DRI modules!
-		local x
-		for x in $(find ${D}/ -type f -perm +0111 -exec file {} \; | \
-		           grep -v ' shared object,' | \
-		           sed -n -e 's/^\(.*\):[  ]*ELF.*, not stripped/\1/p'); do
-			if [ -f ${x} ]; then
-				# Dont do the modules ...
-				if [ "${x/\/usr\/$(get_libdir)\/modules}" = "${x}" ]; then
-					echo "$(echo ${x/${D}})"
-					${STRIP} ${x} || :
-				fi
-			fi
-		done
-		# Now do the libraries ...
-		for x in ${D}/usr/{$(get_libdir),$(get_libdir)/opengl/${PN}/lib}/*.so.* \
-			$(get_libdir)/X11/locale/$(get_libdir)/common}/*.so.*; do
-			if [ -f ${x} ]; then
-				echo "$(echo ${x/${D}})"
-				${STRIP} --strip-debug ${x} || :
-			fi
-		done
-	fi
-}
-
-install_extra_cursors() {
-	# Install TaD's gentoo cursors
-	insinto /usr/share/cursors/${PN}/gentoo/cursors
-	doins ${WORKDIR}/cursors/gentoo/cursors/*
-	insinto /usr/share/cursors/${PN}/gentoo-blue/cursors
-	doins ${WORKDIR}/cursors/gentoo-blue/cursors/*
-	insinto /usr/share/cursors/${PN}/gentoo-silver/cursors
-	doins ${WORKDIR}/cursors/gentoo-silver/cursors/*
-}
-
-minimal_install() {
-		# Get rid of all unnecessary fonts (saves ~5.5 MB)
-		find ${D}/usr/share/fonts/misc/ -name '*.pcf.gz' \
-			-not -name '*6x13*' -not -name 'cursor.pcf.gz' -exec rm {} \;
-		# Woohoo, another 772K
-		rm -rf ${D}/usr/share/doc
-}
-
-xprint_install() {
-	# If we want xprint, save the init script before deleting /etc/rc.d/
-	# Requested on #68316
-	if use xprint; then
-		xprint_init_install
-	else
-		# delete xprint stuff
-		rm -f ${D}/etc/{init,profile}.d/xprint*
-		rmdir --ignore-fail-on-non-empty ${D}/etc/{init,profile}.d
-	fi
-
-	# Remove the /etc/rc.d nonsense -- not everyone is RedHat
-	rm -rf ${D}/etc/rc.d
-}
-
-xprint_init_install() {
-	# RH-style init script, we provide a wrapper
-	exeinto /usr/$(get_libdir)/misc
-	doexe ${D}/etc/init.d/xprint
-	rm -f ${D}/etc/init.d/xprint
-	# Install the wrapper
-	newinitd ${FILES_DIR}/xprint.init xprint
-	# patch profile scripts
-	sed -i -e "s:/bin/sh.*get_xpserverlist:/usr/$(get_libdir)/misc/xprint get_xpserverlist:g" ${D}/etc/profile.d/xprint*
-	# move profile scripts, we can't touch /etc/profile.d/ in Gentoo
-	dodoc ${D}/etc/profile.d/xprint*
-	rm -f ${D}/etc/profile.d/xprint*
-}
-
-config_files_install() {
-
-	# Fix default config files after installing fonts to /usr/share/fonts
-	sed -i -e "s:/usr/X11R6/$(get_libdir)/X11/fonts:/usr/share/fonts:g" \
-		-e "s:/usr/$(get_libdir)/X11/fonts:/usr/share/fonts:g" \
-		-e "s:/usr/$(get_libdir)/fonts:/usr/share/fonts:g" \
-		${D}/etc/X11/xorg.conf.example
-	if use font-server; then
-		sed -i "s:/usr/X11R6/$(get_libdir)/X11/fonts:/usr/share/fonts:g" \
-			${D}/etc/X11/fs/config
-	fi
-
-	# Work around upgrade problem where people have
-	# Option "XkbRules" "xfree86" in their config file
-	sed -i "s:^.*Option.*"XkbRules".*$::g" ${D}/etc/X11/xorg.conf.example
-}
-
-fix_opengl_symlinks() {
-	# Remove invalid symlinks
-	local LINK
-	for LINK in $(find ${D}/usr/$(get_libdir) \
-		-name libGL.* -type l); do
-		rm -f ${LINK}
-	done
-	# Create required symlinks
-	dosym libGL.so.1.2 /usr/$(get_libdir)/libGL.so
-	dosym libGL.so.1.2 /usr/$(get_libdir)/libGL.so.1
-}
-
-#################
-# pkg_preinst() #
-#################
-
-# We need a symlink /usr/X11R6/dir -> /usr/dir so all the packages
-# whose files we move don't lose track of them. As such, we need
-# _absolutely nothing_ in /usr/X11R6/dir so we can make such a symlink.
