From 901dd0aa06f49ecc5d2ad84a16bf08936625e5d1 Mon Sep 17 00:00:00 2001
From: Chris Gianelloni <wolf31o2@wolf31o2.org>
Date: Mon, 21 Sep 2009 15:50:11 -0700
Subject: Importing my customized version of mkxf86config (version 0.9.10) for
 tracking changes.

---
 ChangeLog          |   7 +-
 mkxf86config.sh    | 290 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 xorg.conf.impact   | 101 +++++++++++++++++++
 xorg.conf.in       | 204 +++++++++++++++++++++++++++++++++++++
 xorg.conf.newport  | 132 ++++++++++++++++++++++++
 xorg.conf.o2-fbdev |  69 +++++++++++++
 6 files changed, 802 insertions(+), 1 deletion(-)
 create mode 100644 mkxf86config.sh
 create mode 100644 xorg.conf.impact
 create mode 100644 xorg.conf.in
 create mode 100644 xorg.conf.newport
 create mode 100644 xorg.conf.o2-fbdev

diff --git a/ChangeLog b/ChangeLog
index dc31821..61eada9 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,5 +1,10 @@
 # ChangeLog for mkxf86config
-# Copyright 1999-2008 Gentoo Foundation; 2009-2009 Various authors (see AUTHORS)
+# Copyright 1999-2009 Gentoo Foundation; 2009-2009 Various authors (see AUTHORS)
 # Distributed under the GPL v2
 # $Id$
 
+  21 Sep 2009; Chris Gianelloni <wolf31o2@wolf31o2.org> +mkxf86config.sh,
+  +xorg.conf.impact, +xorg.conf.in, +xorg.conf.newport, +xorg.conf.o2-fbdev:
+  Importing my customized version of mkxf86config (version 0.9.10) for
+  tracking changes.
+
diff --git a/mkxf86config.sh b/mkxf86config.sh
new file mode 100644
index 0000000..9d6c528
--- /dev/null
+++ b/mkxf86config.sh
@@ -0,0 +1,290 @@
+#!/bin/bash
+
+source /etc/profile
+source /sbin/functions.sh
+
+# First, get the command line
+CMDLINE="$(</proc/cmdline)"
+
+# Most of this if for MIPS, except for the last one, which is for everything 
+# else to select a default resolution.  Since the MIPS configs are ready to be
+# used by default, we exit after calling a MIPS config.
+for x in ${CMDLINE}
+do
+	case "${x}" in
+		ip22)
+			# Newport for now, IP22 Impact later
+			if [ ! -z "$(grep 'SGI Indigo2' /proc/cpuinfo)" ]
+			then
+				sed -e '/^#@@@/s:\(^#@@@\|@@@$\)::g' \
+					/etc/X11/xorg.conf.newport > /etc/X11/xorg.conf
+			fi
+			exit 0
+		;;
+		ip28)
+			# This might support Newport too, but I2 Newport boards are rare.
+			cp -f /etc/X11/xorg.conf.impact /etc/X11/xorg.conf
+			exit 0
+		;;
+
+		ip30)
+			# Figure out if we're Impact, or VPro (Odyssey)
+			if [ -e "/proc/fb" ]; then
+				ip30_impact="$(grep -i 'impact' /proc/fb)"
+				ip30_odyssey="$(grep -i 'odyssey' /proc/fb)"
+				if [ -n "${ip30_impact}" ]
+				then
+					cp -f /etc/X11/xorg.conf.impact /etc/X11/xorg.conf
+				elif [ -n "${ip30_odyssey}" ]
+				then
+					# Do nothing for now -- maybe one day we'll get an X driver
+					# cp -f /etc/X11/xorg.conf.odyssey /etc/X11/xorg.conf
+					ewarn "Currently, there is no X driver for Odyssey"
+				fi
+			fi
+			exit 0
+		;;
+		ip32)
+			# We use fbdev for now -- maybe one day we'll get a gbefb X driver
+			cp -f /etc/X11/xorg.conf.o2-fbdev /etc/X11/xorg.conf
+			exit 0
+		;;
+		xres\=*)
+			# We got a resolution on the command line, use it.
