cleanup

11 files changed, 0 insertions, 2122 deletions

diff --git a/media-libs/netpbm/Manifest b/media-libs/netpbm/Manifest
index adaf037fae9c..0a9ba9c7984d 100644
--- a/media-libs/netpbm/Manifest
+++ b/media-libs/netpbm/Manifest
@@ -1,16 +1,12 @@
 MD5 271b30a1e9c9711fb70d1ce37ee779a5 ChangeLog 5096
 MD5 a3fa57a31d2fddabce1df3b0b1a06137 netpbm-9.12-r4.ebuild 1509
-MD5 039ef6706946de35a7333e2b03a187e9 netpbm-10.11.10-r1.ebuild 1655
 MD5 f29a4d5b5c77123ae1f6532da09b5964 netpbm-10.11.5-r3.ebuild 1653
 MD5 944a8d3c699edb2d993c2450268f5f52 netpbm-10.11.13-r1.ebuild 1661
 MD5 764ce281b9633cf801ae408936a9d77a netpbm-10.11.14.ebuild 1661
 MD5 b38412609f4a8671a787d303b8d2b876 files/digest-netpbm-9.12-r4 61
-MD5 64b026ccda6561449981438f551614e5 files/digest-netpbm-10.11.10-r1 65
 MD5 19ce2b4d396523dcbcb1e415d4bdb8c9 files/digest-netpbm-10.11.5-r3 64
 MD5 dd594aafc07831b44b9e2e9734db508e files/digest-netpbm-10.11.13-r1 65
 MD5 6735fc271948c349d02f59361b4c373e files/digest-netpbm-10.11.14 65
-MD5 d3afaf9141525a706f8c077f66918670 files/10.11.10/Makefile.config 17308
-MD5 be5dafab017b8247e09f643e9798441e files/10.11.10/Makefile.svga 17374
 MD5 d3afaf9141525a706f8c077f66918670 files/10.11.13/Makefile.config 17308
 MD5 be5dafab017b8247e09f643e9798441e files/10.11.13/Makefile.svga 17374
 MD5 d3afaf9141525a706f8c077f66918670 files/10.11.5/Makefile.config 17308
diff --git a/media-libs/netpbm/files/10.11.10/Makefile.config b/media-libs/netpbm/files/10.11.10/Makefile.config
deleted file mode 100644
index 37e0b7a9bea6..000000000000
--- a/media-libs/netpbm/files/10.11.10/Makefile.config
+++ /dev/null
@@ -1,476 +0,0 @@
-####This file was automatically created by 'configure.'
-####Many variables are set twice -- a generic setting, then 
-####a system-specific override at the bottom of the file.
-####
-# This is a make file inclusion, to be included in all the Netpbm make
-# files.
-
-# This file is meant to contain variable settings that customize the
-# build for a particular target system configuration.
-
-# The distribution contains the file Makefile.config.in.  You edit
-# Makefile.config.in in ways relevant to your particular environment 
-# to create Makefile.config.  The "configure" program will do this
-# for you in simple cases.
-
-# Some of the variables that the including make file must set for this
-# file to work:
-#
-#  SRCDIR: The directory at the top of the Netpbm source tree.  Note that
-#  this is typically a relative directory, and it must be relative to the
-#  make file that includes this file.  So it's normally "..".
-
-DEFAULT_TARGET = nonmerge
-#DEFAULT_TARGET = merge
-
-# Fiasco has some special requirements that make it fail to compile on
-# some systems, and since it isn't very important, just set this to "N"
-# and skip it on those systems unless you want to debug it and fix it.
-# OpenBSD:
-#BUILD_FIASCO = N
-BUILD_FIASCO = Y
-
-# The following are commands for the build process to use.  These values
-# do not get built into anything.
-
-# The C compiler (including macro preprocessor)
-#CC = gcc
-# Note that 'cc' is usually an alias for whatever is the main compiler
-# on a system, e.g. the GNU Compiler on Linux.
-CC = cc
-
-# The linker.
-LD = $(CC)
-#LD = ld
-#Tru64:
-#LD = cc
-#LD = gcc 
-
-# CC and LD are for building the Netpbm programs, which are not necessarily
-# intended to run on the same system on which Make is running.  But when we 
-# build a build tool such as Libopt, it is meant to run only on the same 
-# system on which the Make is running.  The variables below define programs
-# to use to compile and link build tools.
-CC_FOR_BUILD = $(CC)
-LD_FOR_BUILD = $(LD)
-
-# MAKE is set automatically by Make to what was used to invoke Make.
-
-INSTALL = $(SRCDIR)/buildtools/install.sh
-#Solaris:
-#INSTALL = /usr/ucb/install
-#Tru64:
-#INSTALL = installbsd
-#OSF1:
-#INSTALL = $(SRCDIR)/buildtools/installosf
-#Red Hat Linux:
-#INSTALL = install
-
-# STRIPFLAG is the option you pass to the above install program to make it
-# strip unnecessary information out of binaries.
-STRIPFLAG = -s
-# If you don't want to strip the binaries, just leave it null:
-#STRIPFLAG = 
-
-SYMLINK = ln -s
-# At least some Windows environments don't have any concept of symbolic
-# links, but direct copies are usually a passable alternative.
-#SYMLINK = cp
-
-#MANPAGE_FORMAT is "nroff" or "cat".  It determines in what format the
-#pointer man pages are installed (ready to nroff, or ready to cat).  
-#A pointer man pages is just a single-paragraph pages that tells you there is
-#no man page for the program, to look at the HTML documentation instead.
-MANPAGE_FORMAT = nroff
-#MANPAGE_FORMAT = cat
-
-AR = ar
-RANLIB = ranlib
-# IRIX, SCO don't have Ranlib:
-#RANLIB = true
-LEX = flex
-# Solaris:
-# LEX = flex -e
-# Or just skip parts that need Lex:
-# LEX =
-
-# C compiler options 
-
-# gcc:
-# -ansi and -Werror should work too, but are not included
-# by default because there's no point in daring the build to fail.
-# -pedantic isn't a problem because it causes at worst a warning.
-#CFLAGS = -pedantic -O3 -Wall -Wno-uninitialized -Wmissing-declarations
-# The merged programs have a main_XXX subroutine instead of main(),
-# which would cause a warning with -Wmissing-declarations
-#CFLAGS_MERGE = -Wno-missing-declarations
-# On DEC Tru64 4.0F (at least), you need -DLONG_32 for ppmtompeg.
-#Tru64:
-#CFLAGS = -O2 -std1 -DLONG_32
-#AIX:
-#CFLAGS= -O3 -D_ALL_SOURCE
-#HP-UX:
-#CFLAGS= -O3 -fPIC
-
-
-# EXE is a suffix that the linker puts on any executable it generates.
-# In cygwin, this is .exe and most programs deal with its existence without
-# us having to know about it.  Some don't though, so set this:
-
-EXE =
-#Cygwin, DJGPP/Windows:
-#EXE = .exe
-  
-# linker options.  
-
-# On some systems you have to build into an executable the list of
-# directories where its dynamically linked libraries can be found at
-# run time.  This is typically done with a -R or --rpath linker
-# option.  Even on systems that don't require it, you might prefer to do
-# that rather than set up environment variables or configuration files
-# to tell the system where the libraries are.  A "Y" here means to put
-# the directory information in the executable at link time.
-
-NEED_RUNTIME_PATH = N
-# Solaris, SunOS, NetBSD:
-#NEED_RUNTIME_PATH = Y
-
-LDFLAGS =
-# Eunice users may want to use -noshare so that the executables can
-# run standalone:
-#LDFLAGS = -noshare
-#Tru64:
-# Russ Allberry says on 2001.06.09 that -oldstyle_liblookup may be necessary
-# to keep from finding an ancient system libjpeg.so that isn't compatible with
-# NetPBM.  Michael Long found that /usr/local/lib is not in the default
-# search path, or not soon enough, and he was getting an old libjpeg that
-# caused all the jpeg symbol references to be unresolved.  He had installed
-# a new libjpeg in /usr/local/lib.
-#LDFLAGS = -call_shared -oldstyle_liblookup -L/usr/local/lib
-#AIX:
-#LDFLAGS=-L /usr/pubsw/lib
-#HP-UX:
-#LDFLAGS = -Wl,+b,/usr/pubsw/lib
-#FreeBSD:
-#LDFLAGS = -L/usr/local/lib
-
-# Linker options for created Netpbm shared libraries.
-
-# Here, $(SONAME) resolves to the soname for the shared library being created.
-# The following are gcc options.  This works on GNU libc systems.
-LDSHLIB = -shared -Wl,-soname,$(SONAME)
-# You need -nostart instead of -shared on BeOS.  Though the BeOS compiler is
-# ostensibly gcc, it has the -nostart option, which is not mentioned in gcc
-# documentation and doesn't exist in at least one non-BeOS installation.
-# BeOS doesn't have sonames built in.
-#LDSHLIB = -nostart
-#LDSHLIB = -G
-# Solaris, SunOS with GNU Ld, SCO:
-# These systems have no soname option.
-#LDSHLIB = -shared
-# Solaris with Sun Ld:
-#LDSHLIB = -Wl,-Bdynamic,-G,-h,$(SONAME) 
-#Tru64:
-#LDSHLIB = -shared -expect_unresolved "*"
-#AIX:
-#LDSHLIB = ???
-
-# On older systems, you have to make shared libraries out of position
-# independent code, so you need -fpic or fPIC here.  (The rule is: if
-# -fpic works, use it.  If it bombs, go to fPIC).  On newer systems,
-# it isn't necessary, but can save real memory at the expense of
-# execution speed.  Without position independent code, the library
-# loader may have to patch addresses into the executable text.  On an
-# older system, this would cause a program crash because the loader
-# would be writing into read-only shared memory.  But on newer
-# systems, the system silently creates a private mapping of the page
-# or segment being modified (the "copy on write" phenomenon).  So it
-# needs its own private real page frame.  In one experiment, A second
-# copy of Pbmtext used 16K less real memory when built with -fpic than
-# when built without.  2001.06.02.
-
-CFLAGS_SHLIB = 
-# Solaris or SunOS with gcc, and NetBSD:
-#CFLAGS_SHLIB = -fpic
-#CFLAGS_SHLIB = -fPIC
-# Sun compiler:
-#CFLAGS_SHLIB = -Kpic
-#CFLAGS_SHLIB = -KPIC
-
-# SHLIB_CLIB is the link option to include the C library in a shared library,
-# normally "-lc".  On typical systems, this serves no purpose.  On some,
-# though, it causes information about which C library to use to be recorded
-# in the shared library and thus choose the correct library among several or
-# avoid using an incompatible one.  But on some systems, the link fails.
-# On 2002.09.30, "John H. DuBois III" <spcecdt@armory.com> reports that on 
-# SCO OpenServer, he gets the following error message with -lc:
-#
-#  -lc; relocations referenced  ;  from file(s) /usr/ccs/lib/libc.so(random.o);
-#   fatal error: relocations remain against allocatable but non-writable 
-#   section: ; .text
-
-SHLIB_CLIB = -lc
-# SCO:
-SHLIB_CLIB =
-
-# The following variables tell where your various libraries on which
-# Netpbm depends live.  The LIBxxx variable is a full file
-# specification of the link library (not necessarily the library used
-# at run time).  e.g. "/usr/local/lib/graphics/libpng.so".  It usually
-# doesn't matter if the library prefix and suffix are right -- you can
-# use "lib" and ".so" or ".a" regardless of what your system actually
-# uses because these just turn into "-L" and "-l" linker options
-# anyway.  ".a" implies a static library for some purposes, though.
-# If you don't have the library in question, use a value of NONE for
-# LIBxxx and the build will simply skip the programs that require that
-# library.  If the library is in your linker's (or the Netpbm build's)
-# default search path, leave off the directory part, e.g. "libpng.so".
