Remove old versions of python.

(Portage version: 2.2.7/cvs/Linux x86_64, signed Manifest commit with key 30380381)

17 files changed, 9 insertions, 5381 deletions

diff --git a/dev-lang/python/ChangeLog b/dev-lang/python/ChangeLog
index 9d165e1ae7ff..ef979d7f9fde 100644
--- a/dev-lang/python/ChangeLog
+++ b/dev-lang/python/ChangeLog
@@ -1,6 +1,14 @@
 # ChangeLog for dev-lang/python
 # Copyright 1999-2013 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/ChangeLog,v 1.708 2013/09/26 19:17:17 floppym Exp $
+# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/ChangeLog,v 1.709 2013/10/10 08:06:30 djc Exp $
+
+  10 Oct 2013; Dirkjan Ochtman <djc@gentoo.org> -files/python-3.2.3-x32.patch,
+  -python-2.6.8-r1.ebuild, -python-2.6.8-r2.ebuild, -python-2.7.3-r2.ebuild,
+  -python-2.7.3-r3.ebuild, -python-2.7.5-r1.ebuild, -python-2.7.5.ebuild,
+  -python-3.2.3-r1.ebuild, -python-3.2.3-r2.ebuild, -python-3.2.3.ebuild,
+  -python-3.2.4.ebuild, -python-3.2.5-r1.ebuild, -python-3.2.5.ebuild,
+  -python-3.3.1.ebuild, -python-3.3.2-r1.ebuild, -python-3.3.2.ebuild:
+  Remove old versions of python.
 
   26 Sep 2013; Mike Gilbert <floppym@gentoo.org>
   +files/python-2.7.5-nonfatal-compileall.patch, python-2.7.5-r2.ebuild:
diff --git a/dev-lang/python/files/python-3.2.3-x32.patch b/dev-lang/python/files/python-3.2.3-x32.patch
deleted file mode 100644
index 42262a28803a..000000000000
--- a/dev-lang/python/files/python-3.2.3-x32.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-http://bugs.python.org/issue15000
-
-x32 has 64bit values for the first two args
-
---- a/Modules/_posixsubprocess.c
-+++ b/Modules/_posixsubprocess.c
-@@ -175,8 +175,13 @@
-  * chooses to break compatibility with all existing binaries.  Highly Unlikely.
-  */
- struct linux_dirent {
-+#if defined(__x86_64__) && defined(__ILP32__)
-+   unsigned long long d_ino;
-+   unsigned long long d_off;
-+#else
-    unsigned long  d_ino;        /* Inode number */
-    unsigned long  d_off;        /* Offset to next linux_dirent */
-+#endif
-    unsigned short d_reclen;     /* Length of this linux_dirent */
-    char           d_name[256];  /* Filename (null-terminated) */
- };
diff --git a/dev-lang/python/python-2.6.8-r1.ebuild b/dev-lang/python/python-2.6.8-r1.ebuild
deleted file mode 100644
index 75fe4f8eccaa..000000000000
--- a/dev-lang/python/python-2.6.8-r1.ebuild
+++ /dev/null
@@ -1,364 +0,0 @@
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/python-2.6.8-r1.ebuild,v 1.22 2013/06/30 03:36:01 floppym Exp $
-
-EAPI="2"
-WANT_AUTOMAKE="none"
-WANT_LIBTOOL="none"
-
-inherit autotools eutils flag-o-matic multilib pax-utils python-utils-r1 toolchain-funcs multiprocessing
-
-MY_P="Python-${PV}"
-PATCHSET_REVISION="0"
-
-DESCRIPTION="An interpreted, interactive, object-oriented programming language"
-HOMEPAGE="http://www.python.org/"
-SRC_URI="http://www.python.org/ftp/python/${PV}/${MY_P}.tar.bz2
-	mirror://gentoo/python-gentoo-patches-${PV}-${PATCHSET_REVISION}.tar.bz2"
-
-LICENSE="PSF-2"
-SLOT="2.6"
-KEYWORDS="alpha amd64 arm hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc x86 ~sparc-fbsd ~x86-fbsd"
-IUSE="-berkdb build doc elibc_uclibc examples gdbm hardened ipv6 +ncurses +readline sqlite +ssl +threads tk +wide-unicode wininst +xml"
-
-# Do not add a dependency on dev-lang/python to this ebuild.
-# If you need to apply a patch which requires python for bootstrapping, please
-# run the bootstrap code on your dev box and include the results in the
-# patchset. See bug 447752.
-
-RDEPEND="app-arch/bzip2
-	>=sys-libs/zlib-1.1.3
-	virtual/libffi
-	virtual/libintl
-	!build? (
-		berkdb? ( || (
-			sys-libs/db:4.7
-			sys-libs/db:4.6
-			sys-libs/db:4.5
-			sys-libs/db:4.4
-			sys-libs/db:4.3
-			sys-libs/db:4.2
-		) )
-		gdbm? ( sys-libs/gdbm[berkdb] )
-		ncurses? (
-			>=sys-libs/ncurses-5.2
-			readline? ( >=sys-libs/readline-4.1 )
-		)
-		sqlite? ( >=dev-db/sqlite-3.3.3:3 )
-		ssl? ( dev-libs/openssl )
-		tk? (
-			>=dev-lang/tk-8.0
-			<dev-lang/tk-8.6
-			dev-tcltk/blt
-		)
-		xml? ( >=dev-libs/expat-2.1 )
-	)
-	!!<sys-apps/portage-2.1.9"
-DEPEND="${RDEPEND}
-	virtual/pkgconfig
-	>=sys-devel/autoconf-2.61
-	!sys-devel/gcc[libffi]"
-RDEPEND+=" !build? ( app-misc/mime-types )
-	doc? ( dev-python/python-docs:${SLOT} )"
-PDEPEND="app-admin/eselect-python
-	app-admin/python-updater"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
-	if use berkdb; then
-		ewarn "'bsddb' module is out-of-date and no longer maintained inside"
-		ewarn "dev-lang/python. 'bsddb' and 'dbhash' modules have been additionally"
-		ewarn "removed in Python 3. A maintained alternative of 'bsddb3' module"
-		ewarn "is provided by dev-python/bsddb3."
-	else
-		if has_version "=${CATEGORY}/${PN}-${PV%%.*}*[berkdb]"; then
-			ewarn "You are migrating from =${CATEGORY}/${PN}-${PV%%.*}*[berkdb]"
-			ewarn "to =${CATEGORY}/${PN}-${PV%%.*}*[-berkdb]."
-			ewarn "You might need to migrate your databases."
-		fi
-	fi
-}
-
-src_prepare() {
-	# Ensure that internal copies of expat, libffi and zlib are not used.
-	rm -fr Modules/expat
-	rm -fr Modules/_ctypes/libffi*
-	rm -fr Modules/zlib
-
-	local excluded_patches
-	if ! tc-is-cross-compiler; then
-		excluded_patches="*_all_crosscompile.patch"
-	fi
-
-	EPATCH_EXCLUDE="${excluded_patches}" EPATCH_SUFFIX="patch" \
-		epatch "${WORKDIR}/${PV}-${PATCHSET_REVISION}"
-
-	sed -i -e "s:@@GENTOO_LIBDIR@@:$(get_libdir):g" \
-		Lib/distutils/command/install.py \
-		Lib/distutils/sysconfig.py \
-		Lib/site.py \
-		Makefile.pre.in \
-		Modules/Setup.dist \
-		Modules/getpath.c \
-		setup.py || die "sed failed to replace @@GENTOO_LIBDIR@@"
-
-	epatch_user
-
-	eautoconf
-	eautoheader
-}
-
-src_configure() {
-	if use build; then
-		# Disable extraneous modules with extra dependencies.
-		export PYTHON_DISABLE_MODULES="dbm _bsddb gdbm _curses _curses_panel readline _sqlite3 _tkinter _elementtree pyexpat"
-		export PYTHON_DISABLE_SSL="1"
-	else
-		# dbm module can be linked against berkdb or gdbm.
-		# Defaults to gdbm when both are enabled, #204343.
-		local disable
-		use berkdb   || use gdbm || disable+=" dbm"
-		use berkdb   || disable+=" _bsddb"
-		use gdbm     || disable+=" gdbm"
-		use ncurses  || disable+=" _curses _curses_panel"
-		use readline || disable+=" readline"
-		use sqlite   || disable+=" _sqlite3"
-		use ssl      || export PYTHON_DISABLE_SSL="1"
-		use tk       || disable+=" _tkinter"
-		use xml      || disable+=" _elementtree pyexpat" # _elementtree uses pyexpat.
-		export PYTHON_DISABLE_MODULES="${disable}"
-
-		if ! use xml; then
-			ewarn "You have configured Python without XML support."
-			ewarn "This is NOT a recommended configuration as you"
-			ewarn "may face problems parsing any XML documents."
-		fi
-	fi
-
-	if [[ -n "${PYTHON_DISABLE_MODULES}" ]]; then
-		einfo "Disabled modules: ${PYTHON_DISABLE_MODULES}"
-	fi
-
-	if [[ "$(gcc-major-version)" -ge 4 ]]; then
-		append-flags -fwrapv
-	fi
-
-	filter-flags -malign-double
-
-	[[ "${ARCH}" == "alpha" ]] && append-flags -fPIC
-
-	# https://bugs.gentoo.org/show_bug.cgi?id=50309
-	if is-flagq -O3; then
-		is-flagq -fstack-protector-all && replace-flags -O3 -O2
-		use hardened && replace-flags -O3 -O2
-	fi
-
-	# Run the configure scripts in parallel.
-	multijob_init
-
-	mkdir -p "${WORKDIR}"/{${CBUILD},${CHOST}}
-
-	if tc-is-cross-compiler; then
-		(
-		multijob_child_init
-		cd "${WORKDIR}"/${CBUILD} >/dev/null
-		OPT="-O1" CFLAGS="" CPPFLAGS="" LDFLAGS="" CC="" \
-		"${S}"/configure \
-			--{build,host}=${CBUILD} \
-			|| die "cross-configure failed"
-		) &
-		multijob_post_fork
-	fi
-
-	# Export CXX so it ends up in /usr/lib/python2.X/config/Makefile.
-	tc-export CXX
-	# The configure script fails to use pkg-config correctly.
-	# http://bugs.python.org/issue15506
-	export ac_cv_path_PKG_CONFIG=$(tc-getPKG_CONFIG)
-
-	# Set LDFLAGS so we link modules with -lpython2.6 correctly.
-	# Needed on FreeBSD unless Python 2.6 is already installed.
-	# Please query BSD team before removing this!
-	append-ldflags "-L."
-
-	cd "${WORKDIR}"/${CHOST}
-	ECONF_SOURCE=${S} OPT="" \
-	econf \
-		--with-fpectl \
-		--enable-shared \
-		$(use_enable ipv6) \
-		$(use_with threads) \
-		$(use wide-unicode && echo "--enable-unicode=ucs4" || echo "--enable-unicode=ucs2") \
-		--infodir='${prefix}/share/info' \
-		--mandir='${prefix}/share/man' \
-		--with-libc="" \
-		--with-system-ffi
-
-	if tc-is-cross-compiler; then
-		# Modify the Makefile.pre so we don't regen for the host/ one.
-		# We need to link the host python programs into $PWD and run
-		# them from here because the distutils sysconfig module will
-		# parse Makefile/etc... from argv[0], and we need it to pick
-		# up the target settings, not the host ones.
-		sed -i \
-			-e '1iHOSTPYTHONPATH = ./hostpythonpath:' \
-			-e '/^HOSTPYTHON/s:=.*:= ./hostpython:' \
-			-e '/^HOSTPGEN/s:=.*:= ./Parser/hostpgen:' \
-			Makefile{.pre,} || die "sed failed"
-	fi
-
-	multijob_finish
-}
-
-src_compile() {
-	if tc-is-cross-compiler; then
-		cd "${WORKDIR}"/${CBUILD}
-		# Disable as many modules as possible -- but we need a few to install.
-		PYTHON_DISABLE_MODULES=$(
-			sed -n "/Extension('/{s:^.*Extension('::;s:'.*::;p}" "${S}"/setup.py | \
-				egrep -v '(unicodedata|time|cStringIO|_struct|binascii)'
-		) \
-		PTHON_DISABLE_SSL="1" \
-		SYSROOT= \
-		emake || die "cross-make failed"
-		# See comment in src_configure about these.
-		ln python ../${CHOST}/hostpython || die
-		ln Parser/pgen ../${CHOST}/Parser/hostpgen || die
-		ln -s ../${CBUILD}/build/lib.*/ ../${CHOST}/hostpythonpath || die
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	default
-
-	# Work around bug 329499. See also bug 413751.
-	pax-mark m python
-}
-
-src_test() {
-	# Tests will not work when cross compiling.
-	if tc-is-cross-compiler; then
-		elog "Disabling tests due to crosscompiling."
-		return
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-
-	# Skip failing tests.
-	local skipped_tests="distutils tcl"
-
-	for test in ${skipped_tests}; do
-		mv "${S}"/Lib/test/test_${test}.py "${T}"
-	done
-
-	# Rerun failed tests in verbose mode (regrtest -w).
-	PYTHONDONTWRITEBYTECODE="" emake test EXTRATESTOPTS="-w" < /dev/tty
-	local result="$?"
-
-	for test in ${skipped_tests}; do
-		mv "${T}/test_${test}.py" "${S}"/Lib/test
-	done
-
-	elog "The following tests have been skipped:"
-	for test in ${skipped_tests}; do
-		elog "test_${test}.py"
-	done
-
-	elog "If you would like to run them, you may:"
-	elog "cd '${EPREFIX}/usr/$(get_libdir)/python${SLOT}/test'"
-	elog "and run the tests separately."
-
-	if [[ "${result}" -ne 0 ]]; then
-		die "emake test failed"
-	fi
-}
-
-src_install() {
-	[[ -z "${ED}" ]] && ED="${D%/}${EPREFIX}/"
-
-	local libdir=${ED}/usr/$(get_libdir)/python${SLOT}
-
-	cd "${WORKDIR}"/${CHOST}
-	emake DESTDIR="${D}" altinstall maninstall || die "emake altinstall maninstall failed"
-
-	# Backwards compat with Gentoo divergence.
-	dosym python${SLOT}-config /usr/bin/python-config-${SLOT} || die
-
-	# Fix collisions between different slots of Python.
-	mv "${ED}usr/bin/2to3" "${ED}usr/bin/2to3-${SLOT}"
-	mv "${ED}usr/bin/pydoc" "${ED}usr/bin/pydoc${SLOT}"
-	mv "${ED}usr/bin/idle" "${ED}usr/bin/idle${SLOT}"
-	mv "${ED}usr/share/man/man1/python.1" "${ED}usr/share/man/man1/python${SLOT}.1"
-	rm -f "${ED}usr/bin/smtpd.py"
-
-	if use build; then
-		rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{bsddb,dbhash.py,idlelib,lib-tk,sqlite3,test}
-	else
-		use elibc_uclibc && rm -fr "${libdir}/"{bsddb/test,test}
-		use berkdb || rm -fr "${libdir}/"{bsddb,dbhash.py,test/test_bsddb*}
-		use sqlite || rm -fr "${libdir}/"{sqlite3,test/test_sqlite*}
-		use tk || rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{idlelib,lib-tk}
-	fi
-
-	use threads || rm -fr "${libdir}/multiprocessing"
-	use wininst || rm -f "${libdir}/distutils/command/"wininst-*.exe
-
-	dodoc "${S}"/Misc/{ACKS,HISTORY,NEWS} || die "dodoc failed"
-
-	if use examples; then
-		insinto /usr/share/doc/${PF}/examples
-		doins -r "${S}"/Tools || die "doins failed"
-	fi
-
-	newconfd "${FILESDIR}/pydoc.conf" pydoc-${SLOT} || die "newconfd failed"
-	newinitd "${FILESDIR}/pydoc.init" pydoc-${SLOT} || die "newinitd failed"
-	sed \
-		-e "s:@PYDOC_PORT_VARIABLE@:PYDOC${SLOT/./_}_PORT:" \
-		-e "s:@PYDOC@:pydoc${SLOT}:" \
-		-i "${ED}etc/conf.d/pydoc-${SLOT}" "${ED}etc/init.d/pydoc-${SLOT}" || die "sed failed"
-
-	# for python-exec
-	python_export python${SLOT} EPYTHON PYTHON PYTHON_SITEDIR
-
-	# if not using a cross-compiler, use the fresh binary
-	if ! tc-is-cross-compiler; then
-		local PYTHON=./python \
-			LD_LIBRARY_PATH=${LD_LIBRARY_PATH+${LD_LIBRARY_PATH}:}.
-		export LD_LIBRARY_PATH
-	fi
-
-	echo "EPYTHON='${EPYTHON}'" > epython.py
-	python_domodule epython.py
-}
-
-pkg_preinst() {
-	if has_version "<${CATEGORY}/${PN}-${SLOT}" && ! has_version "${CATEGORY}/${PN}:2.6" && ! has_version "${CATEGORY}/${PN}:2.7"; then
-		python_updater_warning="1"
-	fi
-}
-
-eselect_python_update() {
-	[[ -z "${EROOT}" || (! -d "${EROOT}" && -d "${ROOT}") ]] && EROOT="${ROOT%/}${EPREFIX}/"
-
-	if [[ -z "$(eselect python show)" || ! -f "${EROOT}usr/bin/$(eselect python show)" ]]; then
-		eselect python update
-	fi
-
-	if [[ -z "$(eselect python show --python${PV%%.*})" || ! -f "${EROOT}usr/bin/$(eselect python show --python${PV%%.*})" ]]; then
-		eselect python update --python${PV%%.*}
-	fi
-}
-
-pkg_postinst() {
-	eselect_python_update
-
-	if [[ "${python_updater_warning}" == "1" ]]; then
-		ewarn "You have just upgraded from an older version of Python."
-		ewarn "You should switch active version of Python ${PV%%.*} and run"
-		ewarn "'python-updater [options]' to rebuild Python modules."
-	fi
-}
-
-pkg_postrm() {
-	eselect_python_update
-}
diff --git a/dev-lang/python/python-2.6.8-r2.ebuild b/dev-lang/python/python-2.6.8-r2.ebuild
deleted file mode 100644
index 5a692a2b02d0..000000000000
--- a/dev-lang/python/python-2.6.8-r2.ebuild
+++ /dev/null
@@ -1,365 +0,0 @@
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/python-2.6.8-r2.ebuild,v 1.1 2013/06/30 16:08:08 floppym Exp $
-
-EAPI="2"
-WANT_AUTOMAKE="none"
-WANT_LIBTOOL="none"
-
-inherit autotools eutils flag-o-matic multilib pax-utils python-utils-r1 toolchain-funcs multiprocessing
-
-MY_P="Python-${PV}"
-PATCHSET_REVISION="0"
-
-DESCRIPTION="An interpreted, interactive, object-oriented programming language"
-HOMEPAGE="http://www.python.org/"
-SRC_URI="http://www.python.org/ftp/python/${PV}/${MY_P}.tar.bz2
-	mirror://gentoo/python-gentoo-patches-${PV}-${PATCHSET_REVISION}.tar.bz2"
-
-LICENSE="PSF-2"
-SLOT="2.6"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~sparc-fbsd ~x86-fbsd"
-IUSE="-berkdb build doc elibc_uclibc examples gdbm hardened ipv6 +ncurses +readline sqlite +ssl +threads tk +wide-unicode wininst +xml"
-
-# Do not add a dependency on dev-lang/python to this ebuild.