+			NEWMODE=$(echo ${x} | cut -d= -f2)
+			RAWMODES="\"${NEWMODE}\""
+	esac
+done
+
+TMPFILE="/tmp/mkxf86config-$$"
+MONITORTMP="${TMPFILE}-monitor"
+
+rm -f "${TMPFILE}" "${MONITORTMP}"
+
+# Read in what hwsetup has found for X
+[ -f /etc/sysconfig/xserver ] && . /etc/sysconfig/xserver
+
+WHEEL='s|"PS/2"|"auto"\
+Option          "ZAxisMapping"          "4 5"|g;'
+
+# Read in changes
+[ -f /etc/sysconfig/gentoo ] && . /etc/sysconfig/gentoo
+
+# Read default keyboard from config file.
+# There seems to be no reliable autoprobe possible.
+[ -f /etc/sysconfig/keyboard ] && . /etc/sysconfig/keyboard
+
+# Create mouse link and insert a mouse default type into xorg.conf
+# if not already done by hwsetup
+[ -f /etc/sysconfig/mouse ] && . /etc/sysconfig/mouse
+# We create this link since hwsetup cannot properly detect serial mice
+[ -e /dev/mouse ] || ln -sf /dev/ttyS0 /dev/mouse
+
+PROTO="${XMOUSETYPE:-Microsoft}"
+NOEMU=""
+[ "${XEMU3}" = "no" ] && NOEMU='s|^.*Emulate3|# No 2 -> 3 Button emulation|g'
+
+DEADKEYS=""
+[ "${XKEYBOARD}" = "de" ] || DEADKEYS='s|^.*nodeadkeys.*$||g;'
+
+if [ -n "${XMODULE}" ]
+then
+	# Check for Framebuffer X-Modules and initialize framebuffer module
+	case "${XMODULE}" in
+		pvr2fb)
+			modprobe "${XMODULE}" >/dev/null 2>&1
+			XMODULE="fbdev"
+		;;
+	esac
+fi
+
+# We used to use ddcxinfo-knoppix for monitor information, now we will just let
+# X choose for itself.  This will probably break older machines.
+# You can uncomment the following to re-enable dccxinfo-knoppix, but this only
+# works on x86.
+#MONITOR="$(ddcxinfo-knoppix -monitor)"
+# Here we are setting a default set of HorizSync and VertRefresh.  These are
+# "safe" values.  I am hoping to remove this completely in the future once more
+# testing has been done on alternate architectures.
+MONITOR='Section "Monitor"
+	Identifier   "Monitor0"
+	HorizSync    28.0 - 96.0
+	VertRefresh  50.0 - 75.0
+EndSection'
+RC="$?"
+COMPLETE="$(awk '/EndSection/{print}' <<EOF
+${MONITOR}
+EOF
+)"
+
+# Extract values for display
+MODEL="$(awk '/^[	 ]*ModelName/{print;exit}'<<EOF
+${MONITOR}
+EOF
+)"
+
+MODEL="${MODEL#*\"}"
+MODEL="${MODEL%\"*}"
+
+HREFRESH="$(awk '/^[	 ]*HorizSync/{print $2 $3 $4; exit}'<<EOF
+${MONITOR}
+EOF
+)"
+
+VREFRESH="$(awk '/^[	 ]*VertRefresh/{print $2 $3 $4; exit}'<<EOF
+${MONITOR}
+EOF
+)"
+
+# Build line of allowed modes
+# This is created from the Modelines created by ddcxinfo-knoppix and is not
+# always accurate for your monitor.  This is currently set statically to give
+# working support for alpha/amd64/ppc/x86 for the 2007.0 Gentoo release.  If
+# anyone has more reliable, cross-platform methods, I'm all ears.