-
-# The xxxHDR_DIR variable is the directory in which the interface
-# headers for the library live (e.g. /usr/include).  If they are in your
-# compiler's default search path, set this variable to null.
-
-# This is where the Netpbm shared libraries will reside when Netpbm is
-# fully installed.  In some configurations, the Netpbm builder builds
-# this information into the Netpbm executables.  This does NOT affect
-# where the Netpbm installer installs the libraries.  A null value
-# means the libraries are in a default search path used by the runtime
-# library loader.
-NETPBMLIB_RUNTIME_PATH = 
-#NETPBMLIB_RUNTIME_PATH = /usr/lib/netpbm
-
-# The TIFF library.  See above.  If you want to build the tiff
-# converters, you must have the tiff library already installed.
-
-TIFFLIB = NONE
-TIFFHDR_DIR =
-
-#TIFFLIB = libtiff.so
-#TIFFHDR_DIR = /usr/include/libtiff
-#NetBSD:
-#TIFFLIB = $(LOCALBASE)/lib/libtiff.so
-#TIFFHDR_DIR = $(LOCALBASE)/include
-# OSF, Tru64:
-#TIFFLIB = /usr/local1/DEC/lib/libtiff.so
-#TIFFHDR_DIR = /usr/local1/DEC/include
-
-# If your Tiff library depends on libraries other than libc and libm, 
-# put the required linker options here.
-TIFFLIB_LDFLAGS =
-# John Milton <jmilton@fundsxpress.com> in September 2000 and
-# John Bartelt <bartelt@SLAC.Stanford.EDU> in August 2002 reported
-# needing libz with libtiff 3.5.5 (with and without LZW patch):
-#TIFFLIB_LDFLAGS = -lz
-
-# The JPEG library.  See above.  If you want to build the jpeg
-# converters you must have the jpeg library already installed.
-
-# Tiff files can use JPEG compression, so the Tiff library can reference
-# the JPEG library.  If your Tiff library references a dynamic JPEG 
-# library, you must specify at least JPEGLIB here, or the Tiff
-# converters will not build.  Note that your Tiff library may have the
-# JPEG stuff statically linked in, in which case you won't need 
-# JPEGLIB in order to build the Tiff converters.
-
-JPEGLIB = NONE
-JPEGHDR_DIR =
-#JPEGLIB = libjpeg.so
-#JPEGHDR_DIR = /usr/include/jpeg
-# Netbsd:
-#JPEGLIB = ${LOCALBASE}/lib/libjpeg.so
-#JPEGHDR_DIR = ${LOCALBASE}/include
-# OSF, Tru64:
-#JPEGLIB = /usr/local1/DEC/libjpeg.so
-#JPEGHDR_DIR = /usr/local1/DEC/include
-# Typical:
-#JPEGLIB = /usr/local/lib/libjpeg.so
-#JPEGHDR_DIR = /usr/local/include
-# Don't build JPEG stuff:
-#JPEGLIB = NONE
-
-
-# The PNG library.  See above.  If you want to build the PNG
-# converters you must have the PNG library already installed.
-
-# The PNG library, by convention starting around April 2002, gets installed
-# with names that include a version number, such as libpng10.a and header
-# files in /usr/include/libpng10.
-# option.
-PNGLIB = NONE
-PNGVER = 
-#PNGLIB = libpng$(PNGVER).so
-#PNGHDR_DIR = /usr/include/libpng$(PNGVER)
-# NetBSD:
-#PNGLIB = $(LOCALBASE)/lib/libpng$(PNGVER).so
-#PNGHDR_DIR = $(LOCALBASE)/include
-# OSF/Tru64:
-#PNGLIB = /usr/local1/DEC/lib/libpng$(PNGVER).so
-#PNGHDR_DIR = /usr/local1/DEC/include
-
-# The zlib compression library.  See above.  You need it to build
-# anything that needs the PNG library (see above).  If you selected
-# NONE for the PNG library, it doesn't matter what you specify here --
-# it won't get used.
-
-ZLIB = NONE
-ZHDR_DIR = 
-#ZLIB = libz.so
-
-# The JBIG lossless image compression library (aka JBIG-KIT):
-
-JBIGLIB = $(BUILDDIR)/converter/other/jbig/libjbig.a
-JBIGHDR_DIR = $(SRCDIR)/converter/other/jbig
-
-# The Jasper JPEG-2000 image compression library (aka JasPer):
-JASPERLIB = $(INTERNAL_JASPERLIB)
-JASPERHDR_DIR = $(INTERNAL_JASPERHDR_DIR)
-
-# And the Utah Raster Toolkit (aka URT aka RLE) library:
-
-URTLIB = $(BUILDDIR)/urt/librle.a
-URTHDR_DIR = $(SRCDIR)/urt
-
-# The Linux SVGA library (Svgalib) is a facility for displaying graphics
-# on the Linux console.  It is required by Ppmsvgalib.
-
-LINUXSVGALIB = NONE
-LINUXSVGAHDR_DIR = 
-
-#LINUXSVGALIB_DIR = 
-#LINUXSVGAHDR_DIR = /usr/include/vgalib
-
-# These are -l options to link in the network libraries.  Often, these are
-# built into the standard C library, so this can be null.  If you don't 
-# want any network functions, make it NONE.  The only thing that requires
-# network functions is the option in ppmtompeg to run it on multiple
-# computers simultaneously.
-
-NETWORKLD = 
-# Solaris, SunOS:
-#NETWORKLD = -lsocket -lnsl
-# SCO:
-#NETWORKLD = -lsocket, -lresolv
-# Don't build network functions:
-#DJGPP/Windows, Tru64:
-#   (there's some minor header problem that prevents network functions from 
-#   building on Tru64 2000.10.06)
-#NETWORKLD = NONE
-
-VMS = 
-#VMS:
-#VMS = yes
-
-# The following variables are used only by 'make install' (and the
-# variants of it).  Paths here don't, for example, get built into any
-# programs.
-
-# File permissions for installed files.
-# Note that on some systems (e.g. Solaris), 'install' can't use the 
-# mnemonic permissions - you have to use octal.
-
-# binaries (pbmmake, etc)
-INSTALL_PERM_BIN =  755       # u=rwx,go=rx
-# shared libraries (libpbm.so, etc)
-INSTALL_PERM_LIBD = 755       # u=rwx,go=rx
-# static libraries (libpbm.a, etc)
-INSTALL_PERM_LIBS = 644       # u=rw,go=r
-# header files (pbm.h, etc)
-INSTALL_PERM_HDR =  644       # u=rw,go=r
-# man pages (pbmmake.1, etc)
-INSTALL_PERM_MAN =  644       # u=rw,go=r
-# data files (pnmtopalm color maps, etc)
-INSTALL_PERM_DATA = 644       # u=rw,go=r
-
-# Specify the suffix that want the man pages to have.
-
-SUFFIXMANUALS1 = 1
-SUFFIXMANUALS3 = 3
-SUFFIXMANUALS5 = 5
-
-#NETPBMLIBTYPE tells the kind of libraries that will get built to hold the
-#Netpbm library functions.  The value is used only in make file tests.
-# "unixshared" means a unix-style shared library, typically named like 
-# libxyz.so.2.3
-NETPBMLIBTYPE = unixshared
-# "unixstatic" means a unix-style static library, (like libxyz.a)
-#NETPBMLIBTYPE = unixstatic
-# "dll" means a Windows DLL shared library
-#NETPBMLIBTYPE = dll
-# "dylib" means a Darwin/Mac OS shared library
-#NETPBMLIBTYPE = dylib
-
-#NETPBMLIBSUFFIX is the suffix used on whatever kind of library is 
-#selected above.  All this is used for is to construct library names.
-#The make files never examine the actual value.
-NETPBMLIBSUFFIX = so
-# "a" is the suffix for unix-style static libraries.  Also for AIX shared
-# libraries.
-#NETPBMLIBSUFFIX = a
-# For HP-UX shared libraries:
-#NETPBMLIBSUFFIX = sl
-# Darwin/Mac OS shared library:
-#NETPBMLIBSUFFIX = dylib
-# Windows shared library:
-#NETPBMLIBSUFFIX = dll
-
-#STATICLIB_TOO is "y" to signify that you want a static library built
-#and installed in addition to whatever library type you specified by
-#NETPBMLIBTYPE.  If NETPBMLIBTYPE specified a static library,
-#STATICLIB_TOO simply has no effect.
-STATICLIB_TOO = y
-#STATICLIB_TOO = n
-
-#STATICLIBSUFFIX is the suffix that static libraries have.  It's
-#meaningless if you aren't building static libraries.
-STATICLIBSUFFIX = a
-
-#SHLIBPREFIXLIST is a blank-delimited list of prefixes that a filename
-#of a shared library may have on this system.  Traditionally, it's
-#just "lib", as in libc or libpbm.  On Windows, though, varying
-#prefixes are used when multiple alternative forms of a library are
-#available.  The first prefix in this list is what we use to name the
-#Netpbm shared libraries.
-SHLIBPREFIXLIST = lib
-#Cygwin:
-#SHLIBPREFIXLIST = cyg lib
-
-NETPBMSHLIBPREFIX = $(firstword $(SHLIBPREFIXLIST))
-
-#DLLVER is used to version the DLLs built on cygwin or other
-#windowsish platforms.  We can't add this to LIBROOT, or we'd
-#version the static libs (which is bad).  We can't add this
-#at the end of the name (like unix does with so numbers) because
-#windows will only load dlls whose name ends in "dll".  So,
-#we have this variable, which becomes the end of the library "root" name
-#for DLLs only.
-DLLVER =
-#Cygwin
-#DLLVER = $(NETPBM_MAJOR_RELEASE)
-
-#NETPBM_DOCURL is the URL of the main documentation page for Netpbm.
-#This is a directory which contains a file for each Netpbm program,
-#library, and file type.  E.g. The documentation for jpegtopnm might be in
-#http://netpbm.sourceforge.net/doc/jpegtopnm.html .  This value gets
-#installed in the man pages (which say no more than to read the webpage)
-#and in the Webman netpbm.url file.
-NETPBM_DOCURL = http://netpbm.sourceforge.net/doc/
-#For a system with no web access, but a local copy of the doc:
-#NETPBM_DOCURL = file:/usr/doc/netpbm/
-
-# This is where everything goes when you do 'make package':
-PKGDIR = /tmp/netpbm
-
-
-
-####Lines above were copied from Makefile.config.in by 'configure'.
-####Lines below were added by 'configure' based on the GNU platform.
-DEFAULT_TARGET = nonmerge
-NETPBMLIBTYPE=unixshared
-NETPBMLIBSUFFIX=so
-STATICLIB_TOO=n
-CFLAGS = -pedantic -O3 -Wall -Wno-uninitialized -Wmissing-declarations -Wimplicit -Wwrite-strings
-CFLAGS_MERGE = -Wno-missing-declarations
-TIFFLIB = libtiff.so
-JPEGLIB = libjpeg.so
-PNGLIB = libpng.so
-ZLIB = libz.so
diff --git a/media-libs/netpbm/files/10.11.10/Makefile.svga b/media-libs/netpbm/files/10.11.10/Makefile.svga
deleted file mode 100644
index 43f6c65531ff..000000000000
--- a/media-libs/netpbm/files/10.11.10/Makefile.svga
+++ /dev/null
@@ -1,478 +0,0 @@
-####This file was automatically created by 'configure.'
-####Many variables are set twice -- a generic setting, then 
-####a system-specific override at the bottom of the file.
-####
-# This is a make file inclusion, to be included in all the Netpbm make
-# files.
-
-# This file is meant to contain variable settings that customize the
-# build for a particular target system configuration.
-
-# The distribution contains the file Makefile.config.in.  You edit
-# Makefile.config.in in ways relevant to your particular environment 
-# to create Makefile.config.  The "configure" program will do this
-# for you in simple cases.