-# Donnie Berkholz <spyderous@gentoo.org> 20 October 2004
-#
-# Takes two arguments -- starting location and ending location
-migrate() {
-	einfo "Migrating from ${1} to ${2}..."
-
-	# Strip trailing slash
-	if [ -z "${1##*/}" ]; then
-		set -- ${1%/} ${2}
-	fi
-
-	if [ -e ${ROOT}${1} ]; then
-		# If it's not a symlink (in other words, it should be a directory)
-		if [ ! -L ${ROOT}${1} ]; then
-			einfo "  ${1} isn't a symlink, migrating..."
-			# Move everything
-				rsync \
-					--archive \
-					--update \
-					--links \
-					--hard-links \
-					--ignore-existing \
-					--stats \
-					--progress \
-					--verbose \
-					${ROOT}${1}/ ${ROOT}${2} > ${T}/migrate-${1//\//-}.log 2>&1
-
-				check_migrate_return
-				remove_migrated_files ${1}
-
-			if [ -e "${ROOT}${1}" ]; then
-				# Remove any floating .keep files so we can run rmdir
-				find ${ROOT}${1} -name '\.keep' -exec rm -f {} \;
-				# Get rid of the directory
-				rmdir ${ROOT}${1}
-			fi
-
-			make_symlinks ${1}
-		else
-			ewarn "    ${1} is a symlink, not migrating"
-		fi
-	else
-		ewarn "  ${1} doesn't exist, not migrating"
-		make_symlinks ${1}
-	fi
-}
-
-check_migrate_return() {
-	MIGRATE_RETURN="$?"
-	if [ "${MIGRATE_RETURN}" -eq "0" ]; then
-		einfo "rsync successful!"
-	else
-		die "rsync failed. Exit code: ${MIGRATE_RETURN}."
-	fi
-
-	# Migration fubars lib symlinks -- eradicator
-	if use amd64; then
-		if [[ -L ${ROOT}usr/lib64 ]]; then
-			rm ${ROOT}usr/lib64
-			ln -s lib ${ROOT}usr/lib64
-		elif [[ -L ${ROOT}usr/lib ]]; then
-			rm -f ${ROOT}usr/lib
-			ln -s lib64 ${ROOT}usr/lib
-		elif [[ -L ${ROOT}usr/lib32 ]]; then
-			if has_multilib_profile; then
-			ln -s lib ${ROOT}usr/lib32
-			else
-				ln -s ../emul/linux/x86/usr/lib ${ROOT}usr/lib32
-			fi
-		fi
-	fi
-}
-
-remove_migrated_files() {
-	# This is a copy instead of a move, so we need to get rid of what
-	# we copied. This is a little risky if it fails, so just do it on
-	# success.
-
-	# DO NOT proceed if we don't have an argument, or we kill root filesystem
-	if [ -z "${1}" ]; then
-		die "No argument to remove_migrated_files(). Want to `rm -rf ${ROOT}`?"