+#RAWMODES=$(ddcxinfo-knoppix -monitor | grep ModeLine | sed -r "s/.*\"([0-9]+x[0-9]+)\".*/\1/g"| sort -rg | uniq | xargs echo | sed -r "s/([0-9]+x[0-9]+)/\"\1\"/g")
+[ -z "${RAWMODES}" ] && RAWMODES="\"1024x768\" \"800x600\" \"640x480\""
+MODES="Modes ${RAWMODES}"
+
+# We need to check this because serial mice have long timeouts
+SERIALMOUSE="$(ls -l1 /dev/mouse* 2>/dev/null | awk '/ttyS/{print $NF ; exit 0}')"
+if [ -n "${SERIALMOUSE}" ]
+then
+	SERIALMOUSE="s|/dev/ttyS0|${SERIALMOUSE}|g;"
+else
+	SERIALMOUSE='s|^.*InputDevice.*"Serial Mouse".*$|# Serial Mouse not detected|g;'
+fi
+
+# PS/2 bug: Some keyboards are incorrectly used as mice in XFree. :-(
+PSMOUSE="$(ls -l1 /dev/mouse* 2>/dev/null | awk '/input/{print $NF ; exit 0}')"
+if [ -n "${PSMOUSE}" ]
+then
+	PSMOUSE=""
+else
+	PSMOUSE='s|^.*InputDevice.*"PS/2 Mouse".*$|# PS/2 Mouse not detected|g;'
+fi
+
+case "$(cat /proc/modules)" in
+	*usbmouse*|*mousedev*|*hid\ *)
+		USBMOUSE=""
+	;;
+	*)
+		USBMOUSE='s|^.*InputDevice.*"USB Mouse".*$|# USB Mouse not detected|g;'
+	;;
+esac
+
+# Kernel 2.6 reports psaux via /dev/input/mice like USB
+case "$(uname -r)" in
+	2.6.*)
+		if [ -n "${PSMOUSE}" ]
+		then
+			PSMOUSE='s|^.*InputDevice.*"PS/2 Mouse".*$|# PS/2 Mouse using /dev/input/mice in Kernel 2.6|g;'
+			USBMOUSE=""
+		fi
+	;;
+esac
+
+if [ -a /proc/bus/input/devices ]
+then
+	CHECK=$(cat /proc/bus/input/devices | grep -i synaptics | wc -l)
+	if [ ${CHECK} -gt 0 ]
+	then
+		modprobe -q evdev
+		SYNDEV=/dev/input/$(cat /proc/bus/input/devices | egrep -i -A 5 "^N: .*synaptics.*" | grep Handlers | sed -r "s/.*(event[0-9]+).*/\1/g")
+		SYNMOUSE=""
+	else
+		SYNMOUSE='s|^.*InputDevice.*"Synaptics".*$|#No Synaptics touchpad found|g;'
+	fi
+fi
+
+# Write Monitor data now
+rm -f "${MONITORTMP}"
+echo "${MONITOR}" > "${MONITORTMP}"
+
+# VMWare special handling
+VMWARE=""
+MOUSEDRIVER=""
+if [ "${XMODULE}" = "vmware" ]
+then
+	VMWARE='s|^.*BusID.*PCI.*$|BusID "PCI:0:15:0"|g;'
+	DEPTH='s|DefaultColorDepth |# DefaultColorDepth |g;'
+	if [ -e /usr/lib/xorg/modules/input/vmmouse_drv.so ] || \
+	[ -e /usr/lib/modules/input/vmmouse_drv.so ]
+	then
+		MOUSEDRIVER='s|^.*Driver.*"mouse".*$|\tDriver\t"vmmouse"|g;'
+	fi
+fi
+
+#VirtualPC special handline
+VPC=""
+if [ "${XMODULE}" = "s3" ]
+then
+	VPC='s|^.*BusID.*PCI.*$|BusID "PCI:0:8:0"|g;'
+	DEPTH='s|DefaultColorDepth 24|DefaultColorDepth 16|g;'
+fi
+
+# If we don't have a XMODULE set, use fbdev as fall-back
+[ -z "${XMODULE}" ] && XMODULE="fbdev"
+
+# Do NOT use a default colordepth setting if we are using the "fbdev" module
+if [ "${XMODULE}" = "fbdev" ]
+then
+	DEPTH='s|DefaultColorDepth |# DefaultColorDepth |g;'
+fi
+
+# These drivers need the sw_cursor option
+SWCURSOR=""
+MONITORLAYOUT=""
+case "${XMODULE}" in
+	ati|nv|trident)
+		SWCURSOR='s|^.*#Option.*"sw_cursor".*$|Option "sw_cursor"|g;'
+	;;
+	radeon)
+		SWCURSOR='s|^.*#Option.*"sw_cursor".*$|Option "sw_cursor"|g;'
+		MONITORLAYOUT='s|^.*#Option.*"MonitorLayout".*$|Option "MonitorLayout"|g;'
+	;;
+esac
+
+# We must use NoPM, because some machines freeze if Power management is beingi
+# activated.