-# If you need to apply a patch which requires python for bootstrapping, please
-# run the bootstrap code on your dev box and include the results in the
-# patchset. See bug 447752.
-
-RDEPEND="app-arch/bzip2
-	>=sys-libs/zlib-1.1.3
-	virtual/libffi
-	virtual/libintl
-	!build? (
-		berkdb? ( || (
-			sys-libs/db:4.7
-			sys-libs/db:4.6
-			sys-libs/db:4.5
-			sys-libs/db:4.4
-			sys-libs/db:4.3
-			sys-libs/db:4.2
-		) )
-		gdbm? ( sys-libs/gdbm[berkdb] )
-		ncurses? (
-			>=sys-libs/ncurses-5.2
-			readline? ( >=sys-libs/readline-4.1 )
-		)
-		sqlite? ( >=dev-db/sqlite-3.3.3:3 )
-		ssl? ( dev-libs/openssl )
-		tk? (
-			>=dev-lang/tk-8.0
-			dev-tcltk/blt
-		)
-		xml? ( >=dev-libs/expat-2.1 )
-	)
-	!!<sys-apps/portage-2.1.9"
-DEPEND="${RDEPEND}
-	virtual/pkgconfig
-	>=sys-devel/autoconf-2.61
-	!sys-devel/gcc[libffi]"
-RDEPEND+=" !build? ( app-misc/mime-types )
-	doc? ( dev-python/python-docs:${SLOT} )"
-PDEPEND="app-admin/eselect-python
-	app-admin/python-updater"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
-	if use berkdb; then
-		ewarn "'bsddb' module is out-of-date and no longer maintained inside"
-		ewarn "dev-lang/python. 'bsddb' and 'dbhash' modules have been additionally"
-		ewarn "removed in Python 3. A maintained alternative of 'bsddb3' module"
-		ewarn "is provided by dev-python/bsddb3."
-	else
-		if has_version "=${CATEGORY}/${PN}-${PV%%.*}*[berkdb]"; then
-			ewarn "You are migrating from =${CATEGORY}/${PN}-${PV%%.*}*[berkdb]"
-			ewarn "to =${CATEGORY}/${PN}-${PV%%.*}*[-berkdb]."
-			ewarn "You might need to migrate your databases."
-		fi
-	fi
-}
-
-src_prepare() {
-	# Ensure that internal copies of expat, libffi and zlib are not used.
-	rm -fr Modules/expat
-	rm -fr Modules/_ctypes/libffi*
-	rm -fr Modules/zlib
-
-	local excluded_patches
-	if ! tc-is-cross-compiler; then
-		excluded_patches="*_all_crosscompile.patch"
-	fi
-
-	EPATCH_EXCLUDE="${excluded_patches}" EPATCH_SUFFIX="patch" \
-		epatch "${WORKDIR}/${PV}-${PATCHSET_REVISION}"
-
-	epatch "${FILESDIR}/python-2.5-tcl86.patch"
-
-	sed -i -e "s:@@GENTOO_LIBDIR@@:$(get_libdir):g" \
-		Lib/distutils/command/install.py \
-		Lib/distutils/sysconfig.py \
-		Lib/site.py \
-		Makefile.pre.in \
-		Modules/Setup.dist \
-		Modules/getpath.c \
-		setup.py || die "sed failed to replace @@GENTOO_LIBDIR@@"
-
-	epatch_user
-
-	eautoconf
-	eautoheader
-}
-
-src_configure() {
-	if use build; then
-		# Disable extraneous modules with extra dependencies.
-		export PYTHON_DISABLE_MODULES="dbm _bsddb gdbm _curses _curses_panel readline _sqlite3 _tkinter _elementtree pyexpat"
-		export PYTHON_DISABLE_SSL="1"
-	else
-		# dbm module can be linked against berkdb or gdbm.
-		# Defaults to gdbm when both are enabled, #204343.
-		local disable
-		use berkdb   || use gdbm || disable+=" dbm"
-		use berkdb   || disable+=" _bsddb"
-		use gdbm     || disable+=" gdbm"
-		use ncurses  || disable+=" _curses _curses_panel"
-		use readline || disable+=" readline"
-		use sqlite   || disable+=" _sqlite3"
-		use ssl      || export PYTHON_DISABLE_SSL="1"
-		use tk       || disable+=" _tkinter"
-		use xml      || disable+=" _elementtree pyexpat" # _elementtree uses pyexpat.
-		export PYTHON_DISABLE_MODULES="${disable}"
-
-		if ! use xml; then
-			ewarn "You have configured Python without XML support."
-			ewarn "This is NOT a recommended configuration as you"
-			ewarn "may face problems parsing any XML documents."
-		fi
-	fi
-
-	if [[ -n "${PYTHON_DISABLE_MODULES}" ]]; then
-		einfo "Disabled modules: ${PYTHON_DISABLE_MODULES}"
-	fi
-
-	if [[ "$(gcc-major-version)" -ge 4 ]]; then
-		append-flags -fwrapv
-	fi
-
-	filter-flags -malign-double
-
-	[[ "${ARCH}" == "alpha" ]] && append-flags -fPIC
-
-	# https://bugs.gentoo.org/show_bug.cgi?id=50309
-	if is-flagq -O3; then
-		is-flagq -fstack-protector-all && replace-flags -O3 -O2
-		use hardened && replace-flags -O3 -O2
-	fi
-
-	# Run the configure scripts in parallel.
-	multijob_init
-
-	mkdir -p "${WORKDIR}"/{${CBUILD},${CHOST}}
-
-	if tc-is-cross-compiler; then
-		(
-		multijob_child_init
-		cd "${WORKDIR}"/${CBUILD} >/dev/null
-		OPT="-O1" CFLAGS="" CPPFLAGS="" LDFLAGS="" CC="" \
-		"${S}"/configure \
-			--{build,host}=${CBUILD} \
-			|| die "cross-configure failed"
-		) &
-		multijob_post_fork
-	fi
-
-	# Export CXX so it ends up in /usr/lib/python2.X/config/Makefile.
-	tc-export CXX
-	# The configure script fails to use pkg-config correctly.
-	# http://bugs.python.org/issue15506
-	export ac_cv_path_PKG_CONFIG=$(tc-getPKG_CONFIG)
-
-	# Set LDFLAGS so we link modules with -lpython2.6 correctly.
-	# Needed on FreeBSD unless Python 2.6 is already installed.
-	# Please query BSD team before removing this!
-	append-ldflags "-L."
-
-	cd "${WORKDIR}"/${CHOST}
-	ECONF_SOURCE=${S} OPT="" \
-	econf \
-		--with-fpectl \
-		--enable-shared \
-		$(use_enable ipv6) \
-		$(use_with threads) \
-		$(use wide-unicode && echo "--enable-unicode=ucs4" || echo "--enable-unicode=ucs2") \
-		--infodir='${prefix}/share/info' \
-		--mandir='${prefix}/share/man' \
-		--with-libc="" \
-		--with-system-ffi
-
-	if tc-is-cross-compiler; then
-		# Modify the Makefile.pre so we don't regen for the host/ one.
-		# We need to link the host python programs into $PWD and run
-		# them from here because the distutils sysconfig module will
-		# parse Makefile/etc... from argv[0], and we need it to pick
-		# up the target settings, not the host ones.
-		sed -i \
-			-e '1iHOSTPYTHONPATH = ./hostpythonpath:' \
-			-e '/^HOSTPYTHON/s:=.*:= ./hostpython:' \
-			-e '/^HOSTPGEN/s:=.*:= ./Parser/hostpgen:' \
-			Makefile{.pre,} || die "sed failed"
-	fi
-
-	multijob_finish
-}
-
-src_compile() {
-	if tc-is-cross-compiler; then
-		cd "${WORKDIR}"/${CBUILD}
-		# Disable as many modules as possible -- but we need a few to install.
-		PYTHON_DISABLE_MODULES=$(
-			sed -n "/Extension('/{s:^.*Extension('::;s:'.*::;p}" "${S}"/setup.py | \
-				egrep -v '(unicodedata|time|cStringIO|_struct|binascii)'
-		) \
-		PTHON_DISABLE_SSL="1" \
-		SYSROOT= \
-		emake || die "cross-make failed"
-		# See comment in src_configure about these.
-		ln python ../${CHOST}/hostpython || die
-		ln Parser/pgen ../${CHOST}/Parser/hostpgen || die
-		ln -s ../${CBUILD}/build/lib.*/ ../${CHOST}/hostpythonpath || die
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	default
-
-	# Work around bug 329499. See also bug 413751.
-	pax-mark m python
-}
-
-src_test() {
-	# Tests will not work when cross compiling.
-	if tc-is-cross-compiler; then
-		elog "Disabling tests due to crosscompiling."
-		return
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-
-	# Skip failing tests.
-	local skipped_tests="distutils tcl"
-
-	for test in ${skipped_tests}; do
-		mv "${S}"/Lib/test/test_${test}.py "${T}"
-	done
-
-	# Rerun failed tests in verbose mode (regrtest -w).
-	PYTHONDONTWRITEBYTECODE="" emake test EXTRATESTOPTS="-w" < /dev/tty
-	local result="$?"
-
-	for test in ${skipped_tests}; do
-		mv "${T}/test_${test}.py" "${S}"/Lib/test
-	done
-
-	elog "The following tests have been skipped:"
-	for test in ${skipped_tests}; do
-		elog "test_${test}.py"
-	done
-
-	elog "If you would like to run them, you may:"
-	elog "cd '${EPREFIX}/usr/$(get_libdir)/python${SLOT}/test'"
-	elog "and run the tests separately."
-
-	if [[ "${result}" -ne 0 ]]; then
-		die "emake test failed"
-	fi
-}
-
-src_install() {
-	[[ -z "${ED}" ]] && ED="${D%/}${EPREFIX}/"
-
-	local libdir=${ED}/usr/$(get_libdir)/python${SLOT}
-
-	cd "${WORKDIR}"/${CHOST}
-	emake DESTDIR="${D}" altinstall maninstall || die "emake altinstall maninstall failed"
-
-	# Backwards compat with Gentoo divergence.
-	dosym python${SLOT}-config /usr/bin/python-config-${SLOT} || die
-
-	# Fix collisions between different slots of Python.
-	mv "${ED}usr/bin/2to3" "${ED}usr/bin/2to3-${SLOT}"
-	mv "${ED}usr/bin/pydoc" "${ED}usr/bin/pydoc${SLOT}"
-	mv "${ED}usr/bin/idle" "${ED}usr/bin/idle${SLOT}"
-	mv "${ED}usr/share/man/man1/python.1" "${ED}usr/share/man/man1/python${SLOT}.1"
-	rm -f "${ED}usr/bin/smtpd.py"
-
-	if use build; then
-		rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{bsddb,dbhash.py,idlelib,lib-tk,sqlite3,test}
-	else
-		use elibc_uclibc && rm -fr "${libdir}/"{bsddb/test,test}
-		use berkdb || rm -fr "${libdir}/"{bsddb,dbhash.py,test/test_bsddb*}
-		use sqlite || rm -fr "${libdir}/"{sqlite3,test/test_sqlite*}
-		use tk || rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{idlelib,lib-tk}
-	fi
-
-	use threads || rm -fr "${libdir}/multiprocessing"
-	use wininst || rm -f "${libdir}/distutils/command/"wininst-*.exe
-
-	dodoc "${S}"/Misc/{ACKS,HISTORY,NEWS} || die "dodoc failed"
-
-	if use examples; then
-		insinto /usr/share/doc/${PF}/examples
-		doins -r "${S}"/Tools || die "doins failed"
-	fi
-
-	newconfd "${FILESDIR}/pydoc.conf" pydoc-${SLOT} || die "newconfd failed"
-	newinitd "${FILESDIR}/pydoc.init" pydoc-${SLOT} || die "newinitd failed"
-	sed \
-		-e "s:@PYDOC_PORT_VARIABLE@:PYDOC${SLOT/./_}_PORT:" \
-		-e "s:@PYDOC@:pydoc${SLOT}:" \
-		-i "${ED}etc/conf.d/pydoc-${SLOT}" "${ED}etc/init.d/pydoc-${SLOT}" || die "sed failed"
-
-	# for python-exec
-	python_export python${SLOT} EPYTHON PYTHON PYTHON_SITEDIR
-
-	# if not using a cross-compiler, use the fresh binary
-	if ! tc-is-cross-compiler; then
-		local PYTHON=./python \
-			LD_LIBRARY_PATH=${LD_LIBRARY_PATH+${LD_LIBRARY_PATH}:}.
-		export LD_LIBRARY_PATH
-	fi
-
-	echo "EPYTHON='${EPYTHON}'" > epython.py
-	python_domodule epython.py
-}
-
-pkg_preinst() {
-	if has_version "<${CATEGORY}/${PN}-${SLOT}" && ! has_version "${CATEGORY}/${PN}:2.6" && ! has_version "${CATEGORY}/${PN}:2.7"; then
-		python_updater_warning="1"
-	fi
-}
-
-eselect_python_update() {
-	[[ -z "${EROOT}" || (! -d "${EROOT}" && -d "${ROOT}") ]] && EROOT="${ROOT%/}${EPREFIX}/"
-
-	if [[ -z "$(eselect python show)" || ! -f "${EROOT}usr/bin/$(eselect python show)" ]]; then
-		eselect python update
-	fi
-
-	if [[ -z "$(eselect python show --python${PV%%.*})" || ! -f "${EROOT}usr/bin/$(eselect python show --python${PV%%.*})" ]]; then
-		eselect python update --python${PV%%.*}
-	fi
-}
-
-pkg_postinst() {
-	eselect_python_update
-
-	if [[ "${python_updater_warning}" == "1" ]]; then
-		ewarn "You have just upgraded from an older version of Python."
-		ewarn "You should switch active version of Python ${PV%%.*} and run"
-		ewarn "'python-updater [options]' to rebuild Python modules."
-	fi
-}
-
-pkg_postrm() {
-	eselect_python_update
-}
diff --git a/dev-lang/python/python-2.7.3-r2.ebuild b/dev-lang/python/python-2.7.3-r2.ebuild
deleted file mode 100644
index 40e42062cce5..000000000000
--- a/dev-lang/python/python-2.7.3-r2.ebuild
+++ /dev/null
@@ -1,329 +0,0 @@
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/python-2.7.3-r2.ebuild,v 1.16 2013/08/28 15:59:25 floppym Exp $
-
-EAPI="2"
-WANT_AUTOMAKE="none"
-WANT_LIBTOOL="none"
-
-inherit autotools eutils flag-o-matic multilib pax-utils python toolchain-funcs
-
-MY_P="Python-${PV}"
-PATCHSET_REVISION="1"
-
-DESCRIPTION="Python is an interpreted, interactive, object-oriented programming language."
-HOMEPAGE="http://www.python.org/"
-SRC_URI="http://www.python.org/ftp/python/${PV}/${MY_P}.tar.bz2
-	mirror://gentoo/python-gentoo-patches-${PV}-${PATCHSET_REVISION}.tar.bz2"
-
-LICENSE="PSF-2"
-SLOT="2.7"
-PYTHON_ABI="${SLOT}"
-KEYWORDS="alpha amd64 arm hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="-berkdb build doc elibc_uclibc examples gdbm hardened ipv6 +ncurses +readline sqlite +ssl +threads tk +wide-unicode wininst +xml"
-
-RDEPEND="app-arch/bzip2
-		>=sys-libs/zlib-1.1.3
-		virtual/libffi
-		virtual/libintl
-		!build? (
-			berkdb? ( || (
-				sys-libs/db:4.8
-				sys-libs/db:4.7
-				sys-libs/db:4.6
-				sys-libs/db:4.5
-				sys-libs/db:4.4
-				sys-libs/db:4.3
-				sys-libs/db:4.2
-			) )
-			gdbm? ( sys-libs/gdbm[berkdb] )
-			ncurses? (
-				>=sys-libs/ncurses-5.2
-				readline? ( >=sys-libs/readline-4.1 )
-			)
-			sqlite? ( >=dev-db/sqlite-3.3.8:3 )
-			ssl? ( dev-libs/openssl )
-			tk? (
-				>=dev-lang/tk-8.0
-				dev-tcltk/blt
-			)
-			xml? ( >=dev-libs/expat-2.1 )
-		)
-		!!<sys-apps/portage-2.1.9"
-DEPEND="${RDEPEND}
-		virtual/pkgconfig
-		>=sys-devel/autoconf-2.65
-		!sys-devel/gcc[libffi]"
-RDEPEND+=" !build? ( app-misc/mime-types )
-	doc? ( dev-python/python-docs:${SLOT} )"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
-	python_pkg_setup
-
-	if use berkdb; then
-		ewarn "\"bsddb\" module is out-of-date and no longer maintained inside dev-lang/python."
-		ewarn "\"bsddb\" and \"dbhash\" modules have been additionally removed in Python 3."
-		ewarn "You should use external, still maintained \"bsddb3\" module provided by dev-python/bsddb3,"
-		ewarn "which supports both Python 2 and Python 3."
-	else
-		if has_version "=${CATEGORY}/${PN}-${PV%%.*}*[berkdb]"; then
-			ewarn "You are migrating from =${CATEGORY}/${PN}-${PV%%.*}*[berkdb] to =${CATEGORY}/${PN}-${PV%%.*}*[-berkdb]."
-			ewarn "You might need to migrate your databases."
-		fi
-	fi
-}
-
-src_prepare() {
-	# Ensure that internal copies of expat, libffi and zlib are not used.
-	rm -fr Modules/expat
-	rm -fr Modules/_ctypes/libffi*
-	rm -fr Modules/zlib
-
-	local excluded_patches
-	if ! tc-is-cross-compiler; then
-		excluded_patches="*_all_crosscompile.patch"
-	fi
-
-	EPATCH_EXCLUDE="${excluded_patches}" EPATCH_SUFFIX="patch" \
-		epatch "${WORKDIR}/${PV}-${PATCHSET_REVISION}"
-
-	sed -i -e "s:@@GENTOO_LIBDIR@@:$(get_libdir):g" \
-		Lib/distutils/command/install.py \
-		Lib/distutils/sysconfig.py \
-		Lib/site.py \
-		Lib/sysconfig.py \
-		Lib/test/test_site.py \
-		Makefile.pre.in \
-		Modules/Setup.dist \
-		Modules/getpath.c \
-		setup.py || die "sed failed to replace @@GENTOO_LIBDIR@@"
-
-	eautoconf
-	eautoheader
-}
-
-src_configure() {
-	if use build; then
-		# Disable extraneous modules with extra dependencies.