-
-# Some of the variables that the including make file must set for this
-# file to work:
-#
-#  SRCDIR: The directory at the top of the Netpbm source tree.  Note that
-#  this is typically a relative directory, and it must be relative to the
-#  make file that includes this file.  So it's normally "..".
-
-DEFAULT_TARGET = nonmerge
-#DEFAULT_TARGET = merge
-
-# Fiasco has some special requirements that make it fail to compile on
-# some systems, and since it isn't very important, just set this to "N"
-# and skip it on those systems unless you want to debug it and fix it.
-# OpenBSD:
-#BUILD_FIASCO = N
-BUILD_FIASCO = Y
-
-# The following are commands for the build process to use.  These values
-# do not get built into anything.
-
-# The C compiler (including macro preprocessor)
-#CC = gcc
-# Note that 'cc' is usually an alias for whatever is the main compiler
-# on a system, e.g. the GNU Compiler on Linux.
-CC = cc
-
-# The linker.
-LD = $(CC)
-#LD = ld
-#Tru64:
-#LD = cc
-#LD = gcc 
-
-# CC and LD are for building the Netpbm programs, which are not necessarily
-# intended to run on the same system on which Make is running.  But when we 
-# build a build tool such as Libopt, it is meant to run only on the same 
-# system on which the Make is running.  The variables below define programs
-# to use to compile and link build tools.
-CC_FOR_BUILD = $(CC)
-LD_FOR_BUILD = $(LD)
-
-# MAKE is set automatically by Make to what was used to invoke Make.
-
-INSTALL = $(SRCDIR)/buildtools/install.sh
-#Solaris:
-#INSTALL = /usr/ucb/install
-#Tru64:
-#INSTALL = installbsd
-#OSF1:
-#INSTALL = $(SRCDIR)/buildtools/installosf
-#Red Hat Linux:
-#INSTALL = install
-
-# STRIPFLAG is the option you pass to the above install program to make it
-# strip unnecessary information out of binaries.
-STRIPFLAG = -s
-# If you don't want to strip the binaries, just leave it null:
-#STRIPFLAG = 
-
-SYMLINK = ln -s
-# At least some Windows environments don't have any concept of symbolic
-# links, but direct copies are usually a passable alternative.
-#SYMLINK = cp
-
-#MANPAGE_FORMAT is "nroff" or "cat".  It determines in what format the
-#pointer man pages are installed (ready to nroff, or ready to cat).  
-#A pointer man pages is just a single-paragraph pages that tells you there is
-#no man page for the program, to look at the HTML documentation instead.
-MANPAGE_FORMAT = nroff
-#MANPAGE_FORMAT = cat
-
-AR = ar
-RANLIB = ranlib
-# IRIX, SCO don't have Ranlib:
-#RANLIB = true
-LEX = flex
-# Solaris:
-# LEX = flex -e
-# Or just skip parts that need Lex:
-# LEX =
-
-# C compiler options 
-
-# gcc:
-# -ansi and -Werror should work too, but are not included
-# by default because there's no point in daring the build to fail.
-# -pedantic isn't a problem because it causes at worst a warning.
-#CFLAGS = -pedantic -O3 -Wall -Wno-uninitialized -Wmissing-declarations
-# The merged programs have a main_XXX subroutine instead of main(),
-# which would cause a warning with -Wmissing-declarations
-#CFLAGS_MERGE = -Wno-missing-declarations
-# On DEC Tru64 4.0F (at least), you need -DLONG_32 for ppmtompeg.
-#Tru64:
-#CFLAGS = -O2 -std1 -DLONG_32
-#AIX:
-#CFLAGS= -O3 -D_ALL_SOURCE
-#HP-UX:
-#CFLAGS= -O3 -fPIC
-
-
-# EXE is a suffix that the linker puts on any executable it generates.
-# In cygwin, this is .exe and most programs deal with its existence without
-# us having to know about it.  Some don't though, so set this:
-
-EXE =
-#Cygwin, DJGPP/Windows:
-#EXE = .exe
-  
-# linker options.  
-
-# On some systems you have to build into an executable the list of
-# directories where its dynamically linked libraries can be found at
-# run time.  This is typically done with a -R or --rpath linker
-# option.  Even on systems that don't require it, you might prefer to do
-# that rather than set up environment variables or configuration files
-# to tell the system where the libraries are.  A "Y" here means to put
-# the directory information in the executable at link time.
-
-NEED_RUNTIME_PATH = N
-# Solaris, SunOS, NetBSD:
-#NEED_RUNTIME_PATH = Y
-
-LDFLAGS =
-# Eunice users may want to use -noshare so that the executables can
-# run standalone:
-#LDFLAGS = -noshare
-#Tru64:
-# Russ Allberry says on 2001.06.09 that -oldstyle_liblookup may be necessary
-# to keep from finding an ancient system libjpeg.so that isn't compatible with
-# NetPBM.  Michael Long found that /usr/local/lib is not in the default
-# search path, or not soon enough, and he was getting an old libjpeg that
-# caused all the jpeg symbol references to be unresolved.  He had installed
-# a new libjpeg in /usr/local/lib.
-#LDFLAGS = -call_shared -oldstyle_liblookup -L/usr/local/lib
-#AIX:
-#LDFLAGS=-L /usr/pubsw/lib
-#HP-UX:
-#LDFLAGS = -Wl,+b,/usr/pubsw/lib
-#FreeBSD:
-#LDFLAGS = -L/usr/local/lib
-
-# Linker options for created Netpbm shared libraries.
-
-# Here, $(SONAME) resolves to the soname for the shared library being created.
-# The following are gcc options.  This works on GNU libc systems.
-LDSHLIB = -shared -Wl,-soname,$(SONAME)
-# You need -nostart instead of -shared on BeOS.  Though the BeOS compiler is
-# ostensibly gcc, it has the -nostart option, which is not mentioned in gcc
-# documentation and doesn't exist in at least one non-BeOS installation.
-# BeOS doesn't have sonames built in.
-#LDSHLIB = -nostart
-#LDSHLIB = -G
-# Solaris, SunOS with GNU Ld, SCO:
-# These systems have no soname option.
-#LDSHLIB = -shared
-# Solaris with Sun Ld:
-#LDSHLIB = -Wl,-Bdynamic,-G,-h,$(SONAME) 
-#Tru64:
-#LDSHLIB = -shared -expect_unresolved "*"
-#AIX:
-#LDSHLIB = ???
-
-# On older systems, you have to make shared libraries out of position
-# independent code, so you need -fpic or fPIC here.  (The rule is: if
-# -fpic works, use it.  If it bombs, go to fPIC).  On newer systems,
-# it isn't necessary, but can save real memory at the expense of
-# execution speed.  Without position independent code, the library
-# loader may have to patch addresses into the executable text.  On an
-# older system, this would cause a program crash because the loader
-# would be writing into read-only shared memory.  But on newer
-# systems, the system silently creates a private mapping of the page
-# or segment being modified (the "copy on write" phenomenon).  So it
-# needs its own private real page frame.  In one experiment, A second
-# copy of Pbmtext used 16K less real memory when built with -fpic than
-# when built without.  2001.06.02.
-
-CFLAGS_SHLIB = 
-# Solaris or SunOS with gcc, and NetBSD:
-#CFLAGS_SHLIB = -fpic
-#CFLAGS_SHLIB = -fPIC
-# Sun compiler:
-#CFLAGS_SHLIB = -Kpic
-#CFLAGS_SHLIB = -KPIC
-
-# SHLIB_CLIB is the link option to include the C library in a shared library,
-# normally "-lc".  On typical systems, this serves no purpose.  On some,
-# though, it causes information about which C library to use to be recorded
-# in the shared library and thus choose the correct library among several or
-# avoid using an incompatible one.  But on some systems, the link fails.
-# On 2002.09.30, "John H. DuBois III" <spcecdt@armory.com> reports that on 
-# SCO OpenServer, he gets the following error message with -lc:
-#
-#  -lc; relocations referenced  ;  from file(s) /usr/ccs/lib/libc.so(random.o);
-#   fatal error: relocations remain against allocatable but non-writable 
-#   section: ; .text
-
-SHLIB_CLIB = -lc
-# SCO:
-SHLIB_CLIB =
-
-# The following variables tell where your various libraries on which
-# Netpbm depends live.  The LIBxxx variable is a full file
-# specification of the link library (not necessarily the library used
-# at run time).  e.g. "/usr/local/lib/graphics/libpng.so".  It usually
-# doesn't matter if the library prefix and suffix are right -- you can
-# use "lib" and ".so" or ".a" regardless of what your system actually
-# uses because these just turn into "-L" and "-l" linker options
-# anyway.  ".a" implies a static library for some purposes, though.
-# If you don't have the library in question, use a value of NONE for
-# LIBxxx and the build will simply skip the programs that require that
-# library.  If the library is in your linker's (or the Netpbm build's)
-# default search path, leave off the directory part, e.g. "libpng.so".
-
-# The xxxHDR_DIR variable is the directory in which the interface
-# headers for the library live (e.g. /usr/include).  If they are in your
-# compiler's default search path, set this variable to null.
-
-# This is where the Netpbm shared libraries will reside when Netpbm is
-# fully installed.  In some configurations, the Netpbm builder builds
-# this information into the Netpbm executables.  This does NOT affect
-# where the Netpbm installer installs the libraries.  A null value
-# means the libraries are in a default search path used by the runtime
-# library loader.
-NETPBMLIB_RUNTIME_PATH = 
-#NETPBMLIB_RUNTIME_PATH = /usr/lib/netpbm
-
-# The TIFF library.  See above.  If you want to build the tiff
-# converters, you must have the tiff library already installed.
-
-TIFFLIB = NONE
-TIFFHDR_DIR =
-
-#TIFFLIB = libtiff.so
-#TIFFHDR_DIR = /usr/include/libtiff
-#NetBSD:
-#TIFFLIB = $(LOCALBASE)/lib/libtiff.so
-#TIFFHDR_DIR = $(LOCALBASE)/include
-# OSF, Tru64:
-#TIFFLIB = /usr/local1/DEC/lib/libtiff.so
-#TIFFHDR_DIR = /usr/local1/DEC/include
-
-# If your Tiff library depends on libraries other than libc and libm, 
-# put the required linker options here.
-TIFFLIB_LDFLAGS =
-# John Milton <jmilton@fundsxpress.com> in September 2000 and
-# John Bartelt <bartelt@SLAC.Stanford.EDU> in August 2002 reported
-# needing libz with libtiff 3.5.5 (with and without LZW patch):
-#TIFFLIB_LDFLAGS = -lz
-
-# The JPEG library.  See above.  If you want to build the jpeg
-# converters you must have the jpeg library already installed.
-
-# Tiff files can use JPEG compression, so the Tiff library can reference
-# the JPEG library.  If your Tiff library references a dynamic JPEG 
-# library, you must specify at least JPEGLIB here, or the Tiff
-# converters will not build.  Note that your Tiff library may have the
-# JPEG stuff statically linked in, in which case you won't need 
-# JPEGLIB in order to build the Tiff converters.
-
-JPEGLIB = NONE
-JPEGHDR_DIR =
-#JPEGLIB = libjpeg.so
-#JPEGHDR_DIR = /usr/include/jpeg
-# Netbsd:
-#JPEGLIB = ${LOCALBASE}/lib/libjpeg.so
-#JPEGHDR_DIR = ${LOCALBASE}/include
-# OSF, Tru64:
-#JPEGLIB = /usr/local1/DEC/libjpeg.so
-#JPEGHDR_DIR = /usr/local1/DEC/include
-# Typical:
-#JPEGLIB = /usr/local/lib/libjpeg.so
-#JPEGHDR_DIR = /usr/local/include
-# Don't build JPEG stuff:
-#JPEGLIB = NONE
-
-
-# The PNG library.  See above.  If you want to build the PNG
-# converters you must have the PNG library already installed.
-
-# The PNG library, by convention starting around April 2002, gets installed
-# with names that include a version number, such as libpng10.a and header
-# files in /usr/include/libpng10.
-# option.