+NOPM=""
+DPMS=""
+
+#checkbootparam noapm && NOPM='Option	"NoPM"	"true"' || DPMS='Option	"DPMS"	"true"'
+
+sed -e 's|@@PROTOCOL@@|'"${PROTO}"'|g;'"${NOEMU}" \
+    -e '/@@MONITOR@@/r '"${MONITORTMP}" \
+    -e 's|@@MONITOR@@||g' \
+    -e 's|@@NOPM@@|'"${NOPM}"'|g' \
+    -e 's|@@XMODULE@@|'"${XMODULE}"'|g;'"${VMWARE}""${VPC}""${SERIALMOUSE}""${USBMOUSE}""${PSMOUSE}""${SWCURSOR}""${MONITORLAYOUT}""${WHEEL}""${SYNMOUSE}""${MOUSEDRIVER}" \
+    -e 's|@@SYNDEV@@|'"${SYNDEV}"'|g' \
+    -e 's|@@MODES@@|'"${MODES}"'|g;'"${DEPTH}" \
+    -e 's|"XkbLayout" *"[^"]*"|"XkbLayout" "'"${XKEYBOARD}"'"|g;'"${DEADKEYS}" \
+    /etc/X11/xorg.conf.in >/etc/X11/xorg.conf
+
+if [ -n "${DPMS}" ]
+then
+    if [ -f /etc/X11/xorg.conf ]
+	then
+        sed -e 's|Identifier[    ]*"Monitor0"|Identifier        "Monitor0"\
+	'"${DPMS}"'|g' /etc/X11/xorg.conf >/etc/X11/xorg.conf.new
+		mv -f /etc/X11/xorg.conf.new /etc/X11/xorg.conf
+    fi
+fi
+
+rm -f "${TMPFILE}" "${MONITORTMP}" 2>/dev/null
+
+# Print info about selected X-Server
+[ -n "${XDESC}" ] || XDESC="(yet) unknown card"
+echo -n " ${GOOD}Video is"
+
+[ -n "${XDESC}" ] && echo -n " ${HILITE}${XDESC}${NORMAL},"
+echo -n " using ${GOOD}${XSERVER:-generic VESA}"
+[ -n "${XMODULE}" ] && echo -n "(${HILITE}${XMODULE}${NORMAL})"
+echo " Server${NORMAL}"
+
+echo -n " ${GOOD}Monitor is ${HILITE}${MODEL:-Generic Monitor}${NORMAL}"
+[ -n "${HREFRESH}" -a -n "${VREFRESH}" ] && echo "${GOOD}, ${GOOD}H:${HILITE}${HREFRESH}kHz${GOOD}, V:${HILITE}${VREFRESH}Hz${NORMAL}" || echo ""
+[ -n "${XVREFRESH}" ] && echo " ${GOOD}Trying specified vrefresh rate of ${HILITE}${XVREFRESH}Hz.${NORMAL}"
+
+[ -n "${MODES}" ] && echo " ${GOOD}Using Modes ${HILITE}${MODES##Modes }${NORMAL}"
+
diff --git a/xorg.conf.impact b/xorg.conf.impact
new file mode 100644
index 0000000..6f6ea3f
--- /dev/null
+++ b/xorg.conf.impact
@@ -0,0 +1,101 @@
+Section "Files"
+
+    FontPath	"/usr/share/fonts/local/"
+    FontPath	"/usr/share/fonts/misc/"
+    FontPath	"/usr/share/fonts/75dpi/:unscaled"
+    FontPath	"/usr/share/fonts/100dpi/:unscaled"
+    FontPath	"/usr/share/fonts/Type1/"
+    FontPath	"/usr/share/fonts/CID/"
+    FontPath	"/usr/share/fonts/Speedo/"
+    FontPath	"/usr/share/fonts/75dpi/"
+    FontPath	"/usr/share/fonts/100dpi/"
+
+EndSection
+
+Section "Module"
+
+    Load	"dbe"
+
+    SubSection	"extmod"
+	Option	"omit xfree86-dga"
+    EndSubSection
+
+    Load	"type1"
+    Load	"freetype"
+
+EndSection
+
+
+Section "ServerFlags"
+
+    Option	"DisableVidModeExtension"
+
+    Option	"blank time"	"10"	# 10 minutes
+
+    Option	"standby time"	"20"
+    Option	"suspend time"	"30"
+    Option	"off time"	"60"
+
+EndSection
+
+Section "InputDevice"
+
+	Identifier	"Keyboard1"
+	Driver	"keyboard"
+	Option	"CoreKeyboard"
+	Option	"XkbRules"  "xfree86"
+	Option	"XkbModel"  "pc104"
+	Option	"AutoRepeat"	"500 30"
+
+EndSection
+
+Section "InputDevice"
+
+	Identifier	"Mouse1"
+	Driver	"mouse"
+	Option	"CorePointer"
+	Option	"Protocol"	"ImPS/2"
+	Option	"Device"	"/dev/input/mice"
+	Option	"ZAxisMapping"	"4 5"
+
+EndSection
+