-		export PYTHON_DISABLE_MODULES="dbm _bsddb gdbm _curses _curses_panel readline _sqlite3 _tkinter _elementtree pyexpat"
-		export PYTHON_DISABLE_SSL="1"
-	else
-		# dbm module can be linked against berkdb or gdbm.
-		# Defaults to gdbm when both are enabled, #204343.
-		local disable
-		use berkdb   || use gdbm || disable+=" dbm"
-		use berkdb   || disable+=" _bsddb"
-		use gdbm     || disable+=" gdbm"
-		use ncurses  || disable+=" _curses _curses_panel"
-		use readline || disable+=" readline"
-		use sqlite   || disable+=" _sqlite3"
-		use ssl      || export PYTHON_DISABLE_SSL="1"
-		use tk       || disable+=" _tkinter"
-		use xml      || disable+=" _elementtree pyexpat" # _elementtree uses pyexpat.
-		export PYTHON_DISABLE_MODULES="${disable}"
-
-		if ! use xml; then
-			ewarn "You have configured Python without XML support."
-			ewarn "This is NOT a recommended configuration as you"
-			ewarn "may face problems parsing any XML documents."
-		fi
-	fi
-
-	if [[ -n "${PYTHON_DISABLE_MODULES}" ]]; then
-		einfo "Disabled modules: ${PYTHON_DISABLE_MODULES}"
-	fi
-
-	if [[ "$(gcc-major-version)" -ge 4 ]]; then
-		append-flags -fwrapv
-	fi
-
-	filter-flags -malign-double
-
-	[[ "${ARCH}" == "alpha" ]] && append-flags -fPIC
-
-	# https://bugs.gentoo.org/show_bug.cgi?id=50309
-	if is-flagq -O3; then
-		is-flagq -fstack-protector-all && replace-flags -O3 -O2
-		use hardened && replace-flags -O3 -O2
-	fi
-
-	if tc-is-cross-compiler; then
-		OPT="-O1" CFLAGS="" LDFLAGS="" CC="" \
-		./configure --{build,host}=${CBUILD} || die "cross-configure failed"
-		emake python Parser/pgen || die "cross-make failed"
-		mv python hostpython
-		mv Parser/pgen Parser/hostpgen
-		make distclean
-		sed -i \
-			-e "/^HOSTPYTHON/s:=.*:=./hostpython:" \
-			-e "/^HOSTPGEN/s:=.*:=./Parser/hostpgen:" \
-			Makefile.pre.in || die "sed failed"
-
-		# The configure script assumes it's buggy when cross-compiling.
-		export ac_cv_buggy_getaddrinfo=no
-		export ac_cv_have_long_long_format=yes
-	fi
-
-	# Export CXX so it ends up in /usr/lib/python2.X/config/Makefile.
-	tc-export CXX
-	# The configure script fails to use pkg-config correctly.
-	# http://bugs.python.org/issue15506
-	export ac_cv_path_PKG_CONFIG=$(tc-getPKG_CONFIG)
-
-	# Set LDFLAGS so we link modules with -lpython2.7 correctly.
-	# Needed on FreeBSD unless Python 2.7 is already installed.
-	# Please query BSD team before removing this!
-	append-ldflags "-L."
-
-	local dbmliborder
-	if use gdbm; then
-		dbmliborder+="${dbmliborder:+:}gdbm"
-	fi
-	if use berkdb; then
-		dbmliborder+="${dbmliborder:+:}bdb"
-	fi
-
-	OPT="" econf \
-		--with-fpectl \
-		--enable-shared \
-		$(use_enable ipv6) \
-		$(use_with threads) \
-		$(use wide-unicode && echo "--enable-unicode=ucs4" || echo "--enable-unicode=ucs2") \
-		--infodir='${prefix}/share/info' \
-		--mandir='${prefix}/share/man' \
-		--with-dbmliborder="${dbmliborder}" \
-		--with-libc="" \
-		--enable-loadable-sqlite-extensions \
-		--with-system-expat \
-		--with-system-ffi
-}
-
-src_compile() {
-	emake EPYTHON="python${PV%%.*}" || die "emake failed"
-
-	# Work around bug 329499. See also bug 413751.
-	pax-mark m python
-}
-
-src_test() {
-	# Tests will not work when cross compiling.
-	if tc-is-cross-compiler; then
-		elog "Disabling tests due to crosscompiling."
-		return
-	fi
-
-	# Byte compiling should be enabled here.
-	# Otherwise test_import fails.
-	python_enable_pyc
-
-	# Skip failing tests.
-	local skipped_tests="distutils gdb"
-
-	for test in ${skipped_tests}; do
-		mv Lib/test/test_${test}.py "${T}"
-	done
-
-	# Rerun failed tests in verbose mode (regrtest -w).
-	emake test EXTRATESTOPTS="-w" < /dev/tty
-	local result="$?"
-
-	for test in ${skipped_tests}; do
-		mv "${T}/test_${test}.py" Lib/test
-	done
-
-	elog "The following tests have been skipped:"
-	for test in ${skipped_tests}; do
-		elog "test_${test}.py"
-	done
-
-	elog "If you would like to run them, you may:"
-	elog "cd '${EPREFIX}$(python_get_libdir)/test'"
-	elog "and run the tests separately."
-
-	python_disable_pyc
-
-	if [[ "${result}" -ne 0 ]]; then
-		die "emake test failed"
-	fi
-}
-
-src_install() {
-	[[ -z "${ED}" ]] && ED="${D%/}${EPREFIX}/"
-
-	emake DESTDIR="${D}" altinstall maninstall || die "emake altinstall maninstall failed"
-	python_clean_installation_image -q
-
-	sed -e "s/\(LDFLAGS=\).*/\1/" -i "${ED}$(python_get_libdir)/config/Makefile" || die "sed failed"
-
-	mv "${ED}usr/bin/python${SLOT}-config" "${ED}usr/bin/python-config-${SLOT}"
-
-	# Fix collisions between different slots of Python.
-	mv "${ED}usr/bin/2to3" "${ED}usr/bin/2to3-${SLOT}"
-	mv "${ED}usr/bin/pydoc" "${ED}usr/bin/pydoc${SLOT}"
-	mv "${ED}usr/bin/idle" "${ED}usr/bin/idle${SLOT}"
-	rm -f "${ED}usr/bin/smtpd.py"
-
-	if use build; then
-		rm -fr "${ED}usr/bin/idle${SLOT}" "${ED}$(python_get_libdir)/"{bsddb,dbhash.py,idlelib,lib-tk,sqlite3,test}
-	else
-		use elibc_uclibc && rm -fr "${ED}$(python_get_libdir)/"{bsddb/test,test}
-		use berkdb || rm -fr "${ED}$(python_get_libdir)/"{bsddb,dbhash.py,test/test_bsddb*}
-		use sqlite || rm -fr "${ED}$(python_get_libdir)/"{sqlite3,test/test_sqlite*}
-		use tk || rm -fr "${ED}usr/bin/idle${SLOT}" "${ED}$(python_get_libdir)/"{idlelib,lib-tk}
-	fi
-
-	use threads || rm -fr "${ED}$(python_get_libdir)/multiprocessing"
-	use wininst || rm -f "${ED}$(python_get_libdir)/distutils/command/"wininst-*.exe
-
-	dodoc Misc/{ACKS,HISTORY,NEWS} || die "dodoc failed"
-
-	if use examples; then
-		insinto /usr/share/doc/${PF}/examples
-		doins -r Tools || die "doins failed"
-	fi
-
-	newconfd "${FILESDIR}/pydoc.conf" pydoc-${SLOT} || die "newconfd failed"
-	newinitd "${FILESDIR}/pydoc.init" pydoc-${SLOT} || die "newinitd failed"
-	sed \
-		-e "s:@PYDOC_PORT_VARIABLE@:PYDOC${SLOT/./_}_PORT:" \
-		-e "s:@PYDOC@:pydoc${SLOT}:" \
-		-i "${ED}etc/conf.d/pydoc-${SLOT}" "${ED}etc/init.d/pydoc-${SLOT}" || die "sed failed"
-}
-
-pkg_preinst() {
-	if has_version "<${CATEGORY}/${PN}-${SLOT}" && ! has_version "${CATEGORY}/${PN}:2.7"; then
-		python_updater_warning="1"
-	fi
-}
-
-eselect_python_update() {
-	[[ -z "${EROOT}" || (! -d "${EROOT}" && -d "${ROOT}") ]] && EROOT="${ROOT%/}${EPREFIX}/"
-
-	if [[ -z "$(eselect python show)" || ! -f "${EROOT}usr/bin/$(eselect python show)" ]]; then
-		eselect python update
-	fi
-
-	if [[ -z "$(eselect python show --python${PV%%.*})" || ! -f "${EROOT}usr/bin/$(eselect python show --python${PV%%.*})" ]]; then
-		eselect python update --python${PV%%.*}
-	fi
-}
-
-pkg_postinst() {
-	eselect_python_update
-
-	python_mod_optimize -f -x "/(site-packages|test|tests)/" $(python_get_libdir)
-
-	if [[ "${python_updater_warning}" == "1" ]]; then
-		ewarn "You have just upgraded from an older version of Python."
-		ewarn "You should switch active version of Python ${PV%%.*} and run"
-		ewarn "'python-updater [options]' to rebuild Python modules."
-	fi
-}
-
-pkg_postrm() {
-	eselect_python_update
-
-	python_mod_cleanup $(python_get_libdir)
-}
diff --git a/dev-lang/python/python-2.7.3-r3.ebuild b/dev-lang/python/python-2.7.3-r3.ebuild
deleted file mode 100644
index 4fa4c60e8f98..000000000000
--- a/dev-lang/python/python-2.7.3-r3.ebuild
+++ /dev/null
@@ -1,384 +0,0 @@
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/python-2.7.3-r3.ebuild,v 1.23 2013/08/28 15:59:25 floppym Exp $
-
-EAPI="2"
-WANT_AUTOMAKE="none"
-WANT_LIBTOOL="none"
-
-inherit autotools eutils flag-o-matic multilib pax-utils python-utils-r1 toolchain-funcs multiprocessing
-
-MY_P="Python-${PV}"
-PATCHSET_REVISION="1"
-
-DESCRIPTION="An interpreted, interactive, object-oriented programming language"
-HOMEPAGE="http://www.python.org/"
-SRC_URI="http://www.python.org/ftp/python/${PV}/${MY_P}.tar.bz2
-	mirror://gentoo/python-gentoo-patches-${PV}-${PATCHSET_REVISION}.tar.bz2"
-
-LICENSE="PSF-2"
-SLOT="2.7"
-KEYWORDS="alpha amd64 arm hppa ia64 ~m68k ~mips ppc ppc64 s390 sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="-berkdb build doc elibc_uclibc examples gdbm hardened ipv6 +ncurses +readline sqlite +ssl +threads tk +wide-unicode wininst +xml"
-
-# Do not add a dependency on dev-lang/python to this ebuild.
-# If you need to apply a patch which requires python for bootstrapping, please
-# run the bootstrap code on your dev box and include the results in the
-# patchset. See bug 447752.
-
-RDEPEND="app-arch/bzip2
-	>=sys-libs/zlib-1.1.3
-	virtual/libffi
-	virtual/libintl
-	!build? (
-		berkdb? ( || (
-			sys-libs/db:4.8
-			sys-libs/db:4.7
-			sys-libs/db:4.6
-			sys-libs/db:4.5
-			sys-libs/db:4.4
-			sys-libs/db:4.3
-			sys-libs/db:4.2
-		) )
-		gdbm? ( sys-libs/gdbm[berkdb] )
-		ncurses? (
-			>=sys-libs/ncurses-5.2
-			readline? ( >=sys-libs/readline-4.1 )
-		)
-		sqlite? ( >=dev-db/sqlite-3.3.8:3 )
-		ssl? ( dev-libs/openssl )
-		tk? (
-			>=dev-lang/tk-8.0
-			dev-tcltk/blt
-		)
-		xml? ( >=dev-libs/expat-2.1 )
-	)
-	!!<sys-apps/portage-2.1.9"
-DEPEND="${RDEPEND}
-	virtual/pkgconfig
-	>=sys-devel/autoconf-2.65
-	!sys-devel/gcc[libffi]"
-RDEPEND+=" !build? ( app-misc/mime-types )
-	doc? ( dev-python/python-docs:${SLOT} )"
-PDEPEND="app-admin/eselect-python
-	app-admin/python-updater"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
-	if use berkdb; then
-		ewarn "'bsddb' module is out-of-date and no longer maintained inside"
-		ewarn "dev-lang/python. 'bsddb' and 'dbhash' modules have been additionally"
-		ewarn "removed in Python 3. A maintained alternative of 'bsddb3' module"
-		ewarn "is provided by dev-python/bsddb3."
-	else
-		if has_version "=${CATEGORY}/${PN}-${PV%%.*}*[berkdb]"; then
-			ewarn "You are migrating from =${CATEGORY}/${PN}-${PV%%.*}*[berkdb]"
-			ewarn "to =${CATEGORY}/${PN}-${PV%%.*}*[-berkdb]."
-			ewarn "You might need to migrate your databases."
-		fi
-	fi
-}
-
-src_prepare() {
-	# Ensure that internal copies of expat, libffi and zlib are not used.
-	rm -fr Modules/expat
-	rm -fr Modules/_ctypes/libffi*
-	rm -fr Modules/zlib
-
-	local excluded_patches
-	if ! tc-is-cross-compiler; then
-		excluded_patches="*_all_crosscompile.patch"
-	fi
-
-	EPATCH_EXCLUDE="${excluded_patches}" EPATCH_SUFFIX="patch" \
-		epatch "${WORKDIR}/${PV}-${PATCHSET_REVISION}"
-
-	sed -i -e "s:@@GENTOO_LIBDIR@@:$(get_libdir):g" \
-		Lib/distutils/command/install.py \
-		Lib/distutils/sysconfig.py \
-		Lib/site.py \
-		Lib/sysconfig.py \
-		Lib/test/test_site.py \
-		Makefile.pre.in \
-		Modules/Setup.dist \
-		Modules/getpath.c \
-		setup.py || die "sed failed to replace @@GENTOO_LIBDIR@@"
-
-	eautoconf
-	eautoheader
-}
-
-src_configure() {
-	if use build; then
-		# Disable extraneous modules with extra dependencies.
-		export PYTHON_DISABLE_MODULES="dbm _bsddb gdbm _curses _curses_panel readline _sqlite3 _tkinter _elementtree pyexpat"
-		export PYTHON_DISABLE_SSL="1"
-	else
-		# dbm module can be linked against berkdb or gdbm.
-		# Defaults to gdbm when both are enabled, #204343.
-		local disable
-		use berkdb   || use gdbm || disable+=" dbm"
-		use berkdb   || disable+=" _bsddb"
-		use gdbm     || disable+=" gdbm"
-		use ncurses  || disable+=" _curses _curses_panel"
-		use readline || disable+=" readline"
-		use sqlite   || disable+=" _sqlite3"
-		use ssl      || export PYTHON_DISABLE_SSL="1"
-		use tk       || disable+=" _tkinter"
-		use xml      || disable+=" _elementtree pyexpat" # _elementtree uses pyexpat.
-		export PYTHON_DISABLE_MODULES="${disable}"
-
-		if ! use xml; then
-			ewarn "You have configured Python without XML support."
-			ewarn "This is NOT a recommended configuration as you"
-			ewarn "may face problems parsing any XML documents."
-		fi
-	fi
-
-	if [[ -n "${PYTHON_DISABLE_MODULES}" ]]; then
-		einfo "Disabled modules: ${PYTHON_DISABLE_MODULES}"
-	fi
-
-	if [[ "$(gcc-major-version)" -ge 4 ]]; then
-		append-flags -fwrapv
-	fi
-
-	filter-flags -malign-double
-
-	[[ "${ARCH}" == "alpha" ]] && append-flags -fPIC
-
-	# https://bugs.gentoo.org/show_bug.cgi?id=50309
-	if is-flagq -O3; then
-		is-flagq -fstack-protector-all && replace-flags -O3 -O2
-		use hardened && replace-flags -O3 -O2
-	fi
-
-	# Run the configure scripts in parallel.
-	multijob_init
-
-	mkdir -p "${WORKDIR}"/{${CBUILD},${CHOST}}
-
-	if tc-is-cross-compiler; then
-		(
-		multijob_child_init
-		cd "${WORKDIR}"/${CBUILD} >/dev/null
-		OPT="-O1" CFLAGS="" CPPFLAGS="" LDFLAGS="" CC="" \
-		"${S}"/configure \
-			--{build,host}=${CBUILD} \
-			|| die "cross-configure failed"
-		) &
-		multijob_post_fork
-
-		# The configure script assumes it's buggy when cross-compiling.
-		export ac_cv_buggy_getaddrinfo=no
-		export ac_cv_have_long_long_format=yes
-	fi
-
-	# Export CXX so it ends up in /usr/lib/python2.X/config/Makefile.
-	tc-export CXX
-	# The configure script fails to use pkg-config correctly.
-	# http://bugs.python.org/issue15506
-	export ac_cv_path_PKG_CONFIG=$(tc-getPKG_CONFIG)
-
-	# Set LDFLAGS so we link modules with -lpython2.7 correctly.
-	# Needed on FreeBSD unless Python 2.7 is already installed.
-	# Please query BSD team before removing this!
-	append-ldflags "-L."
-
-	local dbmliborder
-	if use gdbm; then
-		dbmliborder+="${dbmliborder:+:}gdbm"
-	fi
-	if use berkdb; then
-		dbmliborder+="${dbmliborder:+:}bdb"
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	ECONF_SOURCE=${S} OPT="" \
-	econf \
-		--with-fpectl \
-		--enable-shared \
-		$(use_enable ipv6) \
-		$(use_with threads) \
-		$(use wide-unicode && echo "--enable-unicode=ucs4" || echo "--enable-unicode=ucs2") \
-		--infodir='${prefix}/share/info' \
-		--mandir='${prefix}/share/man' \
-		--with-dbmliborder="${dbmliborder}" \
-		--with-libc="" \
-		--enable-loadable-sqlite-extensions \
-		--with-system-expat \
-		--with-system-ffi
-
-	if tc-is-cross-compiler; then
-		# Modify the Makefile.pre so we don't regen for the host/ one.
-		# We need to link the host python programs into $PWD and run
-		# them from here because the distutils sysconfig module will
-		# parse Makefile/etc... from argv[0], and we need it to pick
-		# up the target settings, not the host ones.
-		sed -i \
-			-e '1iHOSTPYTHONPATH = ./hostpythonpath:' \
-			-e '/^HOSTPYTHON/s:=.*:= ./hostpython:' \
-			-e '/^HOSTPGEN/s:=.*:= ./Parser/hostpgen:' \
-			Makefile{.pre,} || die "sed failed"
-	fi
-
-	multijob_finish
-}
-
-src_compile() {
-	if tc-is-cross-compiler; then
-		cd "${WORKDIR}"/${CBUILD}
-		# Disable as many modules as possible -- but we need a few to install.