-PNGLIB = NONE
-PNGVER = 
-#PNGLIB = libpng$(PNGVER).so
-#PNGHDR_DIR = /usr/include/libpng$(PNGVER)
-# NetBSD:
-#PNGLIB = $(LOCALBASE)/lib/libpng$(PNGVER).so
-#PNGHDR_DIR = $(LOCALBASE)/include
-# OSF/Tru64:
-#PNGLIB = /usr/local1/DEC/lib/libpng$(PNGVER).so
-#PNGHDR_DIR = /usr/local1/DEC/include
-
-# The zlib compression library.  See above.  You need it to build
-# anything that needs the PNG library (see above).  If you selected
-# NONE for the PNG library, it doesn't matter what you specify here --
-# it won't get used.
-
-ZLIB = NONE
-ZHDR_DIR = 
-#ZLIB = libz.so
-
-# The JBIG lossless image compression library (aka JBIG-KIT):
-
-JBIGLIB = $(BUILDDIR)/converter/other/jbig/libjbig.a
-JBIGHDR_DIR = $(SRCDIR)/converter/other/jbig
-
-# The Jasper JPEG-2000 image compression library (aka JasPer):
-JASPERLIB = $(INTERNAL_JASPERLIB)
-JASPERHDR_DIR = $(INTERNAL_JASPERHDR_DIR)
-
-# And the Utah Raster Toolkit (aka URT aka RLE) library:
-
-URTLIB = $(BUILDDIR)/urt/librle.a
-URTHDR_DIR = $(SRCDIR)/urt
-
-# The Linux SVGA library (Svgalib) is a facility for displaying graphics
-# on the Linux console.  It is required by Ppmsvgalib.
-
-LINUXSVGALIB = NONE
-LINUXSVGAHDR_DIR = 
-
-#LINUXSVGALIB_DIR = 
-#LINUXSVGAHDR_DIR = /usr/include/vgalib
-
-# These are -l options to link in the network libraries.  Often, these are
-# built into the standard C library, so this can be null.  If you don't 
-# want any network functions, make it NONE.  The only thing that requires
-# network functions is the option in ppmtompeg to run it on multiple
-# computers simultaneously.
-
-NETWORKLD = 
-# Solaris, SunOS:
-#NETWORKLD = -lsocket -lnsl
-# SCO:
-#NETWORKLD = -lsocket, -lresolv
-# Don't build network functions:
-#DJGPP/Windows, Tru64:
-#   (there's some minor header problem that prevents network functions from 
-#   building on Tru64 2000.10.06)
-#NETWORKLD = NONE
-
-VMS = 
-#VMS:
-#VMS = yes
-
-# The following variables are used only by 'make install' (and the
-# variants of it).  Paths here don't, for example, get built into any
-# programs.
-
-# File permissions for installed files.
-# Note that on some systems (e.g. Solaris), 'install' can't use the 
-# mnemonic permissions - you have to use octal.
-
-# binaries (pbmmake, etc)
-INSTALL_PERM_BIN =  755       # u=rwx,go=rx
-# shared libraries (libpbm.so, etc)
-INSTALL_PERM_LIBD = 755       # u=rwx,go=rx
-# static libraries (libpbm.a, etc)
-INSTALL_PERM_LIBS = 644       # u=rw,go=r
-# header files (pbm.h, etc)
-INSTALL_PERM_HDR =  644       # u=rw,go=r
-# man pages (pbmmake.1, etc)
-INSTALL_PERM_MAN =  644       # u=rw,go=r
-# data files (pnmtopalm color maps, etc)
-INSTALL_PERM_DATA = 644       # u=rw,go=r
-
-# Specify the suffix that want the man pages to have.
-
-SUFFIXMANUALS1 = 1
-SUFFIXMANUALS3 = 3
-SUFFIXMANUALS5 = 5
-
-#NETPBMLIBTYPE tells the kind of libraries that will get built to hold the
-#Netpbm library functions.  The value is used only in make file tests.
-# "unixshared" means a unix-style shared library, typically named like 
-# libxyz.so.2.3
-NETPBMLIBTYPE = unixshared
-# "unixstatic" means a unix-style static library, (like libxyz.a)
-#NETPBMLIBTYPE = unixstatic
-# "dll" means a Windows DLL shared library
-#NETPBMLIBTYPE = dll
-# "dylib" means a Darwin/Mac OS shared library
-#NETPBMLIBTYPE = dylib
-
-#NETPBMLIBSUFFIX is the suffix used on whatever kind of library is 
-#selected above.  All this is used for is to construct library names.
-#The make files never examine the actual value.
-NETPBMLIBSUFFIX = so
-# "a" is the suffix for unix-style static libraries.  Also for AIX shared
-# libraries.
-#NETPBMLIBSUFFIX = a
-# For HP-UX shared libraries:
-#NETPBMLIBSUFFIX = sl
-# Darwin/Mac OS shared library:
-#NETPBMLIBSUFFIX = dylib
-# Windows shared library:
-#NETPBMLIBSUFFIX = dll
-
-#STATICLIB_TOO is "y" to signify that you want a static library built
-#and installed in addition to whatever library type you specified by
-#NETPBMLIBTYPE.  If NETPBMLIBTYPE specified a static library,
-#STATICLIB_TOO simply has no effect.
-STATICLIB_TOO = y
-#STATICLIB_TOO = n
-
-#STATICLIBSUFFIX is the suffix that static libraries have.  It's
-#meaningless if you aren't building static libraries.
-STATICLIBSUFFIX = a
-
-#SHLIBPREFIXLIST is a blank-delimited list of prefixes that a filename
-#of a shared library may have on this system.  Traditionally, it's
-#just "lib", as in libc or libpbm.  On Windows, though, varying
-#prefixes are used when multiple alternative forms of a library are
-#available.  The first prefix in this list is what we use to name the
-#Netpbm shared libraries.
-SHLIBPREFIXLIST = lib
-#Cygwin:
-#SHLIBPREFIXLIST = cyg lib
-
-NETPBMSHLIBPREFIX = $(firstword $(SHLIBPREFIXLIST))
-
-#DLLVER is used to version the DLLs built on cygwin or other
-#windowsish platforms.  We can't add this to LIBROOT, or we'd
-#version the static libs (which is bad).  We can't add this
-#at the end of the name (like unix does with so numbers) because
-#windows will only load dlls whose name ends in "dll".  So,
-#we have this variable, which becomes the end of the library "root" name
-#for DLLs only.
-DLLVER =
-#Cygwin
-#DLLVER = $(NETPBM_MAJOR_RELEASE)
-
-#NETPBM_DOCURL is the URL of the main documentation page for Netpbm.
-#This is a directory which contains a file for each Netpbm program,
-#library, and file type.  E.g. The documentation for jpegtopnm might be in
-#http://netpbm.sourceforge.net/doc/jpegtopnm.html .  This value gets
-#installed in the man pages (which say no more than to read the webpage)
-#and in the Webman netpbm.url file.
-NETPBM_DOCURL = http://netpbm.sourceforge.net/doc/
-#For a system with no web access, but a local copy of the doc:
-#NETPBM_DOCURL = file:/usr/doc/netpbm/
-
-# This is where everything goes when you do 'make package':
-PKGDIR = /tmp/netpbm
-
-
-
-####Lines above were copied from Makefile.config.in by 'configure'.
-####Lines below were added by 'configure' based on the GNU platform.
-DEFAULT_TARGET = nonmerge
-NETPBMLIBTYPE=unixshared
-NETPBMLIBSUFFIX=so
-STATICLIB_TOO=n
-CFLAGS = -pedantic -O3 -Wall -Wno-uninitialized -Wmissing-declarations -Wimplicit -Wwrite-strings
-CFLAGS_MERGE = -Wno-missing-declarations
-TIFFLIB = libtiff.so
-JPEGLIB = libjpeg.so
-PNGLIB = libpng.so
-ZLIB = libz.so
-LINUXSVGAHDR_DIR = /usr/include
-LINUXSVGALIB = /usr/lib/libvga.so
diff --git a/media-libs/netpbm/files/10.11.12/Makefile.config b/media-libs/netpbm/files/10.11.12/Makefile.config
deleted file mode 100644
index 37e0b7a9bea6..000000000000
--- a/media-libs/netpbm/files/10.11.12/Makefile.config
+++ /dev/null
@@ -1,476 +0,0 @@
-####This file was automatically created by 'configure.'
-####Many variables are set twice -- a generic setting, then 
-####a system-specific override at the bottom of the file.
-####
-# This is a make file inclusion, to be included in all the Netpbm make
-# files.
-
-# This file is meant to contain variable settings that customize the
-# build for a particular target system configuration.
-
-# The distribution contains the file Makefile.config.in.  You edit
-# Makefile.config.in in ways relevant to your particular environment 
-# to create Makefile.config.  The "configure" program will do this
-# for you in simple cases.
-
-# Some of the variables that the including make file must set for this
-# file to work:
-#
-#  SRCDIR: The directory at the top of the Netpbm source tree.  Note that
-#  this is typically a relative directory, and it must be relative to the
-#  make file that includes this file.  So it's normally "..".
-
-DEFAULT_TARGET = nonmerge
-#DEFAULT_TARGET = merge
-
-# Fiasco has some special requirements that make it fail to compile on
-# some systems, and since it isn't very important, just set this to "N"
-# and skip it on those systems unless you want to debug it and fix it.
-# OpenBSD:
-#BUILD_FIASCO = N
-BUILD_FIASCO = Y
-
-# The following are commands for the build process to use.  These values
-# do not get built into anything.
-
-# The C compiler (including macro preprocessor)
-#CC = gcc
-# Note that 'cc' is usually an alias for whatever is the main compiler
-# on a system, e.g. the GNU Compiler on Linux.
-CC = cc
-
-# The linker.
-LD = $(CC)
-#LD = ld
-#Tru64:
-#LD = cc
-#LD = gcc 
-
-# CC and LD are for building the Netpbm programs, which are not necessarily
-# intended to run on the same system on which Make is running.  But when we 
-# build a build tool such as Libopt, it is meant to run only on the same 
-# system on which the Make is running.  The variables below define programs
-# to use to compile and link build tools.
-CC_FOR_BUILD = $(CC)
-LD_FOR_BUILD = $(LD)
-
-# MAKE is set automatically by Make to what was used to invoke Make.
-
-INSTALL = $(SRCDIR)/buildtools/install.sh
-#Solaris:
-#INSTALL = /usr/ucb/install
-#Tru64:
-#INSTALL = installbsd
-#OSF1:
-#INSTALL = $(SRCDIR)/buildtools/installosf
-#Red Hat Linux:
-#INSTALL = install
-
-# STRIPFLAG is the option you pass to the above install program to make it
-# strip unnecessary information out of binaries.
-STRIPFLAG = -s
-# If you don't want to strip the binaries, just leave it null:
-#STRIPFLAG = 
-
-SYMLINK = ln -s
-# At least some Windows environments don't have any concept of symbolic
-# links, but direct copies are usually a passable alternative.
-#SYMLINK = cp
-
-#MANPAGE_FORMAT is "nroff" or "cat".  It determines in what format the
-#pointer man pages are installed (ready to nroff, or ready to cat).  
-#A pointer man pages is just a single-paragraph pages that tells you there is
-#no man page for the program, to look at the HTML documentation instead.
-MANPAGE_FORMAT = nroff
-#MANPAGE_FORMAT = cat
-
-AR = ar
-RANLIB = ranlib
-# IRIX, SCO don't have Ranlib:
-#RANLIB = true
-LEX = flex
-# Solaris:
-# LEX = flex -e
-# Or just skip parts that need Lex:
-# LEX =
-
-# C compiler options 
-
-# gcc:
-# -ansi and -Werror should work too, but are not included
-# by default because there's no point in daring the build to fail.
-# -pedantic isn't a problem because it causes at worst a warning.