+Section "Monitor"
+
+	Identifier	"Monitor1"
+	DisplaySize  340        270
+	#DisplaySize  380        310
+	HorizSync	30.0 - 82.0  # multiple ranges of sync frequencies
+	VertRefresh	50.0 - 75.0  # typical for a single frequency fixed-sync monitor
+	#ModeLine "1280x1024@70Hz" 130  1280 1320 1480 1728  1024 1029 1036 1077    
+
+EndSection
+
+Section "Device"
+    Identifier	"Impact1"
+    Driver	"impact"
+    Option	"Depth"	"24"
+EndSection
+
+Section "Screen"
+    Identifier	"Screen1"
+    Device	"Impact1"
+    Monitor	"Monitor1"
+    DefaultDepth 24
+    SubSection "Display"
+		Depth		8
+		Modes		"1280x1024"
+    EndSubSection
+    SubSection "Display"
+		Depth		24
+		Modes		"1280x1024"
+    EndSubSection
+EndSection
+
+Section "ServerLayout"
+	Identifier	"Layout1"
+	Screen		"Screen1"
+	InputDevice	"Mouse1"	"CorePointer"
+	InputDevice	"Keyboard1"	"CoreKeyboard"
+EndSection
+
diff --git a/xorg.conf.in b/xorg.conf.in
new file mode 100644
index 0000000..a2b25de
--- /dev/null
+++ b/xorg.conf.in
@@ -0,0 +1,204 @@
+Section "ServerLayout"
+	Identifier	"X.Org Configured"
+	Screen	0	"Screen0" 0 0
+	InputDevice	"Keyboard0" "CoreKeyboard"
+	InputDevice	"PS/2 Mouse" "AlwaysCore"
+#	InputDevice	"Serial Mouse" "AlwaysCore"
+	InputDevice	"USB Mouse" "AlwaysCore"
+	InputDevice	"Synaptics" "AlwaysCore"
+EndSection
+
+Section "ServerFlags"
+	Option	"AllowMouseOpenFail" "true"
+	@@NOPM@@
+EndSection
+
+Section "Files"
+	FontPath	"/usr/share/fonts/util"
+	FontPath	"/usr/share/fonts/encodings"
+	FontPath	"/usr/share/fonts/misc"
+	FontPath	"/usr/share/fonts/local"
+	FontPath	"/usr/share/fonts/terminus"
+	FontPath	"/usr/share/fonts/corefonts"
+	FontPath	"/usr/local/share/fonts"
+	FontPath	"/usr/share/fonts/default"
+	FontPath	"/usr/share/fonts/TTF"
+	FontPath	"/usr/share/fonts/type1"
+	FontPath	"/usr/share/fonts/100dpi"
+	FontPath	"/usr/share/fonts/75dpi"
+	FontPath	"/usr/share/fonts/arphicfonts"
+	FontPath	"/usr/share/fonts/jisx0213"
+	FontPath	"/usr/share/fonts/shinonome"
+	FontPath	"/usr/share/fonts/baekmuk-fonts"
+	FontPath	"/usr/share/fonts/kacst-fonts"
+	FontPath	"/usr/share/fonts/sgi-fonts"
+	FontPath	"/usr/share/fonts/unfonts"
+	FontPath	"/usr/share/fonts/default/ghostscript"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-100dpi:unscaled"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-75dpi:unscaled"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-misc:unscaled"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-100dpi"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-75dpi"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-misc"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-cp1251-100dpi:unscaled"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-cp1251-75dpi:unscaled"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-cp1251-misc:unscaled"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-cp1251-100dpi"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-cp1251-75dpi"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-cp1251-misc"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-isocyr-100dpi:unscaled"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-isocyr-75dpi:unscaled"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-isocyr-misc:unscaled"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-isocyr-100dpi"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-isocyr-75dpi"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-isocyr-misc"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-koi8r-100dpi:unscaled"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-koi8r-75dpi:unscaled"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-koi8r-misc:unscaled"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-koi8r-100dpi"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-koi8r-75dpi"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-koi8r-misc"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-koi8u-100dpi:unscaled"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-koi8u-75dpi:unscaled"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-koi8u-misc:unscaled"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-koi8u-100dpi"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-koi8u-75dpi"
+	FontPath	"/usr/share/fonts/xfonts-cronyx-koi8u-misc"
+EndSection
+
+Section "Module"
+	Load	"ddc"
+	Load	"vbe"
+	Load	"GLcore"
+	Load	"dbe"
+	Load	"dri"
+	Load	"extmod"
+	Load	"glx"
+	Load	"bitmap"
+	Load	"type1"
+	Load	"freetype"
+	Load	"record"
+EndSection
+
+Section "InputDevice"
+	Identifier	"Keyboard0"
+	Driver	"kbd"
+	Option	"CoreKeyboard"
+	Option	"XkbRules" "xorg"
+	Option	"XkbModel" "pc105"
+#	Option	"XkbOptions" "grp:toggle,grp_led:scroll"
+	Option	"XkbVariant" ",winkeys"
+	Option	"XkbLayout" ""
+EndSection
+
+Section "InputDevice"
+	Identifier	"Serial Mouse"
+	Driver	"mouse"
+	Option	"Protocol" "Microsoft"
+	Option	"Device" "/dev/ttyS0"
+	Option	"Emulate3Buttons" "true"
+	Option	"Emulate3Timeout" "70"
+	Option	"SendCoreEvents"  "true"
+EndSection
+
+Section "InputDevice"
+	Identifier	"PS/2 Mouse"
+	Driver	"mouse"
+	Option	"Protocol" "IMPS/2"
+	Option	"Device" "/dev/misc/psaux"
+	Option	"Emulate3Buttons" "true"
+	Option	"Emulate3Timeout" "70"
+	Option	"SendCoreEvents"  "true"
+	Option	"ZAxisMapping" "4 5"
+EndSection
+
+Section "InputDevice"
+	Identifier	"USB Mouse"
+	Driver	"mouse"
+	Option	"Device" "/dev/input/mice"
+	Option	"SendCoreEvents" "true"
+	Option	"Protocol" "IMPS/2"
+	Option	"ZAxisMapping" "4 5"
+	Option	"Buttons" "5"
+EndSection
+
+Section "InputDevice"
+	Identifier	"Synaptics"
+	Driver	"synaptics"
+	Option	"Protocol" "event"
+	Option	"Device" "@@SYNDEV@@"
+	Option	"LeftEdge" "1900"
+	Option	"RightEdge" "5400"
+	Option	"TopEdge" "1900"
+	Option	"BottomEdge" "4000"
+	Option	"FingerLow" "25"
+	Option	"FingerHigh" "30"
+	Option	"MaxTapTime" "180"
+	Option	"MaxTapMove" "220"
+	Option	"VertScrollDelta" "100"
+	Option	"MinSpeed" "0.02"
+	Option	"MaxSpeed" "0.10"
+	Option	"AccelFactor" "0.0010"
+	Option	"SHMConfig" "on"
+EndSection
+
+# Auto-generated by mkxf86config
+@@MONITOR@@
+
+Section "Device"
+	### Available Driver options are:-
+	# sw_cursor is needed for some ati and radeon cards