-		PYTHON_DISABLE_MODULES=$(
-			sed -n "/Extension('/{s:^.*Extension('::;s:'.*::;p}" "${S}"/setup.py | \
-				egrep -v '(unicodedata|time|cStringIO|_struct|binascii)'
-		) \
-		PTHON_DISABLE_SSL="1" \
-		SYSROOT= \
-		emake || die "cross-make failed"
-		# See comment in src_configure about these.
-		ln python ../${CHOST}/hostpython || die
-		ln Parser/pgen ../${CHOST}/Parser/hostpgen || die
-		ln -s ../${CBUILD}/build/lib.*/ ../${CHOST}/hostpythonpath || die
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	default
-
-	# Work around bug 329499. See also bug 413751.
-	pax-mark m python
-}
-
-src_test() {
-	# Tests will not work when cross compiling.
-	if tc-is-cross-compiler; then
-		elog "Disabling tests due to crosscompiling."
-		return
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-
-	# Skip failing tests.
-	local skipped_tests="distutils gdb"
-
-	for test in ${skipped_tests}; do
-		mv "${S}"/Lib/test/test_${test}.py "${T}"
-	done
-
-	# Rerun failed tests in verbose mode (regrtest -w).
-	PYTHONDONTWRITEBYTECODE="" emake test EXTRATESTOPTS="-w" < /dev/tty
-	local result="$?"
-
-	for test in ${skipped_tests}; do
-		mv "${T}/test_${test}.py" "${S}"/Lib/test
-	done
-
-	elog "The following tests have been skipped:"
-	for test in ${skipped_tests}; do
-		elog "test_${test}.py"
-	done
-
-	elog "If you would like to run them, you may:"
-	elog "cd '${EPREFIX}/usr/$(get_libdir)/python${SLOT}/test'"
-	elog "and run the tests separately."
-
-	if [[ "${result}" -ne 0 ]]; then
-		die "emake test failed"
-	fi
-}
-
-src_install() {
-	[[ -z "${ED}" ]] && ED="${D%/}${EPREFIX}/"
-
-	local libdir=${ED}/usr/$(get_libdir)/python${SLOT}
-
-	cd "${WORKDIR}"/${CHOST}
-	emake DESTDIR="${D}" altinstall maninstall || die "emake altinstall maninstall failed"
-
-	sed -e "s/\(LDFLAGS=\).*/\1/" -i "${libdir}/config/Makefile" || die "sed failed"
-
-	# Backwards compat with Gentoo divergence.
-	dosym python${SLOT}-config /usr/bin/python-config-${SLOT} || die
-
-	# Fix collisions between different slots of Python.
-	mv "${ED}usr/bin/2to3" "${ED}usr/bin/2to3-${SLOT}"
-	mv "${ED}usr/bin/pydoc" "${ED}usr/bin/pydoc${SLOT}"
-	mv "${ED}usr/bin/idle" "${ED}usr/bin/idle${SLOT}"
-	rm -f "${ED}usr/bin/smtpd.py"
-
-	if use build; then
-		rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{bsddb,dbhash.py,idlelib,lib-tk,sqlite3,test}
-	else
-		use elibc_uclibc && rm -fr "${libdir}/"{bsddb/test,test}
-		use berkdb || rm -fr "${libdir}/"{bsddb,dbhash.py,test/test_bsddb*}
-		use sqlite || rm -fr "${libdir}/"{sqlite3,test/test_sqlite*}
-		use tk || rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{idlelib,lib-tk}
-	fi
-
-	use threads || rm -fr "${libdir}/multiprocessing"
-	use wininst || rm -f "${libdir}/distutils/command/"wininst-*.exe
-
-	dodoc "${S}"/Misc/{ACKS,HISTORY,NEWS} || die "dodoc failed"
-
-	if use examples; then
-		insinto /usr/share/doc/${PF}/examples
-		doins -r "${S}"/Tools || die "doins failed"
-	fi
-	insinto /usr/share/gdb/auto-load/usr/$(get_libdir) #443510
-	local libname=$(printf 'e:\n\t@echo $(INSTSONAME)\ninclude Makefile\n' | \
-		emake --no-print-directory -s -f - 2>/dev/null)
-	newins "${S}"/Tools/gdb/libpython.py "${libname}"-gdb.py
-
-	newconfd "${FILESDIR}/pydoc.conf" pydoc-${SLOT} || die "newconfd failed"
-	newinitd "${FILESDIR}/pydoc.init" pydoc-${SLOT} || die "newinitd failed"
-	sed \
-		-e "s:@PYDOC_PORT_VARIABLE@:PYDOC${SLOT/./_}_PORT:" \
-		-e "s:@PYDOC@:pydoc${SLOT}:" \
-		-i "${ED}etc/conf.d/pydoc-${SLOT}" "${ED}etc/init.d/pydoc-${SLOT}" || die "sed failed"
-
-	# for python-exec
-	python_export python${SLOT} EPYTHON PYTHON PYTHON_SITEDIR
-
-	# if not using a cross-compiler, use the fresh binary
-	if ! tc-is-cross-compiler; then
-		local PYTHON=./python \
-			LD_LIBRARY_PATH=${LD_LIBRARY_PATH+${LD_LIBRARY_PATH}:}.
-		export LD_LIBRARY_PATH
-	fi
-
-	echo "EPYTHON='${EPYTHON}'" > epython.py
-	python_domodule epython.py
-}
-
-pkg_preinst() {
-	if has_version "<${CATEGORY}/${PN}-${SLOT}" && ! has_version "${CATEGORY}/${PN}:2.7"; then
-		python_updater_warning="1"
-	fi
-}
-
-eselect_python_update() {
-	[[ -z "${EROOT}" || (! -d "${EROOT}" && -d "${ROOT}") ]] && EROOT="${ROOT%/}${EPREFIX}/"
-
-	if [[ -z "$(eselect python show)" || ! -f "${EROOT}usr/bin/$(eselect python show)" ]]; then
-		eselect python update
-	fi
-
-	if [[ -z "$(eselect python show --python${PV%%.*})" || ! -f "${EROOT}usr/bin/$(eselect python show --python${PV%%.*})" ]]; then
-		eselect python update --python${PV%%.*}
-	fi
-}
-
-pkg_postinst() {
-	eselect_python_update
-
-	if [[ "${python_updater_warning}" == "1" ]]; then
-		ewarn "You have just upgraded from an older version of Python."
-		ewarn "You should switch active version of Python ${PV%%.*} and run"
-		ewarn "'python-updater [options]' to rebuild Python modules."
-	fi
-}
-
-pkg_postrm() {
-	eselect_python_update
-}
diff --git a/dev-lang/python/python-2.7.5-r1.ebuild b/dev-lang/python/python-2.7.5-r1.ebuild
deleted file mode 100644
index 9f7b767ae2db..000000000000
--- a/dev-lang/python/python-2.7.5-r1.ebuild
+++ /dev/null
@@ -1,393 +0,0 @@
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/python-2.7.5-r1.ebuild,v 1.2 2013/08/28 15:59:25 floppym Exp $
-
-EAPI="4"
-WANT_AUTOMAKE="none"
-WANT_LIBTOOL="none"
-
-inherit autotools eutils flag-o-matic multilib pax-utils python-utils-r1 toolchain-funcs multiprocessing
-
-MY_P="Python-${PV}"
-PATCHSET_REVISION="0"
-
-DESCRIPTION="An interpreted, interactive, object-oriented programming language"
-HOMEPAGE="http://www.python.org/"
-SRC_URI="http://www.python.org/ftp/python/${PV}/${MY_P}.tar.xz
-	mirror://gentoo/python-gentoo-patches-${PV}-${PATCHSET_REVISION}.tar.xz"
-
-LICENSE="PSF-2"
-SLOT="2.7"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="-berkdb build doc elibc_uclibc examples gdbm hardened ipv6 +ncurses +readline sqlite +ssl +threads tk +wide-unicode wininst +xml"
-
-# Do not add a dependency on dev-lang/python to this ebuild.
-# If you need to apply a patch which requires python for bootstrapping, please
-# run the bootstrap code on your dev box and include the results in the
-# patchset. See bug 447752.
-
-RDEPEND="app-arch/bzip2
-	>=sys-libs/zlib-1.1.3
-	virtual/libffi
-	virtual/libintl
-	!build? (
-		berkdb? ( || (
-			sys-libs/db:5.3
-			sys-libs/db:5.2
-			sys-libs/db:5.1
-			sys-libs/db:5.0
-			sys-libs/db:4.8
-			sys-libs/db:4.7
-			sys-libs/db:4.6
-			sys-libs/db:4.5
-			sys-libs/db:4.4
-			sys-libs/db:4.3
-			sys-libs/db:4.2
-		) )
-		gdbm? ( sys-libs/gdbm[berkdb] )
-		ncurses? (
-			>=sys-libs/ncurses-5.2
-			readline? ( >=sys-libs/readline-4.1 )
-		)
-		sqlite? ( >=dev-db/sqlite-3.3.8:3 )
-		ssl? ( dev-libs/openssl )
-		tk? (
-			>=dev-lang/tk-8.0
-			dev-tcltk/blt
-		)
-		xml? ( >=dev-libs/expat-2.1 )
-	)
-	!!<sys-apps/portage-2.1.9"
-DEPEND="${RDEPEND}
-	virtual/pkgconfig
-	>=sys-devel/autoconf-2.65
-	!sys-devel/gcc[libffi]"
-RDEPEND+=" !build? ( app-misc/mime-types )
-	doc? ( dev-python/python-docs:${SLOT} )"
-PDEPEND="app-admin/eselect-python
-	app-admin/python-updater"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
-	if use berkdb; then
-		ewarn "'bsddb' module is out-of-date and no longer maintained inside"
-		ewarn "dev-lang/python. 'bsddb' and 'dbhash' modules have been additionally"
-		ewarn "removed in Python 3. A maintained alternative of 'bsddb3' module"
-		ewarn "is provided by dev-python/bsddb3."
-	else
-		if has_version "=${CATEGORY}/${PN}-${PV%%.*}*[berkdb]"; then
-			ewarn "You are migrating from =${CATEGORY}/${PN}-${PV%%.*}*[berkdb]"
-			ewarn "to =${CATEGORY}/${PN}-${PV%%.*}*[-berkdb]."
-			ewarn "You might need to migrate your databases."
-		fi
-	fi
-}
-
-src_prepare() {
-	# Ensure that internal copies of expat, libffi and zlib are not used.
-	rm -r Modules/expat || die
-	rm -r Modules/_ctypes/libffi* || die
-	rm -r Modules/zlib || die
-
-	local excluded_patches
-	if ! tc-is-cross-compiler; then
-		excluded_patches="*_all_crosscompile.patch"
-	fi
-
-	EPATCH_EXCLUDE="${excluded_patches}" EPATCH_SUFFIX="patch" \
-		epatch "${WORKDIR}/${PV}-${PATCHSET_REVISION}"
-
-	epatch "${FILESDIR}/${P}-library-path.patch" #474882
-	epatch "${FILESDIR}/${P}-re_unsigned_ptrdiff.patch" #476426
-
-	sed -i -e "s:@@GENTOO_LIBDIR@@:$(get_libdir):g" \
-		Lib/distutils/command/install.py \
-		Lib/distutils/sysconfig.py \
-		Lib/site.py \
-		Lib/sysconfig.py \
-		Lib/test/test_site.py \
-		Makefile.pre.in \
-		Modules/Setup.dist \
-		Modules/getpath.c \
-		setup.py || die "sed failed to replace @@GENTOO_LIBDIR@@"
-
-	epatch_user
-
-	eautoconf
-	eautoheader
-}
-
-src_configure() {
-	if use build; then
-		# Disable extraneous modules with extra dependencies.
-		export PYTHON_DISABLE_MODULES="dbm _bsddb gdbm _curses _curses_panel readline _sqlite3 _tkinter _elementtree pyexpat"
-		export PYTHON_DISABLE_SSL="1"
-	else
-		# dbm module can be linked against berkdb or gdbm.
-		# Defaults to gdbm when both are enabled, #204343.
-		local disable
-		use berkdb   || use gdbm || disable+=" dbm"
-		use berkdb   || disable+=" _bsddb"
-		use gdbm     || disable+=" gdbm"
-		use ncurses  || disable+=" _curses _curses_panel"
-		use readline || disable+=" readline"
-		use sqlite   || disable+=" _sqlite3"
-		use ssl      || export PYTHON_DISABLE_SSL="1"
-		use tk       || disable+=" _tkinter"
-		use xml      || disable+=" _elementtree pyexpat" # _elementtree uses pyexpat.
-		export PYTHON_DISABLE_MODULES="${disable}"
-
-		if ! use xml; then
-			ewarn "You have configured Python without XML support."
-			ewarn "This is NOT a recommended configuration as you"
-			ewarn "may face problems parsing any XML documents."
-		fi
-	fi
-
-	if [[ -n "${PYTHON_DISABLE_MODULES}" ]]; then
-		einfo "Disabled modules: ${PYTHON_DISABLE_MODULES}"
-	fi
-
-	if [[ "$(gcc-major-version)" -ge 4 ]]; then
-		append-flags -fwrapv
-	fi
-
-	filter-flags -malign-double
-
-	[[ "${ARCH}" == "alpha" ]] && append-flags -fPIC
-
-	# https://bugs.gentoo.org/show_bug.cgi?id=50309
-	if is-flagq -O3; then
-		is-flagq -fstack-protector-all && replace-flags -O3 -O2
-		use hardened && replace-flags -O3 -O2
-	fi
-
-	# Run the configure scripts in parallel.
-	multijob_init
-
-	mkdir -p "${WORKDIR}"/{${CBUILD},${CHOST}}
-
-	if tc-is-cross-compiler; then
-		(
-		multijob_child_init
-		cd "${WORKDIR}"/${CBUILD} >/dev/null
-		OPT="-O1" CFLAGS="" CPPFLAGS="" LDFLAGS="" CC="" \
-		"${S}"/configure \
-			--{build,host}=${CBUILD} \
-			|| die "cross-configure failed"
-		) &
-		multijob_post_fork
-
-		# The configure script assumes it's buggy when cross-compiling.
-		export ac_cv_buggy_getaddrinfo=no
-		export ac_cv_have_long_long_format=yes
-	fi
-
-	# Export CXX so it ends up in /usr/lib/python2.X/config/Makefile.
-	tc-export CXX
-	# The configure script fails to use pkg-config correctly.
-	# http://bugs.python.org/issue15506
-	export ac_cv_path_PKG_CONFIG=$(tc-getPKG_CONFIG)
-
-	# Set LDFLAGS so we link modules with -lpython2.7 correctly.
-	# Needed on FreeBSD unless Python 2.7 is already installed.
-	# Please query BSD team before removing this!
-	append-ldflags "-L."
-
-	local dbmliborder
-	if use gdbm; then
-		dbmliborder+="${dbmliborder:+:}gdbm"
-	fi
-	if use berkdb; then
-		dbmliborder+="${dbmliborder:+:}bdb"
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	ECONF_SOURCE="${S}" OPT="" \
-	econf \
-		--with-fpectl \
-		--enable-shared \
-		$(use_enable ipv6) \
-		$(use_with threads) \
-		$(use wide-unicode && echo "--enable-unicode=ucs4" || echo "--enable-unicode=ucs2") \
-		--infodir='${prefix}/share/info' \
-		--mandir='${prefix}/share/man' \
-		--with-dbmliborder="${dbmliborder}" \
-		--with-libc="" \
-		--enable-loadable-sqlite-extensions \
-		--with-system-expat \
-		--with-system-ffi
-
-	if tc-is-cross-compiler; then
-		# Modify the Makefile.pre so we don't regen for the host/ one.
-		# We need to link the host python programs into $PWD and run
-		# them from here because the distutils sysconfig module will
-		# parse Makefile/etc... from argv[0], and we need it to pick
-		# up the target settings, not the host ones.
-		sed -i \
-			-e '1iHOSTPYTHONPATH = ./hostpythonpath:' \
-			-e '/^HOSTPYTHON/s:=.*:= ./hostpython:' \
-			-e '/^HOSTPGEN/s:=.*:= ./Parser/hostpgen:' \
-			Makefile{.pre,} || die "sed failed"
-	fi
-
-	multijob_finish
-}
-
-src_compile() {
-	if tc-is-cross-compiler; then
-		cd "${WORKDIR}"/${CBUILD}
-		# Disable as many modules as possible -- but we need a few to install.
-		PYTHON_DISABLE_MODULES=$(
-			sed -n "/Extension('/{s:^.*Extension('::;s:'.*::;p}" "${S}"/setup.py | \
-				egrep -v '(unicodedata|time|cStringIO|_struct|binascii)'
-		) \
-		PTHON_DISABLE_SSL="1" \
-		SYSROOT= \
-		emake
-		# See comment in src_configure about these.
-		ln python ../${CHOST}/hostpython || die
-		ln Parser/pgen ../${CHOST}/Parser/hostpgen || die
-		ln -s ../${CBUILD}/build/lib.*/ ../${CHOST}/hostpythonpath || die
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	default
-
-	# Work around bug 329499. See also bug 413751 and 457194.
-	if has_version dev-libs/libffi[pax_kernel]; then
-		pax-mark E python
-	else
-		pax-mark m python
-	fi
-}
-
-src_test() {
-	# Tests will not work when cross compiling.
-	if tc-is-cross-compiler; then
-		elog "Disabling tests due to crosscompiling."
-		return
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-
-	# Skip failing tests.
-	local skipped_tests="distutils gdb"
-
-	for test in ${skipped_tests}; do
-		mv "${S}"/Lib/test/test_${test}.py "${T}"
-	done
-
-	# Rerun failed tests in verbose mode (regrtest -w).
-	emake test EXTRATESTOPTS="-w" < /dev/tty
-	local result="$?"
-
-	for test in ${skipped_tests}; do
-		mv "${T}/test_${test}.py" "${S}"/Lib/test
-	done
-
-	elog "The following tests have been skipped:"
-	for test in ${skipped_tests}; do
-		elog "test_${test}.py"
-	done
-
-	elog "If you would like to run them, you may:"
-	elog "cd '${EPREFIX}/usr/$(get_libdir)/python${SLOT}/test'"
-	elog "and run the tests separately."
-
-	if [[ "${result}" -ne 0 ]]; then
-		die "emake test failed"
-	fi
-}
-
-src_install() {
-	local libdir=${ED}/usr/$(get_libdir)/python${SLOT}
-
-	cd "${WORKDIR}"/${CHOST}
-	emake DESTDIR="${D}" altinstall
-
-	sed -e "s/\(LDFLAGS=\).*/\1/" -i "${libdir}/config/Makefile" || die "sed failed"
-
-	# Backwards compat with Gentoo divergence.
-	dosym python${SLOT}-config /usr/bin/python-config-${SLOT}
-
-	# Fix collisions between different slots of Python.