-#CFLAGS = -pedantic -O3 -Wall -Wno-uninitialized -Wmissing-declarations
-# The merged programs have a main_XXX subroutine instead of main(),
-# which would cause a warning with -Wmissing-declarations
-#CFLAGS_MERGE = -Wno-missing-declarations
-# On DEC Tru64 4.0F (at least), you need -DLONG_32 for ppmtompeg.
-#Tru64:
-#CFLAGS = -O2 -std1 -DLONG_32
-#AIX:
-#CFLAGS= -O3 -D_ALL_SOURCE
-#HP-UX:
-#CFLAGS= -O3 -fPIC
-
-
-# EXE is a suffix that the linker puts on any executable it generates.
-# In cygwin, this is .exe and most programs deal with its existence without
-# us having to know about it.  Some don't though, so set this:
-
-EXE =
-#Cygwin, DJGPP/Windows:
-#EXE = .exe
-  
-# linker options.  
-
-# On some systems you have to build into an executable the list of
-# directories where its dynamically linked libraries can be found at
-# run time.  This is typically done with a -R or --rpath linker
-# option.  Even on systems that don't require it, you might prefer to do
-# that rather than set up environment variables or configuration files
-# to tell the system where the libraries are.  A "Y" here means to put
-# the directory information in the executable at link time.
-
-NEED_RUNTIME_PATH = N
-# Solaris, SunOS, NetBSD:
-#NEED_RUNTIME_PATH = Y
-
-LDFLAGS =
-# Eunice users may want to use -noshare so that the executables can
-# run standalone:
-#LDFLAGS = -noshare
-#Tru64:
-# Russ Allberry says on 2001.06.09 that -oldstyle_liblookup may be necessary
-# to keep from finding an ancient system libjpeg.so that isn't compatible with
-# NetPBM.  Michael Long found that /usr/local/lib is not in the default
-# search path, or not soon enough, and he was getting an old libjpeg that
-# caused all the jpeg symbol references to be unresolved.  He had installed
-# a new libjpeg in /usr/local/lib.
-#LDFLAGS = -call_shared -oldstyle_liblookup -L/usr/local/lib
-#AIX:
-#LDFLAGS=-L /usr/pubsw/lib
-#HP-UX:
-#LDFLAGS = -Wl,+b,/usr/pubsw/lib
-#FreeBSD:
-#LDFLAGS = -L/usr/local/lib
-
-# Linker options for created Netpbm shared libraries.
-
-# Here, $(SONAME) resolves to the soname for the shared library being created.
-# The following are gcc options.  This works on GNU libc systems.
-LDSHLIB = -shared -Wl,-soname,$(SONAME)
-# You need -nostart instead of -shared on BeOS.  Though the BeOS compiler is
-# ostensibly gcc, it has the -nostart option, which is not mentioned in gcc
-# documentation and doesn't exist in at least one non-BeOS installation.
-# BeOS doesn't have sonames built in.
-#LDSHLIB = -nostart
-#LDSHLIB = -G
-# Solaris, SunOS with GNU Ld, SCO:
-# These systems have no soname option.
-#LDSHLIB = -shared
-# Solaris with Sun Ld:
-#LDSHLIB = -Wl,-Bdynamic,-G,-h,$(SONAME) 
-#Tru64:
-#LDSHLIB = -shared -expect_unresolved "*"
-#AIX:
-#LDSHLIB = ???
-
-# On older systems, you have to make shared libraries out of position
-# independent code, so you need -fpic or fPIC here.  (The rule is: if
-# -fpic works, use it.  If it bombs, go to fPIC).  On newer systems,
-# it isn't necessary, but can save real memory at the expense of
-# execution speed.  Without position independent code, the library
-# loader may have to patch addresses into the executable text.  On an
-# older system, this would cause a program crash because the loader
-# would be writing into read-only shared memory.  But on newer
-# systems, the system silently creates a private mapping of the page
-# or segment being modified (the "copy on write" phenomenon).  So it
-# needs its own private real page frame.  In one experiment, A second
-# copy of Pbmtext used 16K less real memory when built with -fpic than
-# when built without.  2001.06.02.
-
-CFLAGS_SHLIB = 
-# Solaris or SunOS with gcc, and NetBSD:
-#CFLAGS_SHLIB = -fpic
-#CFLAGS_SHLIB = -fPIC
-# Sun compiler:
-#CFLAGS_SHLIB = -Kpic
-#CFLAGS_SHLIB = -KPIC
-
-# SHLIB_CLIB is the link option to include the C library in a shared library,
-# normally "-lc".  On typical systems, this serves no purpose.  On some,
-# though, it causes information about which C library to use to be recorded
-# in the shared library and thus choose the correct library among several or
-# avoid using an incompatible one.  But on some systems, the link fails.
-# On 2002.09.30, "John H. DuBois III" <spcecdt@armory.com> reports that on 
-# SCO OpenServer, he gets the following error message with -lc:
-#
-#  -lc; relocations referenced  ;  from file(s) /usr/ccs/lib/libc.so(random.o);
-#   fatal error: relocations remain against allocatable but non-writable 
-#   section: ; .text
-
-SHLIB_CLIB = -lc
-# SCO:
-SHLIB_CLIB =
-
-# The following variables tell where your various libraries on which
-# Netpbm depends live.  The LIBxxx variable is a full file
-# specification of the link library (not necessarily the library used
-# at run time).  e.g. "/usr/local/lib/graphics/libpng.so".  It usually
-# doesn't matter if the library prefix and suffix are right -- you can
-# use "lib" and ".so" or ".a" regardless of what your system actually
-# uses because these just turn into "-L" and "-l" linker options
-# anyway.  ".a" implies a static library for some purposes, though.
-# If you don't have the library in question, use a value of NONE for
-# LIBxxx and the build will simply skip the programs that require that
-# library.  If the library is in your linker's (or the Netpbm build's)
-# default search path, leave off the directory part, e.g. "libpng.so".
-
-# The xxxHDR_DIR variable is the directory in which the interface
-# headers for the library live (e.g. /usr/include).  If they are in your
-# compiler's default search path, set this variable to null.
-
-# This is where the Netpbm shared libraries will reside when Netpbm is
-# fully installed.  In some configurations, the Netpbm builder builds
-# this information into the Netpbm executables.  This does NOT affect
-# where the Netpbm installer installs the libraries.  A null value
-# means the libraries are in a default search path used by the runtime
-# library loader.
-NETPBMLIB_RUNTIME_PATH = 
-#NETPBMLIB_RUNTIME_PATH = /usr/lib/netpbm
-
-# The TIFF library.  See above.  If you want to build the tiff
-# converters, you must have the tiff library already installed.
-
-TIFFLIB = NONE
-TIFFHDR_DIR =
-
-#TIFFLIB = libtiff.so
-#TIFFHDR_DIR = /usr/include/libtiff
-#NetBSD:
-#TIFFLIB = $(LOCALBASE)/lib/libtiff.so
-#TIFFHDR_DIR = $(LOCALBASE)/include
-# OSF, Tru64:
-#TIFFLIB = /usr/local1/DEC/lib/libtiff.so
-#TIFFHDR_DIR = /usr/local1/DEC/include
-
-# If your Tiff library depends on libraries other than libc and libm, 
-# put the required linker options here.
-TIFFLIB_LDFLAGS =
-# John Milton <jmilton@fundsxpress.com> in September 2000 and
-# John Bartelt <bartelt@SLAC.Stanford.EDU> in August 2002 reported
-# needing libz with libtiff 3.5.5 (with and without LZW patch):
-#TIFFLIB_LDFLAGS = -lz
-
-# The JPEG library.  See above.  If you want to build the jpeg
-# converters you must have the jpeg library already installed.
-
-# Tiff files can use JPEG compression, so the Tiff library can reference
-# the JPEG library.  If your Tiff library references a dynamic JPEG 
-# library, you must specify at least JPEGLIB here, or the Tiff
-# converters will not build.  Note that your Tiff library may have the
-# JPEG stuff statically linked in, in which case you won't need 
-# JPEGLIB in order to build the Tiff converters.
-
-JPEGLIB = NONE
-JPEGHDR_DIR =
-#JPEGLIB = libjpeg.so
-#JPEGHDR_DIR = /usr/include/jpeg
-# Netbsd:
-#JPEGLIB = ${LOCALBASE}/lib/libjpeg.so
-#JPEGHDR_DIR = ${LOCALBASE}/include
-# OSF, Tru64:
-#JPEGLIB = /usr/local1/DEC/libjpeg.so
-#JPEGHDR_DIR = /usr/local1/DEC/include
-# Typical:
-#JPEGLIB = /usr/local/lib/libjpeg.so
-#JPEGHDR_DIR = /usr/local/include
-# Don't build JPEG stuff:
-#JPEGLIB = NONE
-
-
-# The PNG library.  See above.  If you want to build the PNG
-# converters you must have the PNG library already installed.
-
-# The PNG library, by convention starting around April 2002, gets installed
-# with names that include a version number, such as libpng10.a and header
-# files in /usr/include/libpng10.
-# option.
-PNGLIB = NONE
-PNGVER = 
-#PNGLIB = libpng$(PNGVER).so
-#PNGHDR_DIR = /usr/include/libpng$(PNGVER)
-# NetBSD:
-#PNGLIB = $(LOCALBASE)/lib/libpng$(PNGVER).so
-#PNGHDR_DIR = $(LOCALBASE)/include
-# OSF/Tru64:
-#PNGLIB = /usr/local1/DEC/lib/libpng$(PNGVER).so
-#PNGHDR_DIR = /usr/local1/DEC/include
-
-# The zlib compression library.  See above.  You need it to build
-# anything that needs the PNG library (see above).  If you selected
-# NONE for the PNG library, it doesn't matter what you specify here --
-# it won't get used.
-
-ZLIB = NONE
-ZHDR_DIR = 
-#ZLIB = libz.so
-
-# The JBIG lossless image compression library (aka JBIG-KIT):
-
-JBIGLIB = $(BUILDDIR)/converter/other/jbig/libjbig.a
-JBIGHDR_DIR = $(SRCDIR)/converter/other/jbig
-
-# The Jasper JPEG-2000 image compression library (aka JasPer):
-JASPERLIB = $(INTERNAL_JASPERLIB)
-JASPERHDR_DIR = $(INTERNAL_JASPERHDR_DIR)
-
-# And the Utah Raster Toolkit (aka URT aka RLE) library:
-
-URTLIB = $(BUILDDIR)/urt/librle.a
-URTHDR_DIR = $(SRCDIR)/urt
-
-# The Linux SVGA library (Svgalib) is a facility for displaying graphics
-# on the Linux console.  It is required by Ppmsvgalib.
-
-LINUXSVGALIB = NONE
-LINUXSVGAHDR_DIR = 
-
-#LINUXSVGALIB_DIR = 
-#LINUXSVGAHDR_DIR = /usr/include/vgalib
-
-# These are -l options to link in the network libraries.  Often, these are
-# built into the standard C library, so this can be null.  If you don't 
-# want any network functions, make it NONE.  The only thing that requires
-# network functions is the option in ppmtompeg to run it on multiple
-# computers simultaneously.
-
-NETWORKLD = 
-# Solaris, SunOS:
-#NETWORKLD = -lsocket -lnsl
-# SCO:
-#NETWORKLD = -lsocket, -lresolv
-# Don't build network functions:
-#DJGPP/Windows, Tru64:
-#   (there's some minor header problem that prevents network functions from 
-#   building on Tru64 2000.10.06)
-#NETWORKLD = NONE
-
-VMS = 
-#VMS:
-#VMS = yes
-
-# The following variables are used only by 'make install' (and the
-# variants of it).  Paths here don't, for example, get built into any
-# programs.
-
-# File permissions for installed files.
-# Note that on some systems (e.g. Solaris), 'install' can't use the 
-# mnemonic permissions - you have to use octal.