-	fi
-
-	if [ "${MIGRATE_RETURN}" -eq "0" ]; then
-#		rm -rfv ${ROOT}${1} > ${T}/migrate-remove-${1//\//-}.log 2>&1
-		rm -rfv ${ROOT}${1}
-	fi
-}
-
-make_symlinks() {
-			# Put a symlink in its place
-
-			# Special case: lib != libdir
-			if [ "${1##*/}" = "$(get_libdir)" -a "$(get_libdir)" != "lib" ]; then
-				einfo "    Symlinking ${ROOT}usr/X11R6/lib -> $(get_libdir)"
-				ln -s $(get_libdir) ${ROOT}usr/X11R6/lib
-			# Special case: fonts
-			elif [ "${1##*/}" = "fonts" ]; then
-				einfo "    Symlinking ${ROOT}${1} -> ../../share/fonts"
-				ln -s ../../share/fonts ${ROOT}${1}
-			# Special case: X11R6
-			elif [ "${1##*/}" = "X11R6" ]; then
-				einfo "    Symlinking ${ROOT}${1} -> ../usr"
-				ln -s ../usr ${ROOT}${1}
-			else
-				einfo "    Symlinking ${ROOT}${1} -> ../${1##*/}"
-				ln -s ../${1##*/} ${ROOT}${1}
-			fi
-}
-
-update_config_files() {
-	# Fix any installed config files for installing fonts to /usr/share/fonts
-	# This *needs* to be after all other installation so files aren't
-	# overwritten.
-
-	if [ "${ROOT}" = "/" ]; then
-		einfo "Preparing any installed configuration files for font move..."
-		FILES="/etc/X11/xorg.conf
-			/etc/X11/XF86Config-4
-			/etc/X11/XF86Config"
-		if use font-server; then
-			FILES="${FILES} /etc/X11/fs/config"
-		fi
-		#	/etc/fonts/fonts.conf
-		#	/etc/fonts/local.conf
-
-		local FILE
-		for FILE in ${FILES}; do
-			if [ -e ${FILE} ]; then
-				# New font paths
-				sed "s,/usr/X11R6/$(get_libdir)/X11/fonts,/usr/share/fonts,g" \
-					${ROOT}${FILE} > ${IMAGE}${FILE}
-
-				if [ "${FILE}" = "/etc/X11/xorg.conf" ] \
-					|| [ "${FILE}" = "/etc/X11/XF86Config" ] \
-					|| [ "${FILE}" = "/etc/X11/XF86Config-4" ]; then
-					# "keyboard" driver is deprecated and will be removed,
-					# switch to "kbd"
-					sed -i 's~^\([ \t]*Driver[ \t]\+\)"[kK]eyboard"~\1"kbd"~' \
-						${IMAGE}${FILE}
-
-					# This moved in the /usr/X11R6/libdir -> /usr/libdir change
-					sed -i \
-						-e 's~^\([ \t]*RgbPath[ \t]\+\)"/usr/X11R6/$(get_libdir)/X11/rgb"~\1"/usr/$(get_libdir)/X11/rgb"~' \
-						-e 's~^\([ \t]*RgbPath[ \t]\+\)"/usr/X11R6/lib/X11/rgb"~\1"/usr/lib/X11/rgb"~' \
-						${IMAGE}${FILE}
-
-					# Work around upgrade problem where people have
-					# Option "XkbRules" "xfree86" in their config file
-					sed -i "s:^.*Option.*\"XkbRules\".*$::g" \
-						${IMAGE}${FILE}
-				fi
-			fi
-		done
-	fi
-}
-
-cleanup_fonts() {
-	local G_FONTDIRS
-	G_FONTDIRS="Speedo encodings local misc util"
-	if use truetype-fonts; then
-		G_FONTDIRS="${G_FONTDIRS} TTF"
-	fi
-	if use type1-fonts; then
-		G_FONTDIRS="${G_FONTDIRS} Type1"
-	fi
-	if use cjk; then
-		G_FONTDIRS="${G_FONTDIRS} CID"
-	fi
-	if use bitmap-fonts; then
-		G_FONTDIRS="${G_FONTDIRS} 75dpi 100dpi"
-	fi
-	if use nls; then
-		G_FONTDIRS="${G_FONTDIRS} cyrillic ukr"
-	fi
-
-	for G_FONTDIR in ${G_FONTDIRS}; do
-		# clean out old fonts.* and encodings.dir files, as we
-		# will regenerate them
-		# Not Speedo or CID, as their fonts.scale files are "real"
-		if [ "${G_FONTDIR}" != "CID" -a "${G_FONTDIR}" != "Speedo" ]; then
-			find ${ROOT}/usr/share/fonts/${G_FONTDIR} -type f -name 'fonts.*' \
-				-o -name 'encodings.dir' -exec rm -fv {} \;
-		fi
-	done
-
-	# Get rid of deprecated directories so our symlinks in the same location
-	# work -- users shouldn't be placing fonts here so that should be fine,
-	# they should be using ~/.fonts or /usr/share/fonts. <spyderous>
-	remove_font_dirs
-}
-
-remove_font_dirs() {
-	if [ -e ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts ]; then
-		if [ ! -L ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts ]; then
-			local G_FONTDIR
-			for G_FONTDIR in ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/*; do
-				if [ -L "${G_FONTDIR}" ]; then
-					einfo "Removing ${G_FONTDIR} symlink."