-	mv "${ED}usr/bin/2to3" "${ED}usr/bin/2to3-${SLOT}"
-	mv "${ED}usr/bin/pydoc" "${ED}usr/bin/pydoc${SLOT}"
-	mv "${ED}usr/bin/idle" "${ED}usr/bin/idle${SLOT}"
-	rm -f "${ED}usr/bin/smtpd.py"
-
-	if use build; then
-		rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{bsddb,dbhash.py,idlelib,lib-tk,sqlite3,test}
-	else
-		use berkdb || rm -r "${libdir}/"{bsddb,dbhash.py,test/test_bsddb*} || die
-		use sqlite || rm -r "${libdir}/"{sqlite3,test/test_sqlite*} || die
-		use tk || rm -r "${ED}usr/bin/idle${SLOT}" "${libdir}/"{idlelib,lib-tk} || die
-		use elibc_uclibc && rm -fr "${libdir}/"{bsddb/test,test}
-	fi
-
-	use threads || rm -r "${libdir}/multiprocessing" || die
-	use wininst || rm -r "${libdir}/distutils/command/"wininst-*.exe || die
-
-	dodoc "${S}"/Misc/{ACKS,HISTORY,NEWS} || die "dodoc failed"
-
-	if use examples; then
-		insinto /usr/share/doc/${PF}/examples
-		doins -r "${S}"/Tools
-	fi
-	insinto /usr/share/gdb/auto-load/usr/$(get_libdir) #443510
-	local libname=$(printf 'e:\n\t@echo $(INSTSONAME)\ninclude Makefile\n' | \
-		emake --no-print-directory -s -f - 2>/dev/null)
-	newins "${S}"/Tools/gdb/libpython.py "${libname}"-gdb.py
-
-	newconfd "${FILESDIR}/pydoc.conf" pydoc-${SLOT}
-	newinitd "${FILESDIR}/pydoc.init" pydoc-${SLOT}
-	sed \
-		-e "s:@PYDOC_PORT_VARIABLE@:PYDOC${SLOT/./_}_PORT:" \
-		-e "s:@PYDOC@:pydoc${SLOT}:" \
-		-i "${ED}etc/conf.d/pydoc-${SLOT}" "${ED}etc/init.d/pydoc-${SLOT}" || die "sed failed"
-
-	# for python-exec
-	python_export python${SLOT} EPYTHON PYTHON PYTHON_SITEDIR
-
-	# if not using a cross-compiler, use the fresh binary
-	if ! tc-is-cross-compiler; then
-		local PYTHON=./python \
-			LD_LIBRARY_PATH=${LD_LIBRARY_PATH+${LD_LIBRARY_PATH}:}.
-		export LD_LIBRARY_PATH
-	fi
-
-	echo "EPYTHON='${EPYTHON}'" > epython.py
-	python_domodule epython.py
-}
-
-pkg_preinst() {
-	if has_version "<${CATEGORY}/${PN}-${SLOT}" && ! has_version "${CATEGORY}/${PN}:2.7"; then
-		python_updater_warning="1"
-	fi
-}
-
-eselect_python_update() {
-	if [[ -z "$(eselect python show)" || ! -f "${EROOT}usr/bin/$(eselect python show)" ]]; then
-		eselect python update
-	fi
-
-	if [[ -z "$(eselect python show --python${PV%%.*})" || ! -f "${EROOT}usr/bin/$(eselect python show --python${PV%%.*})" ]]; then
-		eselect python update --python${PV%%.*}
-	fi
-}
-
-pkg_postinst() {
-	eselect_python_update
-
-	if [[ "${python_updater_warning}" == "1" ]]; then
-		ewarn "You have just upgraded from an older version of Python."
-		ewarn "You should switch active version of Python ${PV%%.*} and run"
-		ewarn "'python-updater [options]' to rebuild Python modules."
-	fi
-}
-
-pkg_postrm() {
-	eselect_python_update
-}
diff --git a/dev-lang/python/python-2.7.5.ebuild b/dev-lang/python/python-2.7.5.ebuild
deleted file mode 100644
index cfb2fb55fcf7..000000000000
--- a/dev-lang/python/python-2.7.5.ebuild
+++ /dev/null
@@ -1,392 +0,0 @@
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/python-2.7.5.ebuild,v 1.14 2013/08/28 15:59:25 floppym Exp $
-
-EAPI="4"
-WANT_AUTOMAKE="none"
-WANT_LIBTOOL="none"
-
-inherit autotools eutils flag-o-matic multilib pax-utils python-utils-r1 toolchain-funcs multiprocessing
-
-MY_P="Python-${PV}"
-PATCHSET_REVISION="0"
-
-DESCRIPTION="An interpreted, interactive, object-oriented programming language"
-HOMEPAGE="http://www.python.org/"
-SRC_URI="http://www.python.org/ftp/python/${PV}/${MY_P}.tar.xz
-	mirror://gentoo/python-gentoo-patches-${PV}-${PATCHSET_REVISION}.tar.xz"
-
-LICENSE="PSF-2"
-SLOT="2.7"
-KEYWORDS="alpha amd64 arm hppa ia64 ~m68k ~mips ppc ppc64 s390 ~sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="-berkdb build doc elibc_uclibc examples gdbm hardened ipv6 +ncurses +readline sqlite +ssl +threads tk +wide-unicode wininst +xml"
-
-# Do not add a dependency on dev-lang/python to this ebuild.
-# If you need to apply a patch which requires python for bootstrapping, please
-# run the bootstrap code on your dev box and include the results in the
-# patchset. See bug 447752.
-
-RDEPEND="app-arch/bzip2
-	>=sys-libs/zlib-1.1.3
-	virtual/libffi
-	virtual/libintl
-	!build? (
-		berkdb? ( || (
-			sys-libs/db:5.3
-			sys-libs/db:5.2
-			sys-libs/db:5.1
-			sys-libs/db:5.0
-			sys-libs/db:4.8
-			sys-libs/db:4.7
-			sys-libs/db:4.6
-			sys-libs/db:4.5
-			sys-libs/db:4.4
-			sys-libs/db:4.3
-			sys-libs/db:4.2
-		) )
-		gdbm? ( sys-libs/gdbm[berkdb] )
-		ncurses? (
-			>=sys-libs/ncurses-5.2
-			readline? ( >=sys-libs/readline-4.1 )
-		)
-		sqlite? ( >=dev-db/sqlite-3.3.8:3 )
-		ssl? ( dev-libs/openssl )
-		tk? (
-			>=dev-lang/tk-8.0
-			dev-tcltk/blt
-		)
-		xml? ( >=dev-libs/expat-2.1 )
-	)
-	!!<sys-apps/portage-2.1.9"
-DEPEND="${RDEPEND}
-	virtual/pkgconfig
-	>=sys-devel/autoconf-2.65
-	!sys-devel/gcc[libffi]"
-RDEPEND+=" !build? ( app-misc/mime-types )
-	doc? ( dev-python/python-docs:${SLOT} )"
-PDEPEND="app-admin/eselect-python
-	app-admin/python-updater"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
-	if use berkdb; then
-		ewarn "'bsddb' module is out-of-date and no longer maintained inside"
-		ewarn "dev-lang/python. 'bsddb' and 'dbhash' modules have been additionally"
-		ewarn "removed in Python 3. A maintained alternative of 'bsddb3' module"
-		ewarn "is provided by dev-python/bsddb3."
-	else
-		if has_version "=${CATEGORY}/${PN}-${PV%%.*}*[berkdb]"; then
-			ewarn "You are migrating from =${CATEGORY}/${PN}-${PV%%.*}*[berkdb]"
-			ewarn "to =${CATEGORY}/${PN}-${PV%%.*}*[-berkdb]."
-			ewarn "You might need to migrate your databases."
-		fi
-	fi
-}
-
-src_prepare() {
-	# Ensure that internal copies of expat, libffi and zlib are not used.
-	rm -r Modules/expat || die
-	rm -r Modules/_ctypes/libffi* || die
-	rm -r Modules/zlib || die
-
-	local excluded_patches
-	if ! tc-is-cross-compiler; then
-		excluded_patches="*_all_crosscompile.patch"
-	fi
-
-	EPATCH_EXCLUDE="${excluded_patches}" EPATCH_SUFFIX="patch" \
-		epatch "${WORKDIR}/${PV}-${PATCHSET_REVISION}"
-
-	epatch "${FILESDIR}/${P}-library-path.patch" #474882
-
-	sed -i -e "s:@@GENTOO_LIBDIR@@:$(get_libdir):g" \
-		Lib/distutils/command/install.py \
-		Lib/distutils/sysconfig.py \
-		Lib/site.py \
-		Lib/sysconfig.py \
-		Lib/test/test_site.py \
-		Makefile.pre.in \
-		Modules/Setup.dist \
-		Modules/getpath.c \
-		setup.py || die "sed failed to replace @@GENTOO_LIBDIR@@"
-
-	epatch_user
-
-	eautoconf
-	eautoheader
-}
-
-src_configure() {
-	if use build; then
-		# Disable extraneous modules with extra dependencies.
-		export PYTHON_DISABLE_MODULES="dbm _bsddb gdbm _curses _curses_panel readline _sqlite3 _tkinter _elementtree pyexpat"
-		export PYTHON_DISABLE_SSL="1"
-	else
-		# dbm module can be linked against berkdb or gdbm.
-		# Defaults to gdbm when both are enabled, #204343.
-		local disable
-		use berkdb   || use gdbm || disable+=" dbm"
-		use berkdb   || disable+=" _bsddb"
-		use gdbm     || disable+=" gdbm"
-		use ncurses  || disable+=" _curses _curses_panel"
-		use readline || disable+=" readline"
-		use sqlite   || disable+=" _sqlite3"
-		use ssl      || export PYTHON_DISABLE_SSL="1"
-		use tk       || disable+=" _tkinter"
-		use xml      || disable+=" _elementtree pyexpat" # _elementtree uses pyexpat.
-		export PYTHON_DISABLE_MODULES="${disable}"
-
-		if ! use xml; then
-			ewarn "You have configured Python without XML support."
-			ewarn "This is NOT a recommended configuration as you"
-			ewarn "may face problems parsing any XML documents."
-		fi
-	fi
-
-	if [[ -n "${PYTHON_DISABLE_MODULES}" ]]; then
-		einfo "Disabled modules: ${PYTHON_DISABLE_MODULES}"
-	fi
-
-	if [[ "$(gcc-major-version)" -ge 4 ]]; then
-		append-flags -fwrapv
-	fi
-
-	filter-flags -malign-double
-
-	[[ "${ARCH}" == "alpha" ]] && append-flags -fPIC
-
-	# https://bugs.gentoo.org/show_bug.cgi?id=50309
-	if is-flagq -O3; then
-		is-flagq -fstack-protector-all && replace-flags -O3 -O2
-		use hardened && replace-flags -O3 -O2
-	fi
-
-	# Run the configure scripts in parallel.
-	multijob_init
-
-	mkdir -p "${WORKDIR}"/{${CBUILD},${CHOST}}
-
-	if tc-is-cross-compiler; then
-		(
-		multijob_child_init
-		cd "${WORKDIR}"/${CBUILD} >/dev/null
-		OPT="-O1" CFLAGS="" CPPFLAGS="" LDFLAGS="" CC="" \
-		"${S}"/configure \
-			--{build,host}=${CBUILD} \
-			|| die "cross-configure failed"
-		) &
-		multijob_post_fork
-
-		# The configure script assumes it's buggy when cross-compiling.
-		export ac_cv_buggy_getaddrinfo=no
-		export ac_cv_have_long_long_format=yes
-	fi
-
-	# Export CXX so it ends up in /usr/lib/python2.X/config/Makefile.
-	tc-export CXX
-	# The configure script fails to use pkg-config correctly.
-	# http://bugs.python.org/issue15506
-	export ac_cv_path_PKG_CONFIG=$(tc-getPKG_CONFIG)
-
-	# Set LDFLAGS so we link modules with -lpython2.7 correctly.
-	# Needed on FreeBSD unless Python 2.7 is already installed.
-	# Please query BSD team before removing this!
-	append-ldflags "-L."
-
-	local dbmliborder
-	if use gdbm; then
-		dbmliborder+="${dbmliborder:+:}gdbm"
-	fi
-	if use berkdb; then
-		dbmliborder+="${dbmliborder:+:}bdb"
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	ECONF_SOURCE="${S}" OPT="" \
-	econf \
-		--with-fpectl \
-		--enable-shared \
-		$(use_enable ipv6) \
-		$(use_with threads) \
-		$(use wide-unicode && echo "--enable-unicode=ucs4" || echo "--enable-unicode=ucs2") \
-		--infodir='${prefix}/share/info' \
-		--mandir='${prefix}/share/man' \
-		--with-dbmliborder="${dbmliborder}" \
-		--with-libc="" \
-		--enable-loadable-sqlite-extensions \
-		--with-system-expat \
-		--with-system-ffi
-
-	if tc-is-cross-compiler; then
-		# Modify the Makefile.pre so we don't regen for the host/ one.
-		# We need to link the host python programs into $PWD and run
-		# them from here because the distutils sysconfig module will
-		# parse Makefile/etc... from argv[0], and we need it to pick
-		# up the target settings, not the host ones.
-		sed -i \
-			-e '1iHOSTPYTHONPATH = ./hostpythonpath:' \
-			-e '/^HOSTPYTHON/s:=.*:= ./hostpython:' \
-			-e '/^HOSTPGEN/s:=.*:= ./Parser/hostpgen:' \
-			Makefile{.pre,} || die "sed failed"
-	fi
-
-	multijob_finish
-}
-
-src_compile() {
-	if tc-is-cross-compiler; then
-		cd "${WORKDIR}"/${CBUILD}
-		# Disable as many modules as possible -- but we need a few to install.
-		PYTHON_DISABLE_MODULES=$(
-			sed -n "/Extension('/{s:^.*Extension('::;s:'.*::;p}" "${S}"/setup.py | \
-				egrep -v '(unicodedata|time|cStringIO|_struct|binascii)'
-		) \
-		PTHON_DISABLE_SSL="1" \
-		SYSROOT= \
-		emake
-		# See comment in src_configure about these.
-		ln python ../${CHOST}/hostpython || die
-		ln Parser/pgen ../${CHOST}/Parser/hostpgen || die
-		ln -s ../${CBUILD}/build/lib.*/ ../${CHOST}/hostpythonpath || die
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	default
-
-	# Work around bug 329499. See also bug 413751 and 457194.
-	if has_version dev-libs/libffi[pax_kernel]; then
-		pax-mark E python
-	else
-		pax-mark m python
-	fi
-}
-
-src_test() {
-	# Tests will not work when cross compiling.
-	if tc-is-cross-compiler; then
-		elog "Disabling tests due to crosscompiling."
-		return
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-
-	# Skip failing tests.
-	local skipped_tests="distutils gdb"
-
-	for test in ${skipped_tests}; do
-		mv "${S}"/Lib/test/test_${test}.py "${T}"
-	done
-
-	# Rerun failed tests in verbose mode (regrtest -w).
-	emake test EXTRATESTOPTS="-w" < /dev/tty
-	local result="$?"
-
-	for test in ${skipped_tests}; do
-		mv "${T}/test_${test}.py" "${S}"/Lib/test
-	done
-
-	elog "The following tests have been skipped:"
-	for test in ${skipped_tests}; do
-		elog "test_${test}.py"
-	done
-
-	elog "If you would like to run them, you may:"
-	elog "cd '${EPREFIX}/usr/$(get_libdir)/python${SLOT}/test'"
-	elog "and run the tests separately."
-
-	if [[ "${result}" -ne 0 ]]; then
-		die "emake test failed"
-	fi
-}
-
-src_install() {
-	local libdir=${ED}/usr/$(get_libdir)/python${SLOT}
-
-	cd "${WORKDIR}"/${CHOST}
-	emake DESTDIR="${D}" altinstall
-
-	sed -e "s/\(LDFLAGS=\).*/\1/" -i "${libdir}/config/Makefile" || die "sed failed"
-
-	# Backwards compat with Gentoo divergence.
-	dosym python${SLOT}-config /usr/bin/python-config-${SLOT}
-
-	# Fix collisions between different slots of Python.
-	mv "${ED}usr/bin/2to3" "${ED}usr/bin/2to3-${SLOT}"
-	mv "${ED}usr/bin/pydoc" "${ED}usr/bin/pydoc${SLOT}"
-	mv "${ED}usr/bin/idle" "${ED}usr/bin/idle${SLOT}"
-	rm -f "${ED}usr/bin/smtpd.py"
-
-	if use build; then
-		rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{bsddb,dbhash.py,idlelib,lib-tk,sqlite3,test}
-	else
-		use berkdb || rm -r "${libdir}/"{bsddb,dbhash.py,test/test_bsddb*} || die
-		use sqlite || rm -r "${libdir}/"{sqlite3,test/test_sqlite*} || die
-		use tk || rm -r "${ED}usr/bin/idle${SLOT}" "${libdir}/"{idlelib,lib-tk} || die
-		use elibc_uclibc && rm -fr "${libdir}/"{bsddb/test,test}
-	fi
-
-	use threads || rm -r "${libdir}/multiprocessing" || die
-	use wininst || rm -r "${libdir}/distutils/command/"wininst-*.exe || die
-
-	dodoc "${S}"/Misc/{ACKS,HISTORY,NEWS} || die "dodoc failed"
-
-	if use examples; then
-		insinto /usr/share/doc/${PF}/examples
-		doins -r "${S}"/Tools
-	fi
-	insinto /usr/share/gdb/auto-load/usr/$(get_libdir) #443510
-	local libname=$(printf 'e:\n\t@echo $(INSTSONAME)\ninclude Makefile\n' | \
-		emake --no-print-directory -s -f - 2>/dev/null)
-	newins "${S}"/Tools/gdb/libpython.py "${libname}"-gdb.py
-
-	newconfd "${FILESDIR}/pydoc.conf" pydoc-${SLOT}
-	newinitd "${FILESDIR}/pydoc.init" pydoc-${SLOT}
-	sed \
-		-e "s:@PYDOC_PORT_VARIABLE@:PYDOC${SLOT/./_}_PORT:" \
-		-e "s:@PYDOC@:pydoc${SLOT}:" \
-		-i "${ED}etc/conf.d/pydoc-${SLOT}" "${ED}etc/init.d/pydoc-${SLOT}" || die "sed failed"
-
-	# for python-exec
-	python_export python${SLOT} EPYTHON PYTHON PYTHON_SITEDIR
-
-	# if not using a cross-compiler, use the fresh binary
-	if ! tc-is-cross-compiler; then
-		local PYTHON=./python \
-			LD_LIBRARY_PATH=${LD_LIBRARY_PATH+${LD_LIBRARY_PATH}:}.