-
-# binaries (pbmmake, etc)
-INSTALL_PERM_BIN =  755       # u=rwx,go=rx
-# shared libraries (libpbm.so, etc)
-INSTALL_PERM_LIBD = 755       # u=rwx,go=rx
-# static libraries (libpbm.a, etc)
-INSTALL_PERM_LIBS = 644       # u=rw,go=r
-# header files (pbm.h, etc)
-INSTALL_PERM_HDR =  644       # u=rw,go=r
-# man pages (pbmmake.1, etc)
-INSTALL_PERM_MAN =  644       # u=rw,go=r
-# data files (pnmtopalm color maps, etc)
-INSTALL_PERM_DATA = 644       # u=rw,go=r
-
-# Specify the suffix that want the man pages to have.
-
-SUFFIXMANUALS1 = 1
-SUFFIXMANUALS3 = 3
-SUFFIXMANUALS5 = 5
-
-#NETPBMLIBTYPE tells the kind of libraries that will get built to hold the
-#Netpbm library functions.  The value is used only in make file tests.
-# "unixshared" means a unix-style shared library, typically named like 
-# libxyz.so.2.3
-NETPBMLIBTYPE = unixshared
-# "unixstatic" means a unix-style static library, (like libxyz.a)
-#NETPBMLIBTYPE = unixstatic
-# "dll" means a Windows DLL shared library
-#NETPBMLIBTYPE = dll
-# "dylib" means a Darwin/Mac OS shared library
-#NETPBMLIBTYPE = dylib
-
-#NETPBMLIBSUFFIX is the suffix used on whatever kind of library is 
-#selected above.  All this is used for is to construct library names.
-#The make files never examine the actual value.
-NETPBMLIBSUFFIX = so
-# "a" is the suffix for unix-style static libraries.  Also for AIX shared
-# libraries.
-#NETPBMLIBSUFFIX = a
-# For HP-UX shared libraries:
-#NETPBMLIBSUFFIX = sl
-# Darwin/Mac OS shared library:
-#NETPBMLIBSUFFIX = dylib
-# Windows shared library:
-#NETPBMLIBSUFFIX = dll
-
-#STATICLIB_TOO is "y" to signify that you want a static library built
-#and installed in addition to whatever library type you specified by
-#NETPBMLIBTYPE.  If NETPBMLIBTYPE specified a static library,
-#STATICLIB_TOO simply has no effect.
-STATICLIB_TOO = y
-#STATICLIB_TOO = n
-
-#STATICLIBSUFFIX is the suffix that static libraries have.  It's
-#meaningless if you aren't building static libraries.
-STATICLIBSUFFIX = a
-
-#SHLIBPREFIXLIST is a blank-delimited list of prefixes that a filename
-#of a shared library may have on this system.  Traditionally, it's
-#just "lib", as in libc or libpbm.  On Windows, though, varying
-#prefixes are used when multiple alternative forms of a library are
-#available.  The first prefix in this list is what we use to name the
-#Netpbm shared libraries.
-SHLIBPREFIXLIST = lib
-#Cygwin:
-#SHLIBPREFIXLIST = cyg lib
-
-NETPBMSHLIBPREFIX = $(firstword $(SHLIBPREFIXLIST))
-
-#DLLVER is used to version the DLLs built on cygwin or other
-#windowsish platforms.  We can't add this to LIBROOT, or we'd
-#version the static libs (which is bad).  We can't add this
-#at the end of the name (like unix does with so numbers) because
-#windows will only load dlls whose name ends in "dll".  So,
-#we have this variable, which becomes the end of the library "root" name
-#for DLLs only.
-DLLVER =
-#Cygwin
-#DLLVER = $(NETPBM_MAJOR_RELEASE)
-
-#NETPBM_DOCURL is the URL of the main documentation page for Netpbm.
-#This is a directory which contains a file for each Netpbm program,
-#library, and file type.  E.g. The documentation for jpegtopnm might be in
-#http://netpbm.sourceforge.net/doc/jpegtopnm.html .  This value gets
-#installed in the man pages (which say no more than to read the webpage)
-#and in the Webman netpbm.url file.
-NETPBM_DOCURL = http://netpbm.sourceforge.net/doc/
-#For a system with no web access, but a local copy of the doc:
-#NETPBM_DOCURL = file:/usr/doc/netpbm/
-
-# This is where everything goes when you do 'make package':
-PKGDIR = /tmp/netpbm
-
-
-
-####Lines above were copied from Makefile.config.in by 'configure'.
-####Lines below were added by 'configure' based on the GNU platform.
-DEFAULT_TARGET = nonmerge
-NETPBMLIBTYPE=unixshared
-NETPBMLIBSUFFIX=so
-STATICLIB_TOO=n
-CFLAGS = -pedantic -O3 -Wall -Wno-uninitialized -Wmissing-declarations -Wimplicit -Wwrite-strings
-CFLAGS_MERGE = -Wno-missing-declarations
-TIFFLIB = libtiff.so
-JPEGLIB = libjpeg.so
-PNGLIB = libpng.so
-ZLIB = libz.so
diff --git a/media-libs/netpbm/files/10.11.12/Makefile.svga b/media-libs/netpbm/files/10.11.12/Makefile.svga
deleted file mode 100644
index 43f6c65531ff..000000000000
--- a/media-libs/netpbm/files/10.11.12/Makefile.svga
+++ /dev/null
@@ -1,478 +0,0 @@
-####This file was automatically created by 'configure.'
-####Many variables are set twice -- a generic setting, then 
-####a system-specific override at the bottom of the file.
-####
-# This is a make file inclusion, to be included in all the Netpbm make
-# files.
-
-# This file is meant to contain variable settings that customize the
-# build for a particular target system configuration.
-
-# The distribution contains the file Makefile.config.in.  You edit
-# Makefile.config.in in ways relevant to your particular environment 
-# to create Makefile.config.  The "configure" program will do this
-# for you in simple cases.
-
-# Some of the variables that the including make file must set for this
-# file to work:
-#
-#  SRCDIR: The directory at the top of the Netpbm source tree.  Note that
-#  this is typically a relative directory, and it must be relative to the
-#  make file that includes this file.  So it's normally "..".
-
-DEFAULT_TARGET = nonmerge
-#DEFAULT_TARGET = merge
-
-# Fiasco has some special requirements that make it fail to compile on
-# some systems, and since it isn't very important, just set this to "N"
-# and skip it on those systems unless you want to debug it and fix it.
-# OpenBSD:
-#BUILD_FIASCO = N
-BUILD_FIASCO = Y
-
-# The following are commands for the build process to use.  These values
-# do not get built into anything.
-
-# The C compiler (including macro preprocessor)
-#CC = gcc
-# Note that 'cc' is usually an alias for whatever is the main compiler
-# on a system, e.g. the GNU Compiler on Linux.
-CC = cc
-
-# The linker.
-LD = $(CC)
-#LD = ld
-#Tru64:
-#LD = cc
-#LD = gcc 
-
-# CC and LD are for building the Netpbm programs, which are not necessarily
-# intended to run on the same system on which Make is running.  But when we 
-# build a build tool such as Libopt, it is meant to run only on the same 
-# system on which the Make is running.  The variables below define programs
-# to use to compile and link build tools.
-CC_FOR_BUILD = $(CC)
-LD_FOR_BUILD = $(LD)
-
-# MAKE is set automatically by Make to what was used to invoke Make.
-
-INSTALL = $(SRCDIR)/buildtools/install.sh
-#Solaris:
-#INSTALL = /usr/ucb/install
-#Tru64:
-#INSTALL = installbsd
-#OSF1:
-#INSTALL = $(SRCDIR)/buildtools/installosf
-#Red Hat Linux:
-#INSTALL = install
-
-# STRIPFLAG is the option you pass to the above install program to make it
-# strip unnecessary information out of binaries.
-STRIPFLAG = -s
-# If you don't want to strip the binaries, just leave it null:
-#STRIPFLAG = 
-
-SYMLINK = ln -s
-# At least some Windows environments don't have any concept of symbolic
-# links, but direct copies are usually a passable alternative.
-#SYMLINK = cp
-
-#MANPAGE_FORMAT is "nroff" or "cat".  It determines in what format the
-#pointer man pages are installed (ready to nroff, or ready to cat).  
-#A pointer man pages is just a single-paragraph pages that tells you there is
-#no man page for the program, to look at the HTML documentation instead.
-MANPAGE_FORMAT = nroff
-#MANPAGE_FORMAT = cat
-
-AR = ar
-RANLIB = ranlib
-# IRIX, SCO don't have Ranlib:
-#RANLIB = true
-LEX = flex
-# Solaris:
-# LEX = flex -e
-# Or just skip parts that need Lex:
-# LEX =
-
-# C compiler options 
-
-# gcc:
-# -ansi and -Werror should work too, but are not included
-# by default because there's no point in daring the build to fail.
-# -pedantic isn't a problem because it causes at worst a warning.
-#CFLAGS = -pedantic -O3 -Wall -Wno-uninitialized -Wmissing-declarations
-# The merged programs have a main_XXX subroutine instead of main(),
-# which would cause a warning with -Wmissing-declarations
-#CFLAGS_MERGE = -Wno-missing-declarations
-# On DEC Tru64 4.0F (at least), you need -DLONG_32 for ppmtompeg.
-#Tru64:
-#CFLAGS = -O2 -std1 -DLONG_32
-#AIX:
-#CFLAGS= -O3 -D_ALL_SOURCE
-#HP-UX:
-#CFLAGS= -O3 -fPIC
-
-
-# EXE is a suffix that the linker puts on any executable it generates.
-# In cygwin, this is .exe and most programs deal with its existence without
-# us having to know about it.  Some don't though, so set this:
-
-EXE =
-#Cygwin, DJGPP/Windows:
-#EXE = .exe
-  
-# linker options.  
-
-# On some systems you have to build into an executable the list of
-# directories where its dynamically linked libraries can be found at
-# run time.  This is typically done with a -R or --rpath linker
-# option.  Even on systems that don't require it, you might prefer to do
-# that rather than set up environment variables or configuration files
-# to tell the system where the libraries are.  A "Y" here means to put
-# the directory information in the executable at link time.
-
-NEED_RUNTIME_PATH = N
-# Solaris, SunOS, NetBSD:
-#NEED_RUNTIME_PATH = Y
-
-LDFLAGS =
-# Eunice users may want to use -noshare so that the executables can
-# run standalone:
-#LDFLAGS = -noshare
-#Tru64:
-# Russ Allberry says on 2001.06.09 that -oldstyle_liblookup may be necessary
-# to keep from finding an ancient system libjpeg.so that isn't compatible with
-# NetPBM.  Michael Long found that /usr/local/lib is not in the default
-# search path, or not soon enough, and he was getting an old libjpeg that
-# caused all the jpeg symbol references to be unresolved.  He had installed
-# a new libjpeg in /usr/local/lib.
-#LDFLAGS = -call_shared -oldstyle_liblookup -L/usr/local/lib
-#AIX:
-#LDFLAGS=-L /usr/pubsw/lib
-#HP-UX:
-#LDFLAGS = -Wl,+b,/usr/pubsw/lib
-#FreeBSD:
-#LDFLAGS = -L/usr/local/lib
-
-# Linker options for created Netpbm shared libraries.
-
-# Here, $(SONAME) resolves to the soname for the shared library being created.
-# The following are gcc options.  This works on GNU libc systems.
-LDSHLIB = -shared -Wl,-soname,$(SONAME)
-# You need -nostart instead of -shared on BeOS.  Though the BeOS compiler is
-# ostensibly gcc, it has the -nostart option, which is not mentioned in gcc
-# documentation and doesn't exist in at least one non-BeOS installation.
-# BeOS doesn't have sonames built in.
-#LDSHLIB = -nostart
-#LDSHLIB = -G
-# Solaris, SunOS with GNU Ld, SCO:
-# These systems have no soname option.