-					rm -rfv ${G_FONTDIR}
-				else
-					ewarn "${G_FONTDIR} not a symlink, moving to /usr/share/fonts"
-					if [ -d ${G_FONTDIR} ]; then
-						if [ ! -e /usr/share/fonts/${G_FONTDIR##*/} ]; then
-							einfo "Moving ${G_FONTDIR} to /usr/share/fonts/."
-							mv ${G_FONTDIR} /usr/share/fonts/
-						else
-							ewarn "/usr/share/fonts/${G_FONTDIR##*/} exists. Remove it and try again."
-						fi
-					else
-						ewarn "${G_FONTDIR} does not exist."
-					fi
-				fi
-			done
-		fi
-	else
-		ewarn "${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts does not exist."
-	fi
-}
-
-move_app_defaults_to_etc() {
-	if [ -L ${ROOT}/etc/X11/app-defaults ]; then
-		rm -f ${ROOT}/etc/X11/app-defaults
-	fi
-
-	if [ ! -L ${ROOT}/usr/$(get_libdir)/app-defaults ] \
-		&& [ -d ${ROOT}/usr/$(get_libdir)/app-defaults ]; then
-		if [ ! -d ${ROOT}/etc/X11/app-defaults ]; then
-			mkdir -p ${ROOT}/etc/X11/app-defaults
-		fi
-
-		mv -f ${ROOT}/usr/$(get_libdir)/app-defaults ${ROOT}/etc/X11
-	fi
-}
-
-move_xkb_to_usr() {
-	if [ -L ${ROOT}/usr/$(get_libdir)/xkb ]; then
-		rm -f ${ROOT}/usr/$(get_libdir)/xkb
-	fi
-
-	if [ ! -L ${ROOT}/etc/X11/xkb ] \
-		&& [ -d ${ROOT}/etc/X11/xkb ]; then
-		if [ ! -d ${ROOT}/usr/$(get_libdir)/xkb ]; then
-			mkdir -p ${ROOT}/usr/$(get_libdir)
-		fi
-
-	    mv -f ${ROOT}/etc/X11/xkb ${ROOT}/usr/$(get_libdir)
-	fi
-}
-
-dynamic_libgl_preinst() {
-	# clean the dynamic libGL stuff's home to ensure
-	# we don't have stale libs floating around
-	if [ -d ${ROOT}/usr/$(get_libdir)/opengl/${PN} ]; then
-		rm -rf ${ROOT}/usr/$(get_libdir)/opengl/${PN}/*
-	fi
-
-	# make sure we do not have any stale files lying around
-	# that could break things. Check old and new locations.