+	#Option     "sw_cursor"
+	#Option     "hw_cursor"
+	#Option     "NoAccel"
+	#Option     "ShowCache"
+	#Option     "ShadowFB"
+	#Option     "UseFBDev"
+	#Option     "Rotate"
+	#Option     "MonitorLayout" "LVDS, NONE"
+	Identifier  "Card0"
+	# The following line is auto-generated by x11-misc/mkxf86config
+	Driver      "@@XMODULE@@"
+	VendorName  "All"
+	BoardName   "All"
+#	BusID       "PCI:1:0:0"
+EndSection
+
+Section "Screen"
+	Identifier	"Screen0"
+	Device	"Card0"
+	Monitor	"Monitor0"
+	DefaultColorDepth 24
+	SubSection "Display"
+		Depth	1
+		@@MODES@@
+	EndSubSection
+	SubSection "Display"
+		Depth	4
+		@@MODES@@
+	EndSubSection
+	SubSection "Display"
+		Depth	8
+		@@MODES@@
+	EndSubSection
+	SubSection "Display"
+		Depth	15
+		@@MODES@@
+	EndSubSection
+	SubSection "Display"
+		Depth	16
+		@@MODES@@
+	EndSubSection
+	SubSection "Display"
+		Depth	24
+		@@MODES@@
+	EndSubSection
+	SubSection "Display"
+		Depth	32
+		@@MODES@@
+	EndSubSection
+EndSection
+
+Section "DRI"
+	Mode 0666
+EndSection
diff --git a/xorg.conf.newport b/xorg.conf.newport
new file mode 100644
index 0000000..b4c8e4f
--- /dev/null
+++ b/xorg.conf.newport
@@ -0,0 +1,132 @@
+# ***************************************************************************
+# This is a configuration file for the Indy's / I2's Newport Graphics and the
+# SGI GDM17E10 Monitor other monitors should work as well
+# Guido Guenther <agx@sigxcpu.org>
+# ***************************************************************************
+
+Section "ServerFlags"
+	Option "BlankTime"  "10"
+EndSection
+
+Section "Files"
+	FontPath	"/usr/share/fonts/misc"
+	FontPath	"/usr/share/fonts/cyrillic"
+	FontPath	"/usr/share/fonts/100dpi/:unscaled"
+	FontPath	"/usr/share/fonts/75dpi/:unscaled"
+	FontPath	"/usr/share/fonts/TrueType"
+	FontPath	"/usr/share/fonts/Type1"
+	FontPath	"/usr/share/fonts/Speedo"
+EndSection
+
+Section "Module"
+	Load	"xaa"
+	Load	"GLcore"
+	Load	"bitmap"
+	Load	"dbe"
+	Load	"ddc"
+	Load	"dri"
+	Load	"extmod"
+	Load	"freetype"
+	Load	"glx"
+	Load	"int10"
+	Load	"pex5"
+	Load	"record"
+	Load	"speedo"
+	Load	"type1"
+	Load	"vbe"
+	Load	"xie"
+EndSection
+
+Section "InputDevice"
+	Identifier	"Generic Keyboard"
+	Driver		"kbd"
+	Option		"CoreKeyboard"
+
+	Option		"XkbModel"	"pc102"
+	Option		"XkbLayout"	"us"
+# for a german layout use:
+#    Option	"XkbLayout"	"de"
+#    Option	"XkbVariant"	"nodeadkeys"
+# if you don't like caps lock:
+#    Option	"XkbOptions"	"ctrl:swapcaps"
+    Option	"XkbOptions"	"ctrl:nocaps"
+EndSection
+
+Section "InputDevice"
+	Identifier	"Generic Mouse"
+	Driver		"mouse"
+	Option		"CorePointer"
+# use /dev/psaus if you don't run gpm
+	Option		"Device"		"/dev/psaux"
+	Option		"Protocol"		"ImPS/2"
+	Option		"ZAxisMapping"		"4 5"
+EndSection
+
+Section "Device"
+	Identifier	"SGI Newport"
+	Driver		"newport"
+# I2 XL users need this one:
+#@@@	Option		"BusID" "1"@@@
+# Use this to disable the hardware cursor
+#	Option		"HWCursor"	"false"
+# Use this if autodetection of bitplanes fails:
+#    	Option		"bitplanes" "24"