-		export LD_LIBRARY_PATH
-	fi
-
-	echo "EPYTHON='${EPYTHON}'" > epython.py
-	python_domodule epython.py
-}
-
-pkg_preinst() {
-	if has_version "<${CATEGORY}/${PN}-${SLOT}" && ! has_version "${CATEGORY}/${PN}:2.7"; then
-		python_updater_warning="1"
-	fi
-}
-
-eselect_python_update() {
-	if [[ -z "$(eselect python show)" || ! -f "${EROOT}usr/bin/$(eselect python show)" ]]; then
-		eselect python update
-	fi
-
-	if [[ -z "$(eselect python show --python${PV%%.*})" || ! -f "${EROOT}usr/bin/$(eselect python show --python${PV%%.*})" ]]; then
-		eselect python update --python${PV%%.*}
-	fi
-}
-
-pkg_postinst() {
-	eselect_python_update
-
-	if [[ "${python_updater_warning}" == "1" ]]; then
-		ewarn "You have just upgraded from an older version of Python."
-		ewarn "You should switch active version of Python ${PV%%.*} and run"
-		ewarn "'python-updater [options]' to rebuild Python modules."
-	fi
-}
-
-pkg_postrm() {
-	eselect_python_update
-}
diff --git a/dev-lang/python/python-3.2.3-r1.ebuild b/dev-lang/python/python-3.2.3-r1.ebuild
deleted file mode 100644
index 0dbdb817a11b..000000000000
--- a/dev-lang/python/python-3.2.3-r1.ebuild
+++ /dev/null
@@ -1,307 +0,0 @@
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/python-3.2.3-r1.ebuild,v 1.13 2013/08/28 15:59:25 floppym Exp $
-
-EAPI="3"
-WANT_AUTOMAKE="none"
-WANT_LIBTOOL="none"
-
-inherit autotools eutils flag-o-matic multilib pax-utils python toolchain-funcs
-
-MY_P="Python-${PV}"
-PATCHSET_REVISION="0"
-
-DESCRIPTION="Python is an interpreted, interactive, object-oriented programming language."
-HOMEPAGE="http://www.python.org/"
-SRC_URI="http://www.python.org/ftp/python/${PV}/${MY_P}.tar.xz
-	mirror://gentoo/python-gentoo-patches-${PV}-${PATCHSET_REVISION}.tar.bz2"
-
-LICENSE="PSF-2"
-SLOT="3.2"
-PYTHON_ABI="${SLOT}"
-KEYWORDS="alpha ~amd64 ~arm hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="build doc elibc_uclibc examples gdbm hardened ipv6 +ncurses +readline sqlite +ssl +threads tk +wide-unicode wininst +xml"
-
-RDEPEND="app-arch/bzip2
-		>=sys-libs/zlib-1.1.3
-		virtual/libffi
-		virtual/libintl
-		!build? (
-			gdbm? ( sys-libs/gdbm[berkdb] )
-			ncurses? (
-				>=sys-libs/ncurses-5.2
-				readline? ( >=sys-libs/readline-4.1 )
-			)
-			sqlite? ( >=dev-db/sqlite-3.3.8:3 )
-			ssl? ( dev-libs/openssl )
-			tk? (
-				>=dev-lang/tk-8.0
-				dev-tcltk/blt
-			)
-			xml? ( >=dev-libs/expat-2.1 )
-		)"
-DEPEND="${RDEPEND}
-		virtual/pkgconfig
-		>=sys-devel/autoconf-2.65
-		!sys-devel/gcc[libffi]"
-RDEPEND+=" !build? ( app-misc/mime-types )
-	doc? ( dev-python/python-docs:${SLOT} )"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
-	python_pkg_setup
-
-	if [[ "${PV}" =~ ^3\.2(\.[1234])?(_pre)? ]]; then
-		rm -f "${EROOT}usr/$(get_libdir)/llibpython3.so"
-	else
-		die "Deprecated code not deleted"
-	fi
-}
-
-src_prepare() {
-	# Ensure that internal copies of expat, libffi and zlib are not used.
-	rm -fr Modules/expat
-	rm -fr Modules/_ctypes/libffi*
-	rm -fr Modules/zlib
-
-	local excluded_patches
-	if ! tc-is-cross-compiler; then
-		excluded_patches="*_all_crosscompile.patch"
-	fi
-
-	EPATCH_EXCLUDE="${excluded_patches}" EPATCH_SUFFIX="patch" \
-		epatch "${WORKDIR}/${PV}-${PATCHSET_REVISION}"
-	epatch "${FILESDIR}"/${PN}-3.2.3-x32.patch
-
-	sed -i -e "s:@@GENTOO_LIBDIR@@:$(get_libdir):g" \
-		Lib/distutils/command/install.py \
-		Lib/distutils/sysconfig.py \
-		Lib/site.py \
-		Lib/sysconfig.py \
-		Lib/test/test_site.py \
-		Makefile.pre.in \
-		Modules/Setup.dist \
-		Modules/getpath.c \
-		setup.py || die "sed failed to replace @@GENTOO_LIBDIR@@"
-
-	# Disable ABI flags.
-	sed -e "s/ABIFLAGS=\"\${ABIFLAGS}.*\"/:/" -i configure.in || die "sed failed"
-
-	eautoconf
-	eautoheader
-}
-
-src_configure() {
-	if use build; then
-		# Disable extraneous modules with extra dependencies.
-		export PYTHON_DISABLE_MODULES="gdbm _curses _curses_panel readline _sqlite3 _tkinter _elementtree pyexpat"
-		export PYTHON_DISABLE_SSL="1"
-	else
-		local disable
-		use gdbm     || disable+=" gdbm"
-		use ncurses  || disable+=" _curses _curses_panel"
-		use readline || disable+=" readline"
-		use sqlite   || disable+=" _sqlite3"
-		use ssl      || export PYTHON_DISABLE_SSL="1"
-		use tk       || disable+=" _tkinter"
-		use xml      || disable+=" _elementtree pyexpat" # _elementtree uses pyexpat.
-		export PYTHON_DISABLE_MODULES="${disable}"
-
-		if ! use xml; then
-			ewarn "You have configured Python without XML support."
-			ewarn "This is NOT a recommended configuration as you"
-			ewarn "may face problems parsing any XML documents."
-		fi
-	fi
-
-	if [[ -n "${PYTHON_DISABLE_MODULES}" ]]; then
-		einfo "Disabled modules: ${PYTHON_DISABLE_MODULES}"
-	fi
-
-	if [[ "$(gcc-major-version)" -ge 4 ]]; then
-		append-flags -fwrapv
-	fi
-
-	filter-flags -malign-double
-
-	[[ "${ARCH}" == "alpha" ]] && append-flags -fPIC
-
-	# https://bugs.gentoo.org/show_bug.cgi?id=50309
-	if is-flagq -O3; then
-		is-flagq -fstack-protector-all && replace-flags -O3 -O2
-		use hardened && replace-flags -O3 -O2
-	fi
-
-	if tc-is-cross-compiler; then
-		OPT="-O1" CFLAGS="" LDFLAGS="" CC="" \
-		./configure --{build,host}=${CBUILD} || die "cross-configure failed"
-		emake python Parser/pgen || die "cross-make failed"
-		mv python hostpython
-		mv Parser/pgen Parser/hostpgen
-		make distclean
-		sed -i \
-			-e "/^HOSTPYTHON/s:=.*:=./hostpython:" \
-			-e "/^HOSTPGEN/s:=.*:=./Parser/hostpgen:" \
-			Makefile.pre.in || die "sed failed"
-
-		# The configure script assumes it's buggy when cross-compiling.
-		export ac_cv_buggy_getaddrinfo=no
-		export ac_cv_have_long_long_format=yes
-	fi
-
-	# Export CXX so it ends up in /usr/lib/python3.X/config/Makefile.
-	tc-export CXX
-	# The configure script fails to use pkg-config correctly.
-	# http://bugs.python.org/issue15506
-	export ac_cv_path_PKG_CONFIG=$(tc-getPKG_CONFIG)
-
-	# Set LDFLAGS so we link modules with -lpython3.2 correctly.
-	# Needed on FreeBSD unless Python 3.2 is already installed.
-	# Please query BSD team before removing this!
-	append-ldflags "-L."
-
-	local dbmliborder
-	if use gdbm; then
-		dbmliborder+="${dbmliborder:+:}gdbm"
-	fi
-
-	OPT="" econf \
-		--with-fpectl \
-		--enable-shared \
-		$(use_enable ipv6) \
-		$(use_with threads) \
-		$(use_with wide-unicode) \
-		--infodir='${prefix}/share/info' \
-		--mandir='${prefix}/share/man' \
-		--with-computed-gotos \
-		--with-dbmliborder="${dbmliborder}" \
-		--with-libc="" \
-		--enable-loadable-sqlite-extensions \
-		--with-system-expat \
-		--with-system-ffi
-}
-
-src_compile() {
-	emake CPPFLAGS="" CFLAGS="" LDFLAGS="" || die "emake failed"
-
-	# Work around bug 329499. See also bug 413751.
-	pax-mark m python
-}
-
-src_test() {
-	# Tests will not work when cross compiling.
-	if tc-is-cross-compiler; then
-		elog "Disabling tests due to crosscompiling."
-		return
-	fi
-
-	# Byte compiling should be enabled here.
-	# Otherwise test_import fails.
-	python_enable_pyc
-
-	# Skip failing tests.
-	local skipped_tests="gdb"
-
-	for test in ${skipped_tests}; do
-		mv Lib/test/test_${test}.py "${T}"
-	done
-
-	# Rerun failed tests in verbose mode (regrtest -w).
-	emake test EXTRATESTOPTS="-w" CPPFLAGS="" CFLAGS="" LDFLAGS="" < /dev/tty
-	local result="$?"
-
-	for test in ${skipped_tests}; do
-		mv "${T}/test_${test}.py" Lib/test
-	done
-
-	elog "The following tests have been skipped:"
-	for test in ${skipped_tests}; do
-		elog "test_${test}.py"
-	done
-
-	elog "If you would like to run them, you may:"
-	elog "cd '${EPREFIX}$(python_get_libdir)/test'"
-	elog "and run the tests separately."
-
-	python_disable_pyc
-
-	if [[ "${result}" -ne 0 ]]; then
-		die "emake test failed"
-	fi
-}
-
-src_install() {
-	emake DESTDIR="${D}" altinstall || die "emake altinstall failed"
-	python_clean_installation_image -q
-
-	sed \
-		-e "s/\(CONFIGURE_LDFLAGS=\).*/\1/" \
-		-e "s/\(PY_LDFLAGS=\).*/\1/" \
-		-i "${ED}$(python_get_libdir)/config-${SLOT}/Makefile" || die "sed failed"
-
-	mv "${ED}usr/bin/python${SLOT}-config" "${ED}usr/bin/python-config-${SLOT}"
-
-	# Fix collisions between different slots of Python.
-	rm -f "${ED}usr/$(get_libdir)/libpython3.so"
-
-	if use build; then
-		rm -fr "${ED}usr/bin/idle${SLOT}" "${ED}$(python_get_libdir)/"{idlelib,sqlite3,test,tkinter}
-	else
-		use elibc_uclibc && rm -fr "${ED}$(python_get_libdir)/test"
-		use sqlite || rm -fr "${ED}$(python_get_libdir)/"{sqlite3,test/test_sqlite*}
-		use tk || rm -fr "${ED}usr/bin/idle${SLOT}" "${ED}$(python_get_libdir)/"{idlelib,tkinter,test/test_tk*}
-	fi
-
-	use threads || rm -fr "${ED}$(python_get_libdir)/multiprocessing"
-	use wininst || rm -f "${ED}$(python_get_libdir)/distutils/command/"wininst-*.exe
-
-	dodoc Misc/{ACKS,HISTORY,NEWS} || die "dodoc failed"
-
-	if use examples; then
-		insinto /usr/share/doc/${PF}/examples
-		find Tools -name __pycache__ -print0 | xargs -0 rm -fr
-		doins -r Tools || die "doins failed"
-	fi
-
-	newconfd "${FILESDIR}/pydoc.conf" pydoc-${SLOT} || die "newconfd failed"
-	newinitd "${FILESDIR}/pydoc.init" pydoc-${SLOT} || die "newinitd failed"
-	sed \
-		-e "s:@PYDOC_PORT_VARIABLE@:PYDOC${SLOT/./_}_PORT:" \
-		-e "s:@PYDOC@:pydoc${SLOT}:" \
-		-i "${ED}etc/conf.d/pydoc-${SLOT}" "${ED}etc/init.d/pydoc-${SLOT}" || die "sed failed"
-}
-
-pkg_preinst() {
-	if has_version "<${CATEGORY}/${PN}-${SLOT}" && ! has_version ">=${CATEGORY}/${PN}-${SLOT}_alpha"; then
-		python_updater_warning="1"
-	fi
-}
-
-eselect_python_update() {
-	if [[ -z "$(eselect python show)" || ! -f "${EROOT}usr/bin/$(eselect python show)" ]]; then
-		eselect python update
-	fi
-
-	if [[ -z "$(eselect python show --python${PV%%.*})" || ! -f "${EROOT}usr/bin/$(eselect python show --python${PV%%.*})" ]]; then
-		eselect python update --python${PV%%.*}
-	fi
-}
-
-pkg_postinst() {
-	eselect_python_update
-
-	python_mod_optimize -f -x "/(site-packages|test|tests)/" $(python_get_libdir)
-
-	if [[ "${python_updater_warning}" == "1" ]]; then
-		ewarn "You have just upgraded from an older version of Python."
-		ewarn "You should switch active version of Python ${PV%%.*} and run"
-		ewarn "'python-updater [options]' to rebuild Python modules."
-	fi
-}
-
-pkg_postrm() {
-	eselect_python_update
-
-	python_mod_cleanup $(python_get_libdir)
-}
diff --git a/dev-lang/python/python-3.2.3-r2.ebuild b/dev-lang/python/python-3.2.3-r2.ebuild
deleted file mode 100644
index fa272132fef9..000000000000
--- a/dev-lang/python/python-3.2.3-r2.ebuild
+++ /dev/null
@@ -1,361 +0,0 @@
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/python-3.2.3-r2.ebuild,v 1.23 2013/08/28 15:59:25 floppym Exp $
-
-EAPI="3"
-WANT_AUTOMAKE="none"
-WANT_LIBTOOL="none"
-
-inherit autotools eutils flag-o-matic multilib pax-utils python-utils-r1 toolchain-funcs multiprocessing
-
-MY_P="Python-${PV}"
-PATCHSET_REVISION="0"
-
-DESCRIPTION="An interpreted, interactive, object-oriented programming language"
-HOMEPAGE="http://www.python.org/"
-SRC_URI="http://www.python.org/ftp/python/${PV}/${MY_P}.tar.xz
-	mirror://gentoo/python-gentoo-patches-${PV}-${PATCHSET_REVISION}.tar.bz2"
-
-LICENSE="PSF-2"
-SLOT="3.2"
-KEYWORDS="alpha amd64 arm hppa ia64 ~m68k ~mips ppc ppc64 s390 sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="build doc elibc_uclibc examples gdbm hardened ipv6 +ncurses +readline sqlite +ssl +threads tk +wide-unicode wininst +xml"
-
-# Do not add a dependency on dev-lang/python to this ebuild.
-# If you need to apply a patch which requires python for bootstrapping, please
-# run the bootstrap code on your dev box and include the results in the
-# patchset. See bug 447752.
-
-RDEPEND="app-arch/bzip2
-	>=sys-libs/zlib-1.1.3
-	virtual/libffi
-	virtual/libintl
-	!build? (
-		gdbm? ( sys-libs/gdbm[berkdb] )
-		ncurses? (
-			>=sys-libs/ncurses-5.2
-			readline? ( >=sys-libs/readline-4.1 )
-		)
-		sqlite? ( >=dev-db/sqlite-3.3.8:3 )
-		ssl? ( dev-libs/openssl )
-		tk? (
-			>=dev-lang/tk-8.0
-			dev-tcltk/blt
-		)
-		xml? ( >=dev-libs/expat-2.1 )
-	)"
-DEPEND="${RDEPEND}
-	virtual/pkgconfig
-	>=sys-devel/autoconf-2.65
-	!sys-devel/gcc[libffi]"
-RDEPEND+=" !build? ( app-misc/mime-types )
-	doc? ( dev-python/python-docs:${SLOT} )"
-PDEPEND="app-admin/eselect-python
-	app-admin/python-updater"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
-	if [[ "${PV}" =~ ^3\.2(\.[1234])?(_pre)? ]]; then
-		rm -f "${EROOT}usr/$(get_libdir)/llibpython3.so"
-	else
-		die "Deprecated code not deleted"
-	fi
-}
-
-src_prepare() {
-	# Ensure that internal copies of expat, libffi and zlib are not used.
-	rm -fr Modules/expat
-	rm -fr Modules/_ctypes/libffi*
-	rm -fr Modules/zlib
-
-	local excluded_patches
-	if ! tc-is-cross-compiler; then
-		excluded_patches="*_all_crosscompile.patch"
-	fi
-
-	EPATCH_EXCLUDE="${excluded_patches}" EPATCH_SUFFIX="patch" \
-		epatch "${WORKDIR}/${PV}-${PATCHSET_REVISION}"
-	epatch "${FILESDIR}"/${PN}-3.2.3-x32.patch
-
-	sed -i -e "s:@@GENTOO_LIBDIR@@:$(get_libdir):g" \
-		Lib/distutils/command/install.py \
-		Lib/distutils/sysconfig.py \
-		Lib/site.py \
-		Lib/sysconfig.py \
-		Lib/test/test_site.py \
-		Makefile.pre.in \
-		Modules/Setup.dist \
-		Modules/getpath.c \
-		setup.py || die "sed failed to replace @@GENTOO_LIBDIR@@"
-
-	# Disable ABI flags.
-	sed -e "s/ABIFLAGS=\"\${ABIFLAGS}.*\"/:/" -i configure.in || die "sed failed"
-
-	eautoconf
-	eautoheader
-}
-
-src_configure() {
-	if use build; then
-		# Disable extraneous modules with extra dependencies.
-		export PYTHON_DISABLE_MODULES="gdbm _curses _curses_panel readline _sqlite3 _tkinter _elementtree pyexpat"
-		export PYTHON_DISABLE_SSL="1"
-	else
-		local disable
-		use gdbm     || disable+=" gdbm"
-		use ncurses  || disable+=" _curses _curses_panel"
-		use readline || disable+=" readline"
-		use sqlite   || disable+=" _sqlite3"
-		use ssl      || export PYTHON_DISABLE_SSL="1"
-		use tk       || disable+=" _tkinter"
-		use xml      || disable+=" _elementtree pyexpat" # _elementtree uses pyexpat.
-		export PYTHON_DISABLE_MODULES="${disable}"
-
-		if ! use xml; then
-			ewarn "You have configured Python without XML support."
-			ewarn "This is NOT a recommended configuration as you"
-			ewarn "may face problems parsing any XML documents."