-	rm -f ${ROOT}/usr/X11R6/$(get_libdir)/libGL\.* \
-		${ROOT}/usr/$(get_libdir)/libGL\.*
-}
-
-##################
-# pkg_postinst() #
-##################
-
-font_setup() {
-	umask 022
-
-	# These cause ttmkfdir to segfault :/
-	rm -f ${ROOT}/usr/share/fonts/encodings/iso8859-6.8x.enc.gz
-	rm -f ${ROOT}/usr/share/fonts/encodings/iso8859-6.16.enc.gz
-#	rm -f ${ROOT}/usr/share/fonts/encodings/large/cns11643-1.enc
-#	rm -f ${ROOT}/usr/share/fonts/encodings/large/cns11643-2.enc
-#	rm -f ${ROOT}/usr/share/fonts/encodings/large/cns11643-3.enc
-#	rm -f ${ROOT}/usr/share/fonts/encodings/suneu-greek.enc
-
-	# ********************************************************************
-	#  A note about fonts and needed files:
-	#
-	#  1)  Create /usr/share/fonts/encodings/encodings.dir
-	#
-	#  2)  Create fonts.scale for TrueType fonts (need to do this before
-	#      we create fonts.dir files, else fonts.dir files will be
-	#      invalid for TrueType fonts...)
-	#
-	#  3)  Now Generate fonts.dir files.
-	#
-	#  CID fonts is a bit more involved, but as we do not install any,
-	#  thus I am not going to bother.
-	#
-	#  <azarah@gentoo.org> (20 Oct 2002)
-	#
-	# ********************************************************************
-
-	ebegin "Generating encodings.dir"
-		# Create the encodings.dir in /usr/share/fonts/encodings
-		LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir)" \
-		${ROOT}/usr/bin/mkfontdir -n \
-			-e ${ROOT}/usr/share/fonts/encodings \
-			-e ${ROOT}/usr/share/fonts/encodings/large \
-			-- ${ROOT}/usr/share/fonts/encodings
-
-	eend 0
-
-	ebegin "Creating fonts.scale files"
-		local x
-		for x in $(find ${ROOT}/usr/share/fonts/* -maxdepth 1 -type d); do
-			[ -z "$(ls ${x}/)" ] && continue
-			[ "$(ls ${x}/)" = "fonts.cache-1" ] && continue
-
-			# Only generate .scale files if truetype, opentype or type1
-			# fonts are present ...
-
-			# First truetype (ttf,ttc)
-			# NOTE: ttmkfdir does NOT work on type1 fonts (#53753)
-			# Also, there is no way to regenerate Speedo/CID fonts.scale
-			# <spyderous@gentoo.org> 2 August 2004
-			if [ "${x/encodings}" = "${x}" -a \
-				-n "$(find ${x} -iname '*.tt[cf]' -print)" ]; then
-				if [ -x ${ROOT}/usr/bin/ttmkfdir ]; then
-					LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir)" \
-					${ROOT}/usr/bin/ttmkfdir -x 2 \
-						-e ${ROOT}/usr/share/fonts/encodings/encodings.dir \
-						-o ${x}/fonts.scale -d ${x}
-					# ttmkfdir fails on some stuff, so try mkfontscale if it does
-					local ttmkfdir_return=$?
-				else
-					# We didn't use ttmkfdir at all
-					local ttmkfdir_return=2
-				fi
-				if [ ${ttmkfdir_return} -ne 1 ]; then
-					LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir)" \
-					${ROOT}/usr/bin/mkfontscale \
-						-a /usr/share/fonts/encodings/encodings.dir \
-						-- ${x}
-				fi
-			# Next type1 and opentype (pfa,pfb,otf,otc)
-			elif [ "${x/encodings}" = "${x}" -a \
-				-n "$(find ${x} -iname '*.[po][ft][abcf]' -print)" ]; then
-				LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir)" \
-				${ROOT}/usr/bin/mkfontscale \
-					-a ${ROOT}/usr/share/fonts/encodings/encodings.dir \
-					-- ${x}
-			fi
-		done
-	eend 0
-
-	ebegin "Generating fonts.dir files"
-		for x in $(find ${ROOT}/usr/share/fonts/* -maxdepth 1 -type d); do
-			[ -z "$(ls ${x}/)" ] && continue
-			[ "$(ls ${x}/)" = "fonts.cache-1" ] && continue
-
-			if [ "${x/encodings}" = "${x}" ]; then
-				LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir)" \
-				${ROOT}/usr/bin/mkfontdir \
-					-e ${ROOT}/usr/share/fonts/encodings \
-					-e ${ROOT}/usr/share/fonts/encodings/large \
-					-- ${x}
-			fi
-		done
-	eend 0
-
-	ebegin "Generating Xft cache"
-		for x in $(find ${ROOT}/usr/share/fonts/* -maxdepth 1 -type d); do
-			[ -z "$(ls ${x}/)" ] && continue
-			[ "$(ls ${x}/)" = "fonts.cache-1" ] && continue
-
-			# Only generate XftCache files if there are truetype
-			# fonts present ...