-#LDSHLIB = -shared
-# Solaris with Sun Ld:
-#LDSHLIB = -Wl,-Bdynamic,-G,-h,$(SONAME) 
-#Tru64:
-#LDSHLIB = -shared -expect_unresolved "*"
-#AIX:
-#LDSHLIB = ???
-
-# On older systems, you have to make shared libraries out of position
-# independent code, so you need -fpic or fPIC here.  (The rule is: if
-# -fpic works, use it.  If it bombs, go to fPIC).  On newer systems,
-# it isn't necessary, but can save real memory at the expense of
-# execution speed.  Without position independent code, the library
-# loader may have to patch addresses into the executable text.  On an
-# older system, this would cause a program crash because the loader
-# would be writing into read-only shared memory.  But on newer
-# systems, the system silently creates a private mapping of the page
-# or segment being modified (the "copy on write" phenomenon).  So it
-# needs its own private real page frame.  In one experiment, A second
-# copy of Pbmtext used 16K less real memory when built with -fpic than
-# when built without.  2001.06.02.
-
-CFLAGS_SHLIB = 
-# Solaris or SunOS with gcc, and NetBSD:
-#CFLAGS_SHLIB = -fpic
-#CFLAGS_SHLIB = -fPIC
-# Sun compiler:
-#CFLAGS_SHLIB = -Kpic
-#CFLAGS_SHLIB = -KPIC
-
-# SHLIB_CLIB is the link option to include the C library in a shared library,
-# normally "-lc".  On typical systems, this serves no purpose.  On some,
-# though, it causes information about which C library to use to be recorded
-# in the shared library and thus choose the correct library among several or
-# avoid using an incompatible one.  But on some systems, the link fails.
-# On 2002.09.30, "John H. DuBois III" <spcecdt@armory.com> reports that on 
-# SCO OpenServer, he gets the following error message with -lc:
-#
-#  -lc; relocations referenced  ;  from file(s) /usr/ccs/lib/libc.so(random.o);
-#   fatal error: relocations remain against allocatable but non-writable 
-#   section: ; .text
-
-SHLIB_CLIB = -lc
-# SCO:
-SHLIB_CLIB =
-
-# The following variables tell where your various libraries on which
-# Netpbm depends live.  The LIBxxx variable is a full file
-# specification of the link library (not necessarily the library used
-# at run time).  e.g. "/usr/local/lib/graphics/libpng.so".  It usually
-# doesn't matter if the library prefix and suffix are right -- you can
-# use "lib" and ".so" or ".a" regardless of what your system actually
-# uses because these just turn into "-L" and "-l" linker options
-# anyway.  ".a" implies a static library for some purposes, though.
-# If you don't have the library in question, use a value of NONE for
-# LIBxxx and the build will simply skip the programs that require that
-# library.  If the library is in your linker's (or the Netpbm build's)
-# default search path, leave off the directory part, e.g. "libpng.so".
-
-# The xxxHDR_DIR variable is the directory in which the interface
-# headers for the library live (e.g. /usr/include).  If they are in your
-# compiler's default search path, set this variable to null.
-
-# This is where the Netpbm shared libraries will reside when Netpbm is
-# fully installed.  In some configurations, the Netpbm builder builds
-# this information into the Netpbm executables.  This does NOT affect
-# where the Netpbm installer installs the libraries.  A null value
-# means the libraries are in a default search path used by the runtime
-# library loader.
-NETPBMLIB_RUNTIME_PATH = 
-#NETPBMLIB_RUNTIME_PATH = /usr/lib/netpbm
-
-# The TIFF library.  See above.  If you want to build the tiff
-# converters, you must have the tiff library already installed.
-
-TIFFLIB = NONE
-TIFFHDR_DIR =
-
-#TIFFLIB = libtiff.so
-#TIFFHDR_DIR = /usr/include/libtiff
-#NetBSD:
-#TIFFLIB = $(LOCALBASE)/lib/libtiff.so
-#TIFFHDR_DIR = $(LOCALBASE)/include
-# OSF, Tru64:
-#TIFFLIB = /usr/local1/DEC/lib/libtiff.so
-#TIFFHDR_DIR = /usr/local1/DEC/include
-
-# If your Tiff library depends on libraries other than libc and libm, 
-# put the required linker options here.
-TIFFLIB_LDFLAGS =
-# John Milton <jmilton@fundsxpress.com> in September 2000 and
-# John Bartelt <bartelt@SLAC.Stanford.EDU> in August 2002 reported
-# needing libz with libtiff 3.5.5 (with and without LZW patch):
-#TIFFLIB_LDFLAGS = -lz
-
-# The JPEG library.  See above.  If you want to build the jpeg
-# converters you must have the jpeg library already installed.
-
-# Tiff files can use JPEG compression, so the Tiff library can reference
-# the JPEG library.  If your Tiff library references a dynamic JPEG 
-# library, you must specify at least JPEGLIB here, or the Tiff
-# converters will not build.  Note that your Tiff library may have the
-# JPEG stuff statically linked in, in which case you won't need 
-# JPEGLIB in order to build the Tiff converters.
-
-JPEGLIB = NONE
-JPEGHDR_DIR =
-#JPEGLIB = libjpeg.so
-#JPEGHDR_DIR = /usr/include/jpeg
-# Netbsd:
-#JPEGLIB = ${LOCALBASE}/lib/libjpeg.so
-#JPEGHDR_DIR = ${LOCALBASE}/include
-# OSF, Tru64:
-#JPEGLIB = /usr/local1/DEC/libjpeg.so
-#JPEGHDR_DIR = /usr/local1/DEC/include
-# Typical:
-#JPEGLIB = /usr/local/lib/libjpeg.so
-#JPEGHDR_DIR = /usr/local/include
-# Don't build JPEG stuff:
-#JPEGLIB = NONE
-
-
-# The PNG library.  See above.  If you want to build the PNG
-# converters you must have the PNG library already installed.
-
-# The PNG library, by convention starting around April 2002, gets installed
-# with names that include a version number, such as libpng10.a and header
-# files in /usr/include/libpng10.
-# option.
-PNGLIB = NONE
-PNGVER = 
-#PNGLIB = libpng$(PNGVER).so
-#PNGHDR_DIR = /usr/include/libpng$(PNGVER)
-# NetBSD:
-#PNGLIB = $(LOCALBASE)/lib/libpng$(PNGVER).so
-#PNGHDR_DIR = $(LOCALBASE)/include
-# OSF/Tru64:
-#PNGLIB = /usr/local1/DEC/lib/libpng$(PNGVER).so
-#PNGHDR_DIR = /usr/local1/DEC/include
-
-# The zlib compression library.  See above.  You need it to build
-# anything that needs the PNG library (see above).  If you selected
-# NONE for the PNG library, it doesn't matter what you specify here --
-# it won't get used.
-
-ZLIB = NONE
-ZHDR_DIR = 
-#ZLIB = libz.so
-
-# The JBIG lossless image compression library (aka JBIG-KIT):
-
-JBIGLIB = $(BUILDDIR)/converter/other/jbig/libjbig.a
-JBIGHDR_DIR = $(SRCDIR)/converter/other/jbig
-
-# The Jasper JPEG-2000 image compression library (aka JasPer):
-JASPERLIB = $(INTERNAL_JASPERLIB)
-JASPERHDR_DIR = $(INTERNAL_JASPERHDR_DIR)
-
-# And the Utah Raster Toolkit (aka URT aka RLE) library:
-
-URTLIB = $(BUILDDIR)/urt/librle.a
-URTHDR_DIR = $(SRCDIR)/urt
-
-# The Linux SVGA library (Svgalib) is a facility for displaying graphics
-# on the Linux console.  It is required by Ppmsvgalib.
-
-LINUXSVGALIB = NONE
-LINUXSVGAHDR_DIR = 
-
-#LINUXSVGALIB_DIR = 
-#LINUXSVGAHDR_DIR = /usr/include/vgalib
-
-# These are -l options to link in the network libraries.  Often, these are
-# built into the standard C library, so this can be null.  If you don't 
-# want any network functions, make it NONE.  The only thing that requires
-# network functions is the option in ppmtompeg to run it on multiple
-# computers simultaneously.
-
-NETWORKLD = 
-# Solaris, SunOS:
-#NETWORKLD = -lsocket -lnsl
-# SCO:
-#NETWORKLD = -lsocket, -lresolv
-# Don't build network functions:
-#DJGPP/Windows, Tru64:
-#   (there's some minor header problem that prevents network functions from 
-#   building on Tru64 2000.10.06)
-#NETWORKLD = NONE
-
-VMS = 
-#VMS:
-#VMS = yes
-
-# The following variables are used only by 'make install' (and the
-# variants of it).  Paths here don't, for example, get built into any
-# programs.
-
-# File permissions for installed files.
-# Note that on some systems (e.g. Solaris), 'install' can't use the 
-# mnemonic permissions - you have to use octal.
-
-# binaries (pbmmake, etc)
-INSTALL_PERM_BIN =  755       # u=rwx,go=rx
-# shared libraries (libpbm.so, etc)
-INSTALL_PERM_LIBD = 755       # u=rwx,go=rx
-# static libraries (libpbm.a, etc)
-INSTALL_PERM_LIBS = 644       # u=rw,go=r
-# header files (pbm.h, etc)
-INSTALL_PERM_HDR =  644       # u=rw,go=r
-# man pages (pbmmake.1, etc)
-INSTALL_PERM_MAN =  644       # u=rw,go=r
-# data files (pnmtopalm color maps, etc)
-INSTALL_PERM_DATA = 644       # u=rw,go=r
-
-# Specify the suffix that want the man pages to have.
-
-SUFFIXMANUALS1 = 1
-SUFFIXMANUALS3 = 3
-SUFFIXMANUALS5 = 5
-
-#NETPBMLIBTYPE tells the kind of libraries that will get built to hold the
-#Netpbm library functions.  The value is used only in make file tests.
-# "unixshared" means a unix-style shared library, typically named like 
-# libxyz.so.2.3
-NETPBMLIBTYPE = unixshared
-# "unixstatic" means a unix-style static library, (like libxyz.a)
-#NETPBMLIBTYPE = unixstatic
-# "dll" means a Windows DLL shared library
-#NETPBMLIBTYPE = dll
-# "dylib" means a Darwin/Mac OS shared library
-#NETPBMLIBTYPE = dylib
-
-#NETPBMLIBSUFFIX is the suffix used on whatever kind of library is 
-#selected above.  All this is used for is to construct library names.
-#The make files never examine the actual value.
-NETPBMLIBSUFFIX = so
-# "a" is the suffix for unix-style static libraries.  Also for AIX shared
-# libraries.
-#NETPBMLIBSUFFIX = a
-# For HP-UX shared libraries:
-#NETPBMLIBSUFFIX = sl
-# Darwin/Mac OS shared library:
-#NETPBMLIBSUFFIX = dylib
-# Windows shared library:
-#NETPBMLIBSUFFIX = dll
-
-#STATICLIB_TOO is "y" to signify that you want a static library built
-#and installed in addition to whatever library type you specified by
-#NETPBMLIBTYPE.  If NETPBMLIBTYPE specified a static library,
-#STATICLIB_TOO simply has no effect.
-STATICLIB_TOO = y
-#STATICLIB_TOO = n
-
-#STATICLIBSUFFIX is the suffix that static libraries have.  It's
-#meaningless if you aren't building static libraries.
-STATICLIBSUFFIX = a
-
-#SHLIBPREFIXLIST is a blank-delimited list of prefixes that a filename
-#of a shared library may have on this system.  Traditionally, it's
-#just "lib", as in libc or libpbm.  On Windows, though, varying
-#prefixes are used when multiple alternative forms of a library are
-#available.  The first prefix in this list is what we use to name the
-#Netpbm shared libraries.
-SHLIBPREFIXLIST = lib
-#Cygwin:
-#SHLIBPREFIXLIST = cyg lib
-
-NETPBMSHLIBPREFIX = $(firstword $(SHLIBPREFIXLIST))
-
-#DLLVER is used to version the DLLs built on cygwin or other
-#windowsish platforms.  We can't add this to LIBROOT, or we'd
-#version the static libs (which is bad).  We can't add this
-#at the end of the name (like unix does with so numbers) because
-#windows will only load dlls whose name ends in "dll".  So,
-#we have this variable, which becomes the end of the library "root" name
-#for DLLs only.
-DLLVER =
-#Cygwin
-#DLLVER = $(NETPBM_MAJOR_RELEASE)
-
-#NETPBM_DOCURL is the URL of the main documentation page for Netpbm.
-#This is a directory which contains a file for each Netpbm program,
-#library, and file type.  E.g. The documentation for jpegtopnm might be in
-#http://netpbm.sourceforge.net/doc/jpegtopnm.html .  This value gets
-#installed in the man pages (which say no more than to read the webpage)
-#and in the Webman netpbm.url file.
-NETPBM_DOCURL = http://netpbm.sourceforge.net/doc/
-#For a system with no web access, but a local copy of the doc:
-#NETPBM_DOCURL = file:/usr/doc/netpbm/
-
-# This is where everything goes when you do 'make package':
-PKGDIR = /tmp/netpbm
-
-
-
-####Lines above were copied from Makefile.config.in by 'configure'.
-####Lines below were added by 'configure' based on the GNU platform.
-DEFAULT_TARGET = nonmerge
-NETPBMLIBTYPE=unixshared
-NETPBMLIBSUFFIX=so
-STATICLIB_TOO=n
-CFLAGS = -pedantic -O3 -Wall -Wno-uninitialized -Wmissing-declarations -Wimplicit -Wwrite-strings
-CFLAGS_MERGE = -Wno-missing-declarations
-TIFFLIB = libtiff.so
-JPEGLIB = libjpeg.so
-PNGLIB = libpng.so
-ZLIB = libz.so
-LINUXSVGAHDR_DIR = /usr/include
-LINUXSVGALIB = /usr/lib/libvga.so
diff --git a/media-libs/netpbm/files/digest-netpbm-10.11.10-r1 b/media-libs/netpbm/files/digest-netpbm-10.11.10-r1
deleted file mode 100644
index 64e407cb767d..000000000000
--- a/media-libs/netpbm/files/digest-netpbm-10.11.10-r1
+++ /dev/null
@@ -1 +0,0 @@
-MD5 4c057801d3c5bd116fda88a57cedb057 netpbm-10.11.10.tgz 1911573
diff --git a/media-libs/netpbm/files/digest-netpbm-10.11.12 b/media-libs/netpbm/files/digest-netpbm-10.11.12
deleted file mode 100644
index 9fe845efc6ca..000000000000
--- a/media-libs/netpbm/files/digest-netpbm-10.11.12
+++ /dev/null
@@ -1 +0,0 @@
-MD5 6f1bc0685bfb1a70d596ba09bf64b978 netpbm-10.11.12.tgz 1881470
diff --git a/media-libs/netpbm/files/digest-netpbm-10.11.13 b/media-libs/netpbm/files/digest-netpbm-10.11.13
deleted file mode 100644
index 4d7e9e99e06e..000000000000
--- a/media-libs/netpbm/files/digest-netpbm-10.11.13
+++ /dev/null
@@ -1 +0,0 @@
-MD5 4d14201a3e200e63d2594786bf781e94 netpbm-10.11.13.tgz 1882463
diff --git a/media-libs/netpbm/netpbm-10.11.10-r1.ebuild b/media-libs/netpbm/netpbm-10.11.10-r1.ebuild
deleted file mode 100644
index 63a8ae2cef1a..000000000000
--- a/media-libs/netpbm/netpbm-10.11.10-r1.ebuild
+++ /dev/null
@@ -1,69 +0,0 @@
-# Copyright 1999-2003 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/media-libs/netpbm/netpbm-10.11.10-r1.ebuild,v 1.1 2003/08/23 23:22:05 mholzer Exp $
-
-IUSE="svga"
-
-inherit flag-o-matic
-
-DESCRIPTION="A set of utilities for converting to/from the netpbm (and related) formats"
-SRC_URI="mirror://sourceforge/${PN}/${P}.tgz"
-HOMEPAGE="http://netpbm.sourceforge.net/"
-
-DEPEND=">=media-libs/jpeg-6b
-	>=media-libs/tiff-3.5.5
-	>=media-libs/libpng-1.2.1
-	svga? ( media-libs/svgalib )"
-
-SLOT="0"
-LICENSE="GPL-2"
-KEYWORDS="~x86 ~ppc ~sparc ~alpha ~mips ~hppa ~arm ~amd64"
-
-src_unpack() {
-	unpack ${A}
-	cd ${S}
-
-	if [ "${ARCH}" != "x86" ] ; then
-			cfg="config"
-	else
-		if [ -n "`use svga`" ]
-		then
-			cfg="svga"
-		else
-			cfg="config"
-		fi
-	fi
-
-	# Sparc support ...
-	replace-flags "-mcpu=ultrasparc" "-mcpu=v8 -mtune=ultrasparc"
-	replace-flags "-mcpu=v9" "-mcpu=v8 -mtune=v9"
-
-	sed -e "s:-O3:${CFLAGS} -fPIC:" ${FILESDIR}/${PV}/Makefile.${cfg} \
-		> Makefile.config || die "Flag replacement failed"
-}
-
-src_compile() {
-	MAKEOPTS="${MAKEOPTS} -j1"
-	emake CC="${CC}" CXX="${CXX}"|| die "emake failed"
-}
-
-src_install () {
-	make package pkgdir=${D}/usr/ || die "make package failed"
-
-	# Fix symlink not being created.
-	dosym `basename ${D}/usr/lib/libnetpbm.so.*` /usr/lib/libnetpbm.so
-
-	dodir /usr/share
-	rm -rf ${D}/usr/bin/doc.url
-	rm -rf ${D}/usr/man/web
-	rm -rf ${D}/usr/link
-	rm -rf ${D}/usr/README
-	rm -rf ${D}/usr/pkginfo
-	mv ${D}/usr/man/ ${D}/usr/share/man
-
-	dodoc README
-	export GLOBIGNORE='*.html:.*'
-	cd doc && \
-		dodoc * && \
-		dohtml -r . || die "doc install failed"
-}
diff --git a/media-libs/netpbm/netpbm-10.11.12.ebuild b/media-libs/netpbm/netpbm-10.11.12.ebuild
deleted file mode 100644
index 544ab92b93e8..000000000000
--- a/media-libs/netpbm/netpbm-10.11.12.ebuild
+++ /dev/null
@@ -1,69 +0,0 @@
-# Copyright 1999-2003 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/media-libs/netpbm/netpbm-10.11.12.ebuild,v 1.1 2003/09/07 12:13:26 mholzer Exp $
-
-IUSE="svga"
-
-inherit flag-o-matic
-
-DESCRIPTION="A set of utilities for converting to/from the netpbm (and related) formats"
-SRC_URI="mirror://sourceforge/${PN}/${P}.tgz"
-HOMEPAGE="http://netpbm.sourceforge.net/"
-
-DEPEND=">=media-libs/jpeg-6b
-	>=media-libs/tiff-3.5.5
-	>=media-libs/libpng-1.2.1
-	svga? ( media-libs/svgalib )"
-
-SLOT="0"
-LICENSE="GPL-2"
-KEYWORDS="~x86 ~ppc ~sparc ~alpha ~mips ~hppa ~arm ~amd64"
-
-src_unpack() {
-	unpack ${A}
-	cd ${S}
-
-	if [ "${ARCH}" != "x86" ] ; then
-			cfg="config"
-	else
-		if [ -n "`use svga`" ]
-		then
-			cfg="svga"
-		else
-			cfg="config"
-		fi
-	fi
-
-	# Sparc support ...
-	replace-flags "-mcpu=ultrasparc" "-mcpu=v8 -mtune=ultrasparc"
-	replace-flags "-mcpu=v9" "-mcpu=v8 -mtune=v9"
-
-	sed -e "s:-O3:${CFLAGS} -fPIC:" ${FILESDIR}/${PV}/Makefile.${cfg} \
-		> Makefile.config || die "Flag replacement failed"
-}
-
-src_compile() {
-	MAKEOPTS="${MAKEOPTS} -j1"
-	emake CC="${CC}" CXX="${CXX}"|| die "emake failed"
-}
-
-src_install () {
-	make package pkgdir=${D}/usr/ || die "make package failed"
-
-	# Fix symlink not being created.
-	dosym `basename ${D}/usr/lib/libnetpbm.so.*` /usr/lib/libnetpbm.so
-
-	dodir /usr/share
-	rm -rf ${D}/usr/bin/doc.url
-	rm -rf ${D}/usr/man/web
-	rm -rf ${D}/usr/link
-	rm -rf ${D}/usr/README
-	rm -rf ${D}/usr/pkginfo
-	mv ${D}/usr/man/ ${D}/usr/share/man
-
-	dodoc README
-	export GLOBIGNORE='*.html:.*'
-	cd doc && \
-		dodoc * && \
-		dohtml -r . || die "doc install failed"
-}
diff --git a/media-libs/netpbm/netpbm-10.11.13.ebuild b/media-libs/netpbm/netpbm-10.11.13.ebuild
deleted file mode 100644
index fdced5ed8a5a..000000000000
--- a/media-libs/netpbm/netpbm-10.11.13.ebuild
+++ /dev/null
@@ -1,69 +0,0 @@
-# Copyright 1999-2003 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/media-libs/netpbm/netpbm-10.11.13.ebuild,v 1.2 2003/09/22 00:31:52 zhen Exp $
-
-IUSE="svga"
-
-inherit flag-o-matic
-
-DESCRIPTION="A set of utilities for converting to/from the netpbm (and related) formats"
-SRC_URI="mirror://sourceforge/${PN}/${P}.tgz"
-HOMEPAGE="http://netpbm.sourceforge.net/"
-
-DEPEND=">=media-libs/jpeg-6b
-	>=media-libs/tiff-3.5.5
-	>=media-libs/libpng-1.2.1
-	x86? ( svga? ( media-libs/svgalib ) )"
-
-SLOT="0"
-LICENSE="GPL-2"
-KEYWORDS="~x86 ~ppc ~sparc ~alpha ~mips ~hppa ~arm ~amd64"
-
-src_unpack() {
-	unpack ${A}
-	cd ${S}
-
-	if [ "${ARCH}" != "x86" ] ; then
-			cfg="config"
-	else
-		if [ -n "`use svga`" ]
-		then
-			cfg="svga"
-		else
-			cfg="config"
-		fi
-	fi
-
-	# Sparc support ...
-	replace-flags "-mcpu=ultrasparc" "-mcpu=v8 -mtune=ultrasparc"
-	replace-flags "-mcpu=v9" "-mcpu=v8 -mtune=v9"
-
-	sed -e "s:-O3:${CFLAGS} -fPIC:" ${FILESDIR}/${PV}/Makefile.${cfg} \
-		> Makefile.config || die "Flag replacement failed"
-}
-
-src_compile() {
-	MAKEOPTS="${MAKEOPTS} -j1"
-	emake CC="${CC}" CXX="${CXX}"|| die "emake failed"
-}
-
-src_install () {
-	make package pkgdir=${D}/usr/ || die "make package failed"
-
-	# Fix symlink not being created.
-	dosym `basename ${D}/usr/lib/libnetpbm.so.*` /usr/lib/libnetpbm.so
-
-	dodir /usr/share
-	rm -rf ${D}/usr/bin/doc.url
-	rm -rf ${D}/usr/man/web
-	rm -rf ${D}/usr/link
-	rm -rf ${D}/usr/README
-	rm -rf ${D}/usr/pkginfo
-	mv ${D}/usr/man/ ${D}/usr/share/man
-
-	dodoc README
-	export GLOBIGNORE='*.html:.*'
-	cd doc && \
-		dodoc * && \
-		dohtml -r . || die "doc install failed"
-}