-		fi
-	fi
-
-	if [[ -n "${PYTHON_DISABLE_MODULES}" ]]; then
-		einfo "Disabled modules: ${PYTHON_DISABLE_MODULES}"
-	fi
-
-	if [[ "$(gcc-major-version)" -ge 4 ]]; then
-		append-flags -fwrapv
-	fi
-
-	filter-flags -malign-double
-
-	[[ "${ARCH}" == "alpha" ]] && append-flags -fPIC
-
-	# https://bugs.gentoo.org/show_bug.cgi?id=50309
-	if is-flagq -O3; then
-		is-flagq -fstack-protector-all && replace-flags -O3 -O2
-		use hardened && replace-flags -O3 -O2
-	fi
-
-	# Run the configure scripts in parallel.
-	multijob_init
-
-	mkdir -p "${WORKDIR}"/{${CBUILD},${CHOST}}
-
-	if tc-is-cross-compiler; then
-		(
-		multijob_child_init
-		cd "${WORKDIR}"/${CBUILD} >/dev/null
-		OPT="-O1" CFLAGS="" CPPFLAGS="" LDFLAGS="" CC="" \
-		"${S}"/configure \
-			--{build,host}=${CBUILD} \
-			|| die "cross-configure failed"
-		) &
-		multijob_post_fork
-
-		# The configure script assumes it's buggy when cross-compiling.
-		export ac_cv_buggy_getaddrinfo=no
-		export ac_cv_have_long_long_format=yes
-	fi
-
-	# Export CXX so it ends up in /usr/lib/python3.X/config/Makefile.
-	tc-export CXX
-	# The configure script fails to use pkg-config correctly.
-	# http://bugs.python.org/issue15506
-	export ac_cv_path_PKG_CONFIG=$(tc-getPKG_CONFIG)
-
-	# Set LDFLAGS so we link modules with -lpython3.2 correctly.
-	# Needed on FreeBSD unless Python 3.2 is already installed.
-	# Please query BSD team before removing this!
-	append-ldflags "-L."
-
-	local dbmliborder
-	if use gdbm; then
-		dbmliborder+="${dbmliborder:+:}gdbm"
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	ECONF_SOURCE=${S} OPT="" \
-	econf \
-		--with-fpectl \
-		--enable-shared \
-		$(use_enable ipv6) \
-		$(use_with threads) \
-		$(use_with wide-unicode) \
-		--infodir='${prefix}/share/info' \
-		--mandir='${prefix}/share/man' \
-		--with-computed-gotos \
-		--with-dbmliborder="${dbmliborder}" \
-		--with-libc="" \
-		--enable-loadable-sqlite-extensions \
-		--with-system-expat \
-		--with-system-ffi
-
-	if tc-is-cross-compiler; then
-		# Modify the Makefile.pre so we don't regen for the host/ one.
-		# We need to link the host python programs into $PWD and run
-		# them from here because the distutils sysconfig module will
-		# parse Makefile/etc... from argv[0], and we need it to pick
-		# up the target settings, not the host ones.
-		sed -i \
-			-e '1iHOSTPYTHONPATH = ./hostpythonpath:' \
-			-e '/^HOSTPYTHON/s:=.*:= ./hostpython:' \
-			-e '/^HOSTPGEN/s:=.*:= ./Parser/hostpgen:' \
-			Makefile{.pre,} || die "sed failed"
-	fi
-
-	multijob_finish
-}
-
-src_compile() {
-	if tc-is-cross-compiler; then
-		cd "${WORKDIR}"/${CBUILD}
-		# Disable as many modules as possible -- but we need a few to install.
-		PYTHON_DISABLE_MODULES=$(
-			sed -n "/Extension('/{s:^.*Extension('::;s:'.*::;p}" "${S}"/setup.py | \
-				egrep -v '(unicodedata|time|cStringIO|_struct|binascii)'
-		) \
-		PTHON_DISABLE_SSL="1" \
-		SYSROOT= \
-		emake || die "cross-make failed"
-		# See comment in src_configure about these.
-		ln python ../${CHOST}/hostpython || die
-		ln Parser/pgen ../${CHOST}/Parser/hostpgen || die
-		ln -s ../${CBUILD}/build/lib.*/ ../${CHOST}/hostpythonpath || die
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	emake CPPFLAGS="" CFLAGS="" LDFLAGS="" || die "emake failed"
-
-	# Work around bug 329499. See also bug 413751.
-	pax-mark m python
-}
-
-src_test() {
-	# Tests will not work when cross compiling.
-	if tc-is-cross-compiler; then
-		elog "Disabling tests due to crosscompiling."
-		return
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-
-	# Skip failing tests.
-	local skipped_tests="gdb"
-
-	for test in ${skipped_tests}; do
-		mv "${S}"/Lib/test/test_${test}.py "${T}"
-	done
-
-	# Rerun failed tests in verbose mode (regrtest -w).
-	PYTHONDONTWRITEBYTECODE="" emake test EXTRATESTOPTS="-w" CPPFLAGS="" CFLAGS="" LDFLAGS="" < /dev/tty
-	local result="$?"
-
-	for test in ${skipped_tests}; do
-		mv "${T}/test_${test}.py" "${S}"/Lib/test
-	done
-
-	elog "The following tests have been skipped:"
-	for test in ${skipped_tests}; do
-		elog "test_${test}.py"
-	done
-
-	elog "If you would like to run them, you may:"
-	elog "cd '${EPREFIX}/usr/$(get_libdir)/python${SLOT}/test'"
-	elog "and run the tests separately."
-
-	if [[ "${result}" -ne 0 ]]; then
-		die "emake test failed"
-	fi
-}
-
-src_install() {
-	local libdir=${ED}/usr/$(get_libdir)/python${SLOT}
-
-	cd "${WORKDIR}"/${CHOST}
-	emake DESTDIR="${D}" altinstall || die "emake altinstall failed"
-
-	sed \
-		-e "s/\(CONFIGURE_LDFLAGS=\).*/\1/" \
-		-e "s/\(PY_LDFLAGS=\).*/\1/" \
-		-i "${libdir}/config-${SLOT}/Makefile" || die "sed failed"
-
-	# Backwards compat with Gentoo divergence.
-	dosym python${SLOT}-config /usr/bin/python-config-${SLOT} || die
-
-	# Fix collisions between different slots of Python.
-	rm -f "${ED}usr/$(get_libdir)/libpython3.so"
-
-	if use build; then
-		rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{idlelib,sqlite3,test,tkinter}
-	else
-		use elibc_uclibc && rm -fr "${libdir}/test"
-		use sqlite || rm -fr "${libdir}/"{sqlite3,test/test_sqlite*}
-		use tk || rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{idlelib,tkinter,test/test_tk*}
-	fi
-
-	use threads || rm -fr "${libdir}/multiprocessing"
-	use wininst || rm -f "${libdir}/distutils/command/"wininst-*.exe
-
-	dodoc "${S}"/Misc/{ACKS,HISTORY,NEWS} || die "dodoc failed"
-
-	if use examples; then
-		insinto /usr/share/doc/${PF}/examples
-		find "${S}"/Tools -name __pycache__ -print0 | xargs -0 rm -fr
-		doins -r "${S}"/Tools || die "doins failed"
-	fi
-	insinto /usr/share/gdb/auto-load/usr/$(get_libdir) #443510
-	local libname=$(printf 'e:\n\t@echo $(INSTSONAME)\ninclude Makefile\n' | \
-		emake --no-print-directory -s -f - 2>/dev/null)
-	newins "${S}"/Tools/gdb/libpython.py "${libname}"-gdb.py
-
-	newconfd "${FILESDIR}/pydoc.conf" pydoc-${SLOT} || die "newconfd failed"
-	newinitd "${FILESDIR}/pydoc.init" pydoc-${SLOT} || die "newinitd failed"
-	sed \
-		-e "s:@PYDOC_PORT_VARIABLE@:PYDOC${SLOT/./_}_PORT:" \
-		-e "s:@PYDOC@:pydoc${SLOT}:" \
-		-i "${ED}etc/conf.d/pydoc-${SLOT}" "${ED}etc/init.d/pydoc-${SLOT}" || die "sed failed"
-
-	# for python-exec
-	python_export python${SLOT} EPYTHON PYTHON PYTHON_SITEDIR
-
-	# if not using a cross-compiler, use the fresh binary
-	if ! tc-is-cross-compiler; then
-		local PYTHON=./python \
-			LD_LIBRARY_PATH=${LD_LIBRARY_PATH+${LD_LIBRARY_PATH}:}.
-		export LD_LIBRARY_PATH
-	fi
-
-	echo "EPYTHON='${EPYTHON}'" > epython.py
-	python_domodule epython.py
-}
-
-pkg_preinst() {
-	if has_version "<${CATEGORY}/${PN}-${SLOT}" && ! has_version ">=${CATEGORY}/${PN}-${SLOT}_alpha"; then
-		python_updater_warning="1"
-	fi
-}
-
-eselect_python_update() {
-	if [[ -z "$(eselect python show)" || ! -f "${EROOT}usr/bin/$(eselect python show)" ]]; then
-		eselect python update
-	fi
-
-	if [[ -z "$(eselect python show --python${PV%%.*})" || ! -f "${EROOT}usr/bin/$(eselect python show --python${PV%%.*})" ]]; then
-		eselect python update --python${PV%%.*}
-	fi
-}
-
-pkg_postinst() {
-	eselect_python_update
-
-	if [[ "${python_updater_warning}" == "1" ]]; then
-		ewarn "You have just upgraded from an older version of Python."
-		ewarn "You should switch active version of Python ${PV%%.*} and run"
-		ewarn "'python-updater [options]' to rebuild Python modules."
-	fi
-}
-
-pkg_postrm() {
-	eselect_python_update
-}
diff --git a/dev-lang/python/python-3.2.3.ebuild b/dev-lang/python/python-3.2.3.ebuild
deleted file mode 100644
index 7cb43617445f..000000000000
--- a/dev-lang/python/python-3.2.3.ebuild
+++ /dev/null
@@ -1,307 +0,0 @@
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/python-3.2.3.ebuild,v 1.21 2013/08/28 15:59:25 floppym Exp $
-
-EAPI="3"
-WANT_AUTOMAKE="none"
-WANT_LIBTOOL="none"
-
-inherit autotools eutils flag-o-matic multilib pax-utils python toolchain-funcs
-
-MY_P="Python-${PV}"
-PATCHSET_REVISION="0"
-
-DESCRIPTION="Python is an interpreted, interactive, object-oriented programming language."
-HOMEPAGE="http://www.python.org/"
-SRC_URI="http://www.python.org/ftp/python/${PV}/${MY_P}.tar.xz
-	mirror://gentoo/python-gentoo-patches-${PV}-${PATCHSET_REVISION}.tar.bz2"
-
-LICENSE="PSF-2"
-SLOT="3.2"
-PYTHON_ABI="${SLOT}"
-KEYWORDS="alpha amd64 arm ~hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="build doc elibc_uclibc examples gdbm hardened ipv6 +ncurses +readline sqlite +ssl +threads tk +wide-unicode wininst +xml"
-
-RDEPEND="app-arch/bzip2
-		>=sys-libs/zlib-1.1.3
-		virtual/libffi
-		virtual/libintl
-		!build? (
-			gdbm? ( sys-libs/gdbm[berkdb] )
-			ncurses? (
-				>=sys-libs/ncurses-5.2
-				readline? ( >=sys-libs/readline-4.1 )
-			)
-			sqlite? ( >=dev-db/sqlite-3.3.8:3 )
-			ssl? ( dev-libs/openssl )
-			tk? (
-				>=dev-lang/tk-8.0
-				dev-tcltk/blt
-			)
-			xml? ( >=dev-libs/expat-2.1 )
-		)"
-DEPEND="${RDEPEND}
-		virtual/pkgconfig
-		>=sys-devel/autoconf-2.65
-		!sys-devel/gcc[libffi]"
-RDEPEND+=" !build? ( app-misc/mime-types )
-	doc? ( dev-python/python-docs:${SLOT} )"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
-	python_pkg_setup
-
-	if [[ "${PV}" =~ ^3\.2(\.[1234])?(_pre)? ]]; then
-		rm -f "${EROOT}usr/$(get_libdir)/llibpython3.so"
-	else
-		die "Deprecated code not deleted"
-	fi
-}
-
-src_prepare() {
-	# Ensure that internal copies of expat, libffi and zlib are not used.
-	rm -fr Modules/expat
-	rm -fr Modules/_ctypes/libffi*
-	rm -fr Modules/zlib
-
-	local excluded_patches
-	if ! tc-is-cross-compiler; then
-		excluded_patches="*_all_crosscompile.patch"
-	fi
-
-	EPATCH_EXCLUDE="${excluded_patches}" EPATCH_SUFFIX="patch" \
-		epatch "${WORKDIR}/${PV}-${PATCHSET_REVISION}"
-	epatch "${FILESDIR}"/${PN}-3.2.3-x32.patch
-
-	sed -i -e "s:@@GENTOO_LIBDIR@@:$(get_libdir):g" \
-		Lib/distutils/command/install.py \
-		Lib/distutils/sysconfig.py \
-		Lib/site.py \
-		Lib/sysconfig.py \
-		Lib/test/test_site.py \
-		Makefile.pre.in \
-		Modules/Setup.dist \
-		Modules/getpath.c \
-		setup.py || die "sed failed to replace @@GENTOO_LIBDIR@@"
-
-	# Disable ABI flags.
-	sed -e "s/ABIFLAGS=\"\${ABIFLAGS}.*\"/:/" -i configure.in || die "sed failed"
-
-	eautoconf
-	eautoheader
-}
-
-src_configure() {
-	if use build; then
-		# Disable extraneous modules with extra dependencies.
-		export PYTHON_DISABLE_MODULES="gdbm _curses _curses_panel readline _sqlite3 _tkinter _elementtree pyexpat"
-		export PYTHON_DISABLE_SSL="1"
-	else
-		local disable
-		use gdbm     || disable+=" gdbm"
-		use ncurses  || disable+=" _curses _curses_panel"
-		use readline || disable+=" readline"
-		use sqlite   || disable+=" _sqlite3"
-		use ssl      || export PYTHON_DISABLE_SSL="1"
-		use tk       || disable+=" _tkinter"
-		use xml      || disable+=" _elementtree pyexpat" # _elementtree uses pyexpat.
-		export PYTHON_DISABLE_MODULES="${disable}"
-
-		if ! use xml; then
-			ewarn "You have configured Python without XML support."
-			ewarn "This is NOT a recommended configuration as you"
-			ewarn "may face problems parsing any XML documents."
-		fi
-	fi
-
-	if [[ -n "${PYTHON_DISABLE_MODULES}" ]]; then
-		einfo "Disabled modules: ${PYTHON_DISABLE_MODULES}"
-	fi
-
-	if [[ "$(gcc-major-version)" -ge 4 ]]; then
-		append-flags -fwrapv
-	fi
-
-	filter-flags -malign-double
-
-	[[ "${ARCH}" == "alpha" ]] && append-flags -fPIC
-
-	# https://bugs.gentoo.org/show_bug.cgi?id=50309
-	if is-flagq -O3; then
-		is-flagq -fstack-protector-all && replace-flags -O3 -O2
-		use hardened && replace-flags -O3 -O2
-	fi
-
-	if tc-is-cross-compiler; then
-		OPT="-O1" CFLAGS="" LDFLAGS="" CC="" \
-		./configure --{build,host}=${CBUILD} || die "cross-configure failed"
-		emake python Parser/pgen || die "cross-make failed"
-		mv python hostpython
-		mv Parser/pgen Parser/hostpgen
-		make distclean
-		sed -i \
-			-e "/^HOSTPYTHON/s:=.*:=./hostpython:" \
-			-e "/^HOSTPGEN/s:=.*:=./Parser/hostpgen:" \
-			Makefile.pre.in || die "sed failed"
-
-		# The configure script assumes it's buggy when cross-compiling.
-		export ac_cv_buggy_getaddrinfo=no
-		export ac_cv_have_long_long_format=yes
-	fi
-
-	# Export CXX so it ends up in /usr/lib/python3.X/config/Makefile.
-	tc-export CXX
-	# The configure script fails to use pkg-config correctly.
-	# http://bugs.python.org/issue15506
-	export ac_cv_path_PKG_CONFIG=$(tc-getPKG_CONFIG)
-
-	# Set LDFLAGS so we link modules with -lpython3.2 correctly.
-	# Needed on FreeBSD unless Python 3.2 is already installed.
-	# Please query BSD team before removing this!
-	append-ldflags "-L."
-
-	local dbmliborder
-	if use gdbm; then
-		dbmliborder+="${dbmliborder:+:}gdbm"
-	fi
-
-	OPT="" econf \
-		--with-fpectl \
-		--enable-shared \
-		$(use_enable ipv6) \
-		$(use_with threads) \
-		$(use_with wide-unicode) \
-		--infodir='${prefix}/share/info' \
-		--mandir='${prefix}/share/man' \
-		--with-computed-gotos \
-		--with-dbmliborder="${dbmliborder}" \
-		--with-libc="" \
-		--enable-loadable-sqlite-extensions \
-		--with-system-expat \
-		--with-system-ffi
-}
-
-src_compile() {
-	emake CPPFLAGS="" CFLAGS="" LDFLAGS="" || die "emake failed"
-
-	# Work around bug 329499. See also bug 413751.
-	pax-mark m python
-}
-
-src_test() {
-	# Tests will not work when cross compiling.
-	if tc-is-cross-compiler; then
-		elog "Disabling tests due to crosscompiling."
-		return
-	fi
-
-	# Byte compiling should be enabled here.
-	# Otherwise test_import fails.
-	python_enable_pyc
-
-	# Skip failing tests.
-	local skipped_tests="gdb"
-
-	for test in ${skipped_tests}; do
-		mv Lib/test/test_${test}.py "${T}"
-	done
-
-	# Rerun failed tests in verbose mode (regrtest -w).
-	emake test EXTRATESTOPTS="-w" CPPFLAGS="" CFLAGS="" LDFLAGS="" < /dev/tty
-	local result="$?"
-
-	for test in ${skipped_tests}; do
-		mv "${T}/test_${test}.py" Lib/test
-	done
-
-	elog "The following tests have been skipped:"
-	for test in ${skipped_tests}; do
-		elog "test_${test}.py"
-	done
-
-	elog "If you would like to run them, you may:"
-	elog "cd '${EPREFIX}$(python_get_libdir)/test'"
-	elog "and run the tests separately."
-
-	python_disable_pyc
-
-	if [[ "${result}" -ne 0 ]]; then
-		die "emake test failed"
-	fi
-}
-
-src_install() {
-	emake DESTDIR="${D}" altinstall || die "emake altinstall failed"
-	python_clean_installation_image -q
-
-	sed \
-		-e "s/\(CONFIGURE_LDFLAGS=\).*/\1/" \
-		-e "s/\(PY_LDFLAGS=\).*/\1/" \
-		-i "${ED}$(python_get_libdir)/config-${SLOT}/Makefile" || die "sed failed"
-
-	mv "${ED}usr/bin/python${SLOT}-config" "${ED}usr/bin/python-config-${SLOT}"
-
-	# Fix collisions between different slots of Python.
