https://bugs.gentoo.org/318845 https://www.cs.unipr.it/mantis/view.php?id=102 --- ppl-0.10.2.orig/m4/ac_check_gmp.m4 +++ ppl-0.10.2/m4/ac_check_gmp.m4 @@ -1,5 +1,5 @@ dnl A function to check for the existence and usability of GMP. -dnl Copyright (C) 2001-2009 Roberto Bagnara +dnl Copyright (C) 2001-2010 Roberto Bagnara dnl dnl This file is part of the Parma Polyhedra Library (PPL). dnl @@ -32,6 +32,23 @@ fi fi +AC_ARG_WITH(gmp-build, + AS_HELP_STRING([--with-gmp-build=DIR], + [use a non-installed build of GMP in DIR]), + gmp_build_dir=$with_gmp_build + if test -z "$with_libgmp_prefix" + then + CPPFLAGS="$CPPFLAGS -I$gmp_build_dir -I$gmp_build_dir/tune" + LDFLAGS="$LDFLAGS -L$gmp_build_dir -L$gmp_build_dir/.libs" + LDFLAGS="$LDFLAGS -L$gmp_build_dir/tune" + else + AC_MSG_ERROR([cannot use --with-gmp-build and --with-gmp-prefix together]) + fi) + +dnl Both libgmp and libbmpxx come from the gmp package. +AC_LIB_FROMPACKAGE([gmp], [gmp]) +AC_LIB_FROMPACKAGE([gmpxx], [gmp]) + dnl Check how to link with libgmp. AC_LIB_LINKFLAGS([gmp]) @@ -54,6 +71,10 @@ #GMP version 4.1.3 or higher is required #endif +#ifndef BITS_PER_MP_LIMB +#define BITS_PER_MP_LIMB GMP_LIMB_BITS +#endif + int main() { std::string header_version; @@ -80,11 +101,11 @@ return 1; } - if (sizeof(mp_limb_t)*CHAR_BIT != GMP_LIMB_BITS - || GMP_LIMB_BITS != mp_bits_per_limb) { + if (sizeof(mp_limb_t)*CHAR_BIT != BITS_PER_MP_LIMB + || BITS_PER_MP_LIMB != mp_bits_per_limb) { std::cerr << "GMP header (gmp.h) and library (ligmp.*) bits-per-limb mismatch:\n" - << "header gives " << __GMP_BITS_PER_MP_LIMB << ";\n" + << "header gives " << BITS_PER_MP_LIMB << ";\n" << "library gives " << mp_bits_per_limb << ".\n" << "This probably means you are on a bi-arch system and\n" << "you are compiling with the wrong header or linking with\n" @@ -180,3 +201,4 @@ dnl We use libtool, therefore we take $LTLIBGMPXX, not $LIBGMPXX. gmp_library_option="$LTLIBGMPXX" ]) + --- ppl-0.10.2.orig/m4/lib-ld.m4 +++ ppl-0.10.2/m4/lib-ld.m4 @@ -1,5 +1,5 @@ -# lib-ld.m4 serial 3 (gettext-0.13) -dnl Copyright (C) 1996-2003 Free Software Foundation, Inc. +# lib-ld.m4 serial 4 (gettext-0.18) +dnl Copyright (C) 1996-2003, 2009 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. @@ -10,7 +10,7 @@ dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no. AC_DEFUN([AC_LIB_PROG_LD_GNU], -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld, +[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld], [# I'd rather use --version here, but apparently some GNU ld's only accept -v. case `$LD -v 2>&1 = 1.10 to complain if config.rpath is missing. @@ -101,7 +117,7 @@ AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir - AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [ + AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh . ./conftest.sh @@ -109,34 +125,66 @@ acl_cv_rpath=done ]) wl="$acl_cv_wl" - libext="$acl_cv_libext" - shlibext="$acl_cv_shlibext" - hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" - hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" - hardcode_direct="$acl_cv_hardcode_direct" - hardcode_minus_L="$acl_cv_hardcode_minus_L" + acl_libext="$acl_cv_libext" + acl_shlibext="$acl_cv_shlibext" + acl_libname_spec="$acl_cv_libname_spec" + acl_library_names_spec="$acl_cv_library_names_spec" + acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" + acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" + acl_hardcode_direct="$acl_cv_hardcode_direct" + acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" dnl Determine whether the user wants rpath handling at all. - AC_ARG_ENABLE(rpath, + AC_ARG_ENABLE([rpath], [ --disable-rpath do not hardcode runtime library paths], :, enable_rpath=yes) ]) +dnl AC_LIB_FROMPACKAGE(name, package) +dnl declares that libname comes from the given package. The configure file +dnl will then not have a --with-libname-prefix option but a +dnl --with-package-prefix option. Several libraries can come from the same +dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar +dnl macro call that searches for libname. +AC_DEFUN([AC_LIB_FROMPACKAGE], +[ + pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + define([acl_frompackage_]NAME, [$2]) + popdef([NAME]) + pushdef([PACK],[$2]) + pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + define([acl_libsinpackage_]PACKUP, + m4_ifdef([acl_libsinpackage_]PACKUP, [acl_libsinpackage_]PACKUP[[, ]],)[lib$1]) + popdef([PACKUP]) + popdef([PACK]) +]) + dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and dnl the libraries corresponding to explicit