+	Option		"NoAccel"	"false"
+EndSection
+
+Section "Monitor"
+    	Identifier	"SUN GDM17e10"
+
+# This Information can be found at http://www.si87.com/
+    HorizSync	30-82  # multiple ranges of sync frequencies
+    VertRefresh	50-120  # typical for a single frequency fixed-sync monitor
+
+# A single modeline is sufficient, we don't use it at all, but it might be
+# handy if you connect this monitor to a PC:
+#    ModeLine "1280x1024@70Hz" 130  1280 1320 1480 1728  1024 1029 1036 1077    
+     Modeline "1280x1024@70" 141.82 1280 1312 1848 1880 1024 1044 1056 1076
+EndSection
+
+Section "Screen"
+	Identifier	"Default Screen"
+	Device		"SGI Newport"
+	Monitor		"SUN GDM17e10"
+	DefaultDepth	24
+# use this for 24bpp mode
+#	DefaultDepth	24
+	SubSection "Display"
+		Depth		1
+		Modes		"1280x1024"
+	EndSubSection
+	SubSection "Display"
+		Depth		4
+		Modes		"1280x1024"
+	EndSubSection
+	SubSection "Display"
+		Depth		8
+		Modes		"1280x1024"
+	EndSubSection
+	SubSection "Display"
+		Depth		15
+		Modes		"1280x1024"
+	EndSubSection
+	SubSection "Display"
+		Depth		16
+		Modes		"1280x1024"
+	EndSubSection
+	SubSection "Display"
+		Depth		24
+		Modes		"1280x1024"
+	EndSubSection
+EndSection
+
+Section "ServerLayout"
+	Identifier	"Default Layout"
+	Screen		"Default Screen"
+	InputDevice	"Generic Keyboard"
+	InputDevice	"Generic Mouse"
+EndSection
+
+Section "DRI"
+	Mode	0666
+EndSection
diff --git a/xorg.conf.o2-fbdev b/xorg.conf.o2-fbdev
new file mode 100644
index 0000000..340908e
--- /dev/null
+++ b/xorg.conf.o2-fbdev
@@ -0,0 +1,69 @@
+Section "Files"
+	FontPath	"/usr/share/fonts/misc"
+	FontPath	"/usr/share/fonts/cyrillic"
+	FontPath	"/usr/share/fonts/100dpi/:unscaled"
+	FontPath	"/usr/share/fonts/75dpi/:unscaled"
+	FontPath	"/usr/share/fonts/TrueType"
+	FontPath	"/usr/share/fonts/Type1"
+	FontPath	"/usr/share/fonts/Speedo"
+EndSection
+
+Section "Module"
+EndSection
+
+Section "InputDevice"
+	Identifier	"Generic Keyboard"
+	Driver		"kbd"
+	Option		"CoreKeyboard"
+EndSection
+
+Section "InputDevice"
+	Identifier	"Mouse1"
+	Driver		"mouse"
+	Option		"CorePointer"
+	Option		"Device"		"/dev/input/mice"
+	Option		"Protocol"		"ImPS/2"
+	Option		"ZAxisMapping"		"4 5"
+EndSection
+
+#to connect a mouse on a serial port...
+#Section "InputDevice"
+#    Identifier "Mouse2"
+#    Driver "mouse"
+#    Option "Device" "/dev/ttyS1"
+#    Option "Protocol" "Auto"
+#EndSection
+
+
+Section "Device"
+	Identifier	"SGIdevice" 
+	Driver		"fbdev"
+EndSection
+
+Section "Monitor"
+    	Identifier	"SGImonitor"
+        HorizSync   31-65
+        VertRefresh 55-100
+EndSection
+
+Section "Screen"
+	Identifier	"Default Screen"
+	Device		"SGIdevice"
+	Monitor		"SGImonitor"
+	DefaultDepth 15
+	SubSection "Display"
+		Depth		15
+	EndSubSection
+EndSection
+
+Section "ServerLayout"
+	Identifier	"Default Layout"
+	Screen		"Default Screen"
+	InputDevice	"Generic Keyboard"
+        InputDevice "Mouse1" "CorePointer"
+        #InputDevice "Mouse2" "SendCoreEvents" # for the serial mouse
+EndSection
+
+Section "DRI"
+	Mode	0666
+EndSection
-- 
cgit v1.2.3-65-gdbad