-	rm -f "${ED}usr/$(get_libdir)/libpython3.so"
-
-	if use build; then
-		rm -fr "${ED}usr/bin/idle${SLOT}" "${ED}$(python_get_libdir)/"{idlelib,sqlite3,test,tkinter}
-	else
-		use elibc_uclibc && rm -fr "${ED}$(python_get_libdir)/test"
-		use sqlite || rm -fr "${ED}$(python_get_libdir)/"{sqlite3,test/test_sqlite*}
-		use tk || rm -fr "${ED}usr/bin/idle${SLOT}" "${ED}$(python_get_libdir)/"{idlelib,tkinter,test/test_tk*}
-	fi
-
-	use threads || rm -fr "${ED}$(python_get_libdir)/multiprocessing"
-	use wininst || rm -f "${ED}$(python_get_libdir)/distutils/command/"wininst-*.exe
-
-	dodoc Misc/{ACKS,HISTORY,NEWS} || die "dodoc failed"
-
-	if use examples; then
-		insinto /usr/share/doc/${PF}/examples
-		find Tools -name __pycache__ -print0 | xargs -0 rm -fr
-		doins -r Tools || die "doins failed"
-	fi
-
-	newconfd "${FILESDIR}/pydoc.conf" pydoc-${SLOT} || die "newconfd failed"
-	newinitd "${FILESDIR}/pydoc.init" pydoc-${SLOT} || die "newinitd failed"
-	sed \
-		-e "s:@PYDOC_PORT_VARIABLE@:PYDOC${SLOT/./_}_PORT:" \
-		-e "s:@PYDOC@:pydoc${SLOT}:" \
-		-i "${ED}etc/conf.d/pydoc-${SLOT}" "${ED}etc/init.d/pydoc-${SLOT}" || die "sed failed"
-}
-
-pkg_preinst() {
-	if has_version "<${CATEGORY}/${PN}-${SLOT}" && ! has_version ">=${CATEGORY}/${PN}-${SLOT}_alpha"; then
-		python_updater_warning="1"
-	fi
-}
-
-eselect_python_update() {
-	if [[ -z "$(eselect python show)" || ! -f "${EROOT}usr/bin/$(eselect python show)" ]]; then
-		eselect python update
-	fi
-
-	if [[ -z "$(eselect python show --python${PV%%.*})" || ! -f "${EROOT}usr/bin/$(eselect python show --python${PV%%.*})" ]]; then
-		eselect python update --python${PV%%.*}
-	fi
-}
-
-pkg_postinst() {
-	eselect_python_update
-
-	python_mod_optimize -f -x "/(site-packages|test|tests)/" $(python_get_libdir)
-
-	if [[ "${python_updater_warning}" == "1" ]]; then
-		ewarn "You have just upgraded from an older version of Python."
-		ewarn "You should switch active version of Python ${PV%%.*} and run"
-		ewarn "'python-updater [options]' to rebuild Python modules."
-	fi
-}
-
-pkg_postrm() {
-	eselect_python_update
-
-	python_mod_cleanup $(python_get_libdir)
-}
diff --git a/dev-lang/python/python-3.2.4.ebuild b/dev-lang/python/python-3.2.4.ebuild
deleted file mode 100644
index 2d19f540d412..000000000000
--- a/dev-lang/python/python-3.2.4.ebuild
+++ /dev/null
@@ -1,366 +0,0 @@
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/python-3.2.4.ebuild,v 1.6 2013/08/28 15:59:25 floppym Exp $
-
-EAPI="4"
-WANT_AUTOMAKE="none"
-WANT_LIBTOOL="none"
-
-inherit autotools eutils flag-o-matic multilib pax-utils python-utils-r1 toolchain-funcs multiprocessing
-
-MY_P="Python-${PV}"
-PATCHSET_REVISION="1"
-
-DESCRIPTION="An interpreted, interactive, object-oriented programming language"
-HOMEPAGE="http://www.python.org/"
-SRC_URI="http://www.python.org/ftp/python/${PV}/${MY_P}.tar.xz
-	mirror://gentoo/python-gentoo-patches-${PV}-${PATCHSET_REVISION}.tar.xz"
-
-LICENSE="PSF-2"
-SLOT="3.2"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="build doc elibc_uclibc examples gdbm hardened ipv6 +ncurses +readline sqlite +ssl +threads tk +wide-unicode wininst +xml"
-
-# Do not add a dependency on dev-lang/python to this ebuild.
-# If you need to apply a patch which requires python for bootstrapping, please
-# run the bootstrap code on your dev box and include the results in the
-# patchset. See bug 447752.
-
-RDEPEND="app-arch/bzip2
-	>=sys-libs/zlib-1.1.3
-	virtual/libffi
-	virtual/libintl
-	!build? (
-		gdbm? ( sys-libs/gdbm[berkdb] )
-		ncurses? (
-			>=sys-libs/ncurses-5.2
-			readline? ( >=sys-libs/readline-4.1 )
-		)
-		sqlite? ( >=dev-db/sqlite-3.3.8:3 )
-		ssl? ( dev-libs/openssl )
-		tk? (
-			>=dev-lang/tk-8.0
-			dev-tcltk/blt
-		)
-		xml? ( >=dev-libs/expat-2.1 )
-	)"
-DEPEND="${RDEPEND}
-	virtual/pkgconfig
-	>=sys-devel/autoconf-2.65
-	!sys-devel/gcc[libffi]"
-RDEPEND+=" !build? ( app-misc/mime-types )
-	doc? ( dev-python/python-docs:${SLOT} )"
-PDEPEND="app-admin/eselect-python
-	app-admin/python-updater"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
-	if [[ "${PV}" =~ ^3\.2(\.[1234])?(_pre)? ]]; then
-		rm -f "${EROOT}usr/$(get_libdir)/llibpython3.so"
-	else
-		die "Deprecated code not deleted"
-	fi
-}
-
-src_prepare() {
-	# Ensure that internal copies of expat, libffi and zlib are not used.
-	rm -r Modules/expat
-	rm -r Modules/_ctypes/libffi*
-	rm -r Modules/zlib
-
-	local excluded_patches
-	if ! tc-is-cross-compiler; then
-		excluded_patches="*_all_crosscompile.patch"
-	fi
-
-	EPATCH_EXCLUDE="${excluded_patches}" EPATCH_SUFFIX="patch" \
-		epatch "${WORKDIR}/${PV}-${PATCHSET_REVISION}"
-
-	sed -i -e "s:@@GENTOO_LIBDIR@@:$(get_libdir):g" \
-		Lib/distutils/command/install.py \
-		Lib/distutils/sysconfig.py \
-		Lib/site.py \
-		Lib/sysconfig.py \
-		Lib/test/test_site.py \
-		Makefile.pre.in \
-		Modules/Setup.dist \
-		Modules/getpath.c \
-		setup.py || die "sed failed to replace @@GENTOO_LIBDIR@@"
-
-	# Disable ABI flags.
-	sed -e "s/ABIFLAGS=\"\${ABIFLAGS}.*\"/:/" -i configure.ac || die "sed failed"
-
-	epatch_user
-
-	eautoconf
-	eautoheader
-}
-
-src_configure() {
-	if use build; then
-		# Disable extraneous modules with extra dependencies.
-		export PYTHON_DISABLE_MODULES="gdbm _curses _curses_panel readline _sqlite3 _tkinter _elementtree pyexpat"
-		export PYTHON_DISABLE_SSL="1"
-	else
-		local disable
-		use gdbm     || disable+=" gdbm"
-		use ncurses  || disable+=" _curses _curses_panel"
-		use readline || disable+=" readline"
-		use sqlite   || disable+=" _sqlite3"
-		use ssl      || export PYTHON_DISABLE_SSL="1"
-		use tk       || disable+=" _tkinter"
-		use xml      || disable+=" _elementtree pyexpat" # _elementtree uses pyexpat.
-		export PYTHON_DISABLE_MODULES="${disable}"
-
-		if ! use xml; then
-			ewarn "You have configured Python without XML support."
-			ewarn "This is NOT a recommended configuration as you"
-			ewarn "may face problems parsing any XML documents."
-		fi
-	fi
-
-	if [[ -n "${PYTHON_DISABLE_MODULES}" ]]; then
-		einfo "Disabled modules: ${PYTHON_DISABLE_MODULES}"
-	fi
-
-	if [[ "$(gcc-major-version)" -ge 4 ]]; then
-		append-flags -fwrapv
-	fi
-
-	filter-flags -malign-double
-
-	[[ "${ARCH}" == "alpha" ]] && append-flags -fPIC
-
-	# https://bugs.gentoo.org/show_bug.cgi?id=50309
-	if is-flagq -O3; then
-		is-flagq -fstack-protector-all && replace-flags -O3 -O2
-		use hardened && replace-flags -O3 -O2
-	fi
-
-	# Run the configure scripts in parallel.
-	multijob_init
-
-	mkdir -p "${WORKDIR}"/{${CBUILD},${CHOST}}
-
-	if tc-is-cross-compiler; then
-		(
-		multijob_child_init
-		cd "${WORKDIR}"/${CBUILD} >/dev/null
-		OPT="-O1" CFLAGS="" CPPFLAGS="" LDFLAGS="" CC="" \
-		"${S}"/configure \
-			--{build,host}=${CBUILD} \
-			|| die "cross-configure failed"
-		) &
-		multijob_post_fork
-
-		# The configure script assumes it's buggy when cross-compiling.
-		export ac_cv_buggy_getaddrinfo=no
-		export ac_cv_have_long_long_format=yes
-	fi
-
-	# Export CXX so it ends up in /usr/lib/python3.X/config/Makefile.
-	tc-export CXX
-	# The configure script fails to use pkg-config correctly.
-	# http://bugs.python.org/issue15506
-	export ac_cv_path_PKG_CONFIG=$(tc-getPKG_CONFIG)
-
-	# Set LDFLAGS so we link modules with -lpython3.2 correctly.
-	# Needed on FreeBSD unless Python 3.2 is already installed.
-	# Please query BSD team before removing this!
-	append-ldflags "-L."
-
-	local dbmliborder
-	if use gdbm; then
-		dbmliborder+="${dbmliborder:+:}gdbm"
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	ECONF_SOURCE=${S} OPT="" \
-	econf \
-		--with-fpectl \
-		--enable-shared \
-		$(use_enable ipv6) \
-		$(use_with threads) \
-		$(use_with wide-unicode) \
-		--infodir='${prefix}/share/info' \
-		--mandir='${prefix}/share/man' \
-		--with-computed-gotos \
-		--with-dbmliborder="${dbmliborder}" \
-		--with-libc="" \
-		--enable-loadable-sqlite-extensions \
-		--with-system-expat \
-		--with-system-ffi
-
-	if tc-is-cross-compiler; then
-		# Modify the Makefile.pre so we don't regen for the host/ one.
-		# We need to link the host python programs into $PWD and run
-		# them from here because the distutils sysconfig module will
-		# parse Makefile/etc... from argv[0], and we need it to pick
-		# up the target settings, not the host ones.
-		sed -i \
-			-e '1iHOSTPYTHONPATH = ./hostpythonpath:' \
-			-e '/^HOSTPYTHON/s:=.*:= ./hostpython:' \
-			-e '/^HOSTPGEN/s:=.*:= ./Parser/hostpgen:' \
-			Makefile{.pre,} || die "sed failed"
-	fi
-
-	multijob_finish
-}
-
-src_compile() {
-	if tc-is-cross-compiler; then
-		cd "${WORKDIR}"/${CBUILD}
-		# Disable as many modules as possible -- but we need a few to install.
-		PYTHON_DISABLE_MODULES=$(
-			sed -n "/Extension('/{s:^.*Extension('::;s:'.*::;p}" "${S}"/setup.py | \
-				egrep -v '(unicodedata|time|cStringIO|_struct|binascii)'
-		) \
-		PTHON_DISABLE_SSL="1" \
-		SYSROOT= \
-		emake
-		# See comment in src_configure about these.
-		ln python ../${CHOST}/hostpython || die
-		ln Parser/pgen ../${CHOST}/Parser/hostpgen || die
-		ln -s ../${CBUILD}/build/lib.*/ ../${CHOST}/hostpythonpath || die
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	emake CPPFLAGS="" CFLAGS="" LDFLAGS=""
-
-	# Work around bug 329499. See also bug 413751 and 457194.
-	if has_version dev-libs/libffi[pax_kernel]; then
-		pax-mark E python
-	else
-		pax-mark m python
-	fi
-}
-
-src_test() {
-	# Tests will not work when cross compiling.
-	if tc-is-cross-compiler; then
-		elog "Disabling tests due to crosscompiling."
-		return
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-
-	# Skip failing tests.
-	local skipped_tests="gdb"
-
-	for test in ${skipped_tests}; do
-		mv "${S}"/Lib/test/test_${test}.py "${T}"
-	done
-
-	# Rerun failed tests in verbose mode (regrtest -w).
-	PYTHONDONTWRITEBYTECODE="" emake test EXTRATESTOPTS="-w" CPPFLAGS="" CFLAGS="" LDFLAGS="" < /dev/tty
-	local result="$?"
-
-	for test in ${skipped_tests}; do
-		mv "${T}/test_${test}.py" "${S}"/Lib/test
-	done
-
-	elog "The following tests have been skipped:"
-	for test in ${skipped_tests}; do
-		elog "test_${test}.py"
-	done
-
-	elog "If you would like to run them, you may:"
-	elog "cd '${EPREFIX}/usr/$(get_libdir)/python${SLOT}/test'"
-	elog "and run the tests separately."
-
-	if [[ "${result}" -ne 0 ]]; then
-		die "emake test failed"
-	fi
-}
-
-src_install() {
-	local libdir=${ED}/usr/$(get_libdir)/python${SLOT}
-
-	cd "${WORKDIR}"/${CHOST}
-	emake DESTDIR="${D}" altinstall
-
-	sed \
-		-e "s/\(CONFIGURE_LDFLAGS=\).*/\1/" \
-		-e "s/\(PY_LDFLAGS=\).*/\1/" \
-		-i "${libdir}/config-${SLOT}/Makefile" || die "sed failed"
-
-	# Backwards compat with Gentoo divergence.
-	dosym python${SLOT}-config /usr/bin/python-config-${SLOT}
-
-	# Fix collisions between different slots of Python.
-	rm "${ED}usr/$(get_libdir)/libpython3.so" || die
-
-	if use build; then
-		rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{idlelib,sqlite3,test,tkinter}
-	else
-		use elibc_uclibc && rm -fr "${libdir}/test"
-		use sqlite || rm -fr "${libdir}/"{sqlite3,test/test_sqlite*}
-		use tk || rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{idlelib,tkinter,test/test_tk*}
-	fi
-
-	use threads || rm -fr "${libdir}/multiprocessing"
-	use wininst || rm -f "${libdir}/distutils/command/"wininst-*.exe
-
-	dodoc "${S}"/Misc/{ACKS,HISTORY,NEWS}
-
-	if use examples; then
-		insinto /usr/share/doc/${PF}/examples
-		find "${S}"/Tools -name __pycache__ -print0 | xargs -0 rm -fr
-		doins -r "${S}"/Tools
-	fi
-	insinto /usr/share/gdb/auto-load/usr/$(get_libdir) #443510
-	local libname=$(printf 'e:\n\t@echo $(INSTSONAME)\ninclude Makefile\n' | \
-		emake --no-print-directory -s -f - 2>/dev/null)
-	newins "${S}"/Tools/gdb/libpython.py "${libname}"-gdb.py
-
-	newconfd "${FILESDIR}/pydoc.conf" pydoc-${SLOT}
-	newinitd "${FILESDIR}/pydoc.init" pydoc-${SLOT}
-	sed \
-		-e "s:@PYDOC_PORT_VARIABLE@:PYDOC${SLOT/./_}_PORT:" \
-		-e "s:@PYDOC@:pydoc${SLOT}:" \
-		-i "${ED}etc/conf.d/pydoc-${SLOT}" "${ED}etc/init.d/pydoc-${SLOT}" || die "sed failed"
-
-	# for python-exec
-	python_export python${SLOT} EPYTHON PYTHON PYTHON_SITEDIR
-
-	# if not using a cross-compiler, use the fresh binary
-	if ! tc-is-cross-compiler; then
-		local PYTHON=./python \
-			LD_LIBRARY_PATH=${LD_LIBRARY_PATH+${LD_LIBRARY_PATH}:}.
-		export LD_LIBRARY_PATH
-	fi
-
-	echo "EPYTHON='${EPYTHON}'" > epython.py
-	python_domodule epython.py
-}
-
-pkg_preinst() {
-	if has_version "<${CATEGORY}/${PN}-${SLOT}" && ! has_version ">=${CATEGORY}/${PN}-${SLOT}_alpha"; then
-		python_updater_warning="1"
-	fi
-}
-
-eselect_python_update() {
-	if [[ -z "$(eselect python show)" || ! -f "${EROOT}usr/bin/$(eselect python show)" ]]; then
-		eselect python update
-	fi
-
-	if [[ -z "$(eselect python show --python${PV%%.*})" || ! -f "${EROOT}usr/bin/$(eselect python show --python${PV%%.*})" ]]; then
-		eselect python update --python${PV%%.*}
-	fi
-}
-
-pkg_postinst() {
-	eselect_python_update
-
-	if [[ "${python_updater_warning}" == "1" ]]; then
-		ewarn "You have just upgraded from an older version of Python."
-		ewarn "You should switch active version of Python ${PV%%.*} and run"
-		ewarn "'python-updater [options]' to rebuild Python modules."
-	fi
-}
-
-pkg_postrm() {
-	eselect_python_update
-}
diff --git a/dev-lang/python/python-3.2.5-r1.ebuild b/dev-lang/python/python-3.2.5-r1.ebuild
deleted file mode 100644
index 191648c242a7..000000000000
--- a/dev-lang/python/python-3.2.5-r1.ebuild
+++ /dev/null
@@ -1,368 +0,0 @@
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/python-3.2.5-r1.ebuild,v 1.13 2013/08/28 15:59:25 floppym Exp $
-
-EAPI="4"
-WANT_AUTOMAKE="none"
-WANT_LIBTOOL="none"
-
-inherit autotools eutils flag-o-matic multilib pax-utils python-utils-r1 toolchain-funcs multiprocessing
-
-MY_P="Python-${PV}"
-PATCHSET_REVISION="0"
-
-DESCRIPTION="An interpreted, interactive, object-oriented programming language"
-HOMEPAGE="http://www.python.org/"
-SRC_URI="http://www.python.org/ftp/python/${PV}/${MY_P}.tar.xz
-	mirror://gentoo/python-gentoo-patches-${PV}-${PATCHSET_REVISION}.tar.xz"
-
-LICENSE="PSF-2"
-SLOT="3.2"
-KEYWORDS="alpha amd64 arm hppa ia64 ~m68k ~mips ppc ppc64 s390 sh sparc x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="build doc elibc_uclibc examples gdbm hardened ipv6 +ncurses +readline sqlite +ssl +threads tk +wide-unicode wininst +xml