and implicit dependencies. dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. +dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found +dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem. AC_DEFUN([AC_LIB_LINKFLAGS_BODY], [ - define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) + pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])]) + pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])]) + dnl Autoconf >= 2.61 supports dots in --with options. + pushdef([P_A_C_K],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[translit(PACK,[.],[_])],PACK)]) dnl By default, look in $includedir and $libdir. use_additional=yes AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) - AC_LIB_ARG_WITH([lib$1-prefix], -[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib - --without-lib$1-prefix don't search for lib$1 in includedir and libdir], + AC_ARG_WITH(P_A_C_K[-prefix], +[[ --with-]]P_A_C_K[[-prefix[=DIR] search for ]PACKLIBS[ in DIR/include and DIR/lib + --without-]]P_A_C_K[[-prefix don't search for ]PACKLIBS[ in includedir and libdir]], [ if test "X$withval" = "Xno"; then use_additional=no @@ -148,7 +196,11 @@ ]) else additional_includedir="$withval/include" - additional_libdir="$withval/lib" + additional_libdir="$withval/$acl_libdirstem" + if test "$acl_libdirstem2" != "$acl_libdirstem" \ + && ! test -d "$withval/$acl_libdirstem"; then + additional_libdir="$withval/$acl_libdirstem2" + fi fi fi ]) @@ -157,6 +209,10 @@ LIB[]NAME= LTLIB[]NAME= INC[]NAME= + LIB[]NAME[]_PREFIX= + dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been + dnl computed. So it has to be reset here. + HAVE_LIB[]NAME= rpathdirs= ltrpathdirs= names_already_handled= @@ -196,22 +252,55 @@ found_la= found_so= found_a= + eval libname=\"$acl_libname_spec\" # typically: libname=lib$name + if test -n "$acl_shlibext"; then + shrext=".$acl_shlibext" # typically: shrext=.so + else + shrext= + fi if test $use_additional = yes; then - if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then - found_dir="$additional_libdir" - found_so="$additional_libdir/lib$name.$shlibext" - if test -f "$additional_libdir/lib$name.la"; then - found_la="$additional_libdir/lib$name.la" - fi - else - if test -f "$additional_libdir/lib$name.$libext"; then - found_dir="$additional_libdir" - found_a="$additional_libdir/lib$name.$libext" - if test -f "$additional_libdir/lib$name.la"; then - found_la="$additional_libdir/lib$name.la" + dir="$additional_libdir" + dnl The same code as in the loop below: + dnl First look for a shared library. + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done fi fi fi + dnl Then look for a static library. + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi fi if test "X$found_dir" = "X"; then for x in $LDFLAGS $LTLIB[]NAME; do @@ -219,21 +308,46 @@ case "$x" in -L*) dir=`echo "X$x" | sed -e 's/^X-L//'` - if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then - found_dir="$dir" - found_so="$dir/lib$name.$shlibext" - if test -f "$dir/lib$name.la"; then - found_la="$dir/lib$name.la" - fi - else - if test -f "$dir/lib$name.$libext"; then + dnl First look for a shared library. + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then found_dir="$dir" - found_a="$dir/lib$name.$libext" - if test -f "$dir/lib$name.la"; then - found_la="$dir/lib$name.la" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done fi fi fi + dnl Then look for a static library. + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi ;; esac if test "X$found_dir" != "X"; then @@ -248,7 +362,9 @@ dnl Linking with a shared library. We attempt to hardcode its dnl directory into the executable's runpath, unless it's the dnl standard /usr/lib. - if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then + if test "$enable_rpath" = no \ + || test "X$found_dir" = "X/usr/$acl_libdirstem" \ + || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then dnl No hardcoding is needed. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else @@ -267,12 +383,12 @@ ltrpathdirs="$ltrpathdirs $found_dir" fi dnl The hardcoding into $LIBNAME is system dependent. - if test "$hardcode_direct" = yes; then + if test "$acl_hardcode_direct" = yes; then dnl Using DIR/libNAME.so during linking hardcodes DIR into the dnl resulting binary. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else - if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then + if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then dnl Use an explicit option to hardcode DIR into the resulting dnl binary. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" @@ -303,13 +419,13 @@ if test -z "$haveit"; then LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" fi - if test "$hardcode_minus_L" != no; then + if test "$acl_hardcode_minus_L" != no; then dnl FIXME: Not sure whether we should use dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" dnl here. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else - dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH + dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH dnl here, because this doesn't fit in flags passed to the dnl compiler. So give up. No hardcoding. This affects only dnl very old systems. @@ -334,8 +450,18 @@ dnl Assume the include files are nearby. additional_includedir= case "$found_dir" in - */lib | */lib/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'` + */$acl_libdirstem | */$acl_libdirstem/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` + if test "$name" = '$1'; then + LIB[]NAME[]_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + */$acl_libdirstem2 | */$acl_libdirstem2/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` + if test "$name" = '$1'; then + LIB[]NAME[]_PREFIX="$basedir" + fi additional_includedir="$basedir/include" ;; esac @@ -396,9 +522,11 @@ dnl 3. if it's already present in $LDFLAGS or the already dnl constructed $LIBNAME, dnl 4. if it doesn't exist as a directory. - if test "X$additional_libdir" != "X/usr/lib"; then + if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ + && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then haveit= - if test "X$additional_libdir" = "X/usr/local/lib"; then + if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ + || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; @@ -497,18 +625,18 @@ done done if test "X$rpathdirs" != "X"; then - if test -n "$hardcode_libdir_separator"; then + if test -n "$acl_hardcode_libdir_separator"; then dnl Weird platform: only the last -rpath option counts, the user must dnl pass all path elements in one option. We can arrange that for a dnl single library, but not when more than one $LIBNAMEs are used. alldirs= for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" + alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" done - dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl. + dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl. acl_save_libdir="$libdir" libdir="$alldirs" - eval flag=\"$hardcode_libdir_flag_spec\" + eval flag=\"$acl_hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" else @@ -516,7 +644,7 @@ for found_dir in $rpathdirs; do acl_save_libdir="$libdir" libdir="$found_dir" - eval flag=\"$hardcode_libdir_flag_spec\" + eval flag=\"$acl_hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" done @@ -529,6 +657,11 @@ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" done fi + popdef([P_A_C_K]) + popdef([PACKLIBS]) + popdef([PACKUP]) + popdef([PACK]) + popdef([NAME]) ]) dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, @@ -551,3 +684,82 @@ fi done ]) + +dnl For those cases where a variable contains several -L and -l options +dnl referring to unknown libraries and directories, this macro determines the +dnl necessary additional linker options for the runtime path. +dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL]) +dnl sets LDADDVAR to linker options needed together with LIBSVALUE. +dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed, +dnl otherwise linking without libtool is assumed. +AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS], +[ + AC_REQUIRE([AC_LIB_RPATH]) + AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) + $1= + if test "$enable_rpath" != no; then + if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then + dnl Use an explicit option to hardcode directories into the resulting + dnl binary. + rpathdirs= + next= + for opt in $2; do + if test -n "$next"; then + dir="$next" + dnl No need to hardcode the standard /usr/lib. + if test "X$dir" != "X/usr/$acl_libdirstem" \ + && test "X$dir" != "X/usr/$acl_libdirstem2"; then + rpathdirs="$rpathdirs $dir" + fi + next= + else + case $opt in + -L) next=yes ;; + -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'` + dnl No need to hardcode the standard /usr/lib. + if test "X$dir" != "X/usr/$acl_libdirstem" \ + && test "X$dir" != "X/usr/$acl_libdirstem2"; then + rpathdirs="$rpathdirs $dir" + fi + next= ;; + *) next= ;; + esac + fi + done + if test "X$rpathdirs" != "X"; then + if test -n ""$3""; then + dnl libtool is used for linking. Use -R options. + for dir in $rpathdirs; do + $1="${$1}${$1:+ }-R$dir" + done + else + dnl The linker is used for linking directly. + if test -n "$acl_hardcode_libdir_separator"; then + dnl Weird platform: only the last -rpath option counts, the user + dnl must pass all path elements in one option. + alldirs= + for dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir" + done + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + $1="$flag" + else + dnl The -rpath options are cumulative. + for dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$dir" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + $1="${$1}${$1:+ }$flag" + done + fi + fi + fi + fi + fi + AC_SUBST([$1]) +]) + --- ppl-0.10.2.orig/m4/lib-prefix.m4 +++ ppl-0.10.2/m4/lib-prefix.m4 @@ -1,5 +1,5 @@ -# lib-prefix.m4 serial 4 (gettext-0.14.2) -dnl Copyright (C) 2001-2005 Free Software Foundation, Inc. +# lib-prefix.m4 serial 7 (gettext-0.18) +dnl Copyright (C) 2001-2005, 2008-2009 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. @@ -24,6 +24,7 @@ AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) AC_REQUIRE([AC_PROG_CC]) AC_REQUIRE([AC_CANONICAL_HOST]) + AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) dnl By default, look in $includedir and $libdir. use_additional=yes @@ -45,7 +46,7 @@ ]) else additional_includedir="$withval/include" - additional_libdir="$withval/lib" + additional_libdir="$withval/$acl_libdirstem" fi fi ]) @@ -87,7 +88,7 @@ dnl 2. if it's already present in $LDFLAGS, dnl 3. if it's /usr/local/lib and we are using GCC on Linux, dnl 4. if it doesn't exist as a directory. - if test "X$additional_libdir" != "X/usr/lib"; then + if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then haveit= for x in $LDFLAGS; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) @@ -97,7 +98,7 @@ fi done if test -z "$haveit"; then - if test "X$additional_libdir" = "X/usr/local/lib"; then + if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then if test -n "$GCC"; then case $host_os in linux*) haveit=yes;; @@ -151,3 +152,74 @@ exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" ]) + +dnl AC_LIB_PREPARE_MULTILIB creates +dnl - a variable acl_libdirstem, containing the basename of the libdir, either +dnl "lib" or "lib64" or "lib/64", +dnl - a variable acl_libdirstem2, as a secondary possible value for +dnl acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or +dnl "lib/amd64". +AC_DEFUN([AC_LIB_PREPARE_MULTILIB], +[ + dnl There is no formal standard regarding lib and lib64. + dnl On glibc systems, the current practice is that on a system supporting + dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under + dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine + dnl the compiler's default mode by looking at the compiler's library search + dnl path. If at least one of its elements ends in /lib64 or points to a + dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI. + dnl Otherwise we use the default, namely "lib". + dnl On Solaris systems, the current practice is that on a system supporting + dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under + dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or + dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib. + AC_REQUIRE([AC_CANONICAL_HOST]) + acl_libdirstem=lib + acl_libdirstem2= + case "$host_os" in + solaris*) + dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment + dnl . + dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link." + dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the + dnl symlink is missing, so we set acl_libdirstem2 too. + AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit], + [AC_EGREP_CPP([sixtyfour bits], [ +#ifdef _LP64 +sixtyfour bits +#endif + ], [gl_cv_solaris_64bit=yes], [gl_cv_solaris_64bit=no]) + ]) + if test $gl_cv_solaris_64bit = yes; then + acl_libdirstem=lib/64 + case "$host_cpu" in + sparc*) acl_libdirstem2=lib/sparcv9 ;; + i*86 | x86_64) acl_libdirstem2=lib/amd64 ;; + esac + fi + ;; + *) + searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` + if test -n "$searchpath"; then + acl_save_IFS="${IFS= }"; IFS=":" + for searchdir in $searchpath; do + if test -d "$searchdir"; then + case "$searchdir" in + */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; + */../ | */.. ) + # Better ignore directories of this form. They are misleading. + ;; + *) searchdir=`cd "$searchdir" && pwd` + case "$searchdir" in + */lib64 ) acl_libdirstem=lib64 ;; + esac ;; + esac + fi + done + IFS="$acl_save_IFS" + fi + ;; + esac + test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" +]) +