-			if [ "${x/encodings}" = "${x}" -a \
-			     -n "$(find ${x} -iname '*.[otps][pft][cfad]' -print)" ]; then
-				LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir)" \
-				${ROOT}/usr/bin/xftcache ${x} &> /dev/null
-			fi
-		done
-	eend 0
-
-	ebegin "Fixing permissions"
-		find ${ROOT}/usr/share/fonts/ -type f -name 'font.*' \
-			-exec chmod 0644 {} \;
-	eend 0
-
-	# danarmak found out that fc-cache should be run AFTER all the above
-	# stuff, as otherwise the cache is invalid, and has to be run again
-	# as root anyway
-	if [ -x ${ROOT}/usr/bin/fc-cache ]; then
-		ebegin "Creating FC font cache"
-			HOME="/root" ${ROOT}/usr/bin/fc-cache
-		eend 0
-	fi
-}
-
-switch_opengl_implem() {
-		# Switch to the xorg implementation.
-		# Use new opengl-update that will not reset user selected
-		# OpenGL interface ...
-		echo
-		local opengl_implem="$(${ROOT}/usr/sbin/opengl-update --get-implementation)"
-		${ROOT}/usr/sbin/opengl-update --use-old ${PN}
-}
-
-remove_old_compose_files() {
-	for x in $(find ${ROOT}/usr/$(get_libdir)/X11/locale/ -mindepth 1 -type d); do
-		# Remove old compose files we might have created incorrectly
-		# CJK must not have that file (otherwise XIM don't works some times)
-		case $(basename ${x}) in
-			ja*|ko*|zh*)
-				if [ -r "${x}/Compose" ]; then
-					rm -f ${x}/Compose
-				fi
-				;;
-		esac
-	done
-}
-
-setup_tmp_files() {
-	# These need to be owned by root and the correct permissions
-	# (bug #8281)
-	local x=""
-	for x in ${ROOT}/tmp/.{ICE,X11}-unix; do
-		if [ ! -d ${x} ]; then
-			mkdir -p ${x}
-		fi
-
-		chown root:wheel ${x}
-		chmod 1777 ${x}
-	done
-}
-
-print_info() {
-	echo
-	einfo "Please note that the xcursors are in /usr/share/cursors/${PN}."
-	einfo "Any custom cursor sets should be placed in that directory."
-	echo
-	einfo "If you wish to set system-wide default cursors, please create"
-	einfo "/usr/local/share/cursors/${PN}/default/index.theme"
-	einfo "with content: \"Inherits=theme_name\" so that future"
-	einfo "emerges will not overwrite those settings."
-	echo
-	einfo "Listening on TCP is disabled by default with startx."
-	einfo "To enable it, edit /usr/bin/startx."
-	echo
-
-	einfo "If you have a Radeon, set this option for direct rendering:"
-	einfo "Option \"ColorTiling\" \"false\""
-	einfo "The Mesa in these developmental snapshots is out of date."
-	echo
-	einfo "Binary drivers may be broken in >=6.8.99.8."
-	einfo "See https://bugs.freedesktop.org/show_bug.cgi?id=3066."
-
-	# (#76985)
-	einfo "Visit http://www.gentoo.org/doc/en/index.xml?catid=desktop"
-	einfo "for more information on configuring X."
-
-	# Try to get people to read this, pending #11359
-	ebeep 5
-	epause 10
-}
-
-fix_links() {
-	# Fix problematic links
-	if [ -x ${ROOT}/usr/bin/Xorg ]; then
-		ln -snf ../bin ${ROOT}/usr/bin/X11
-	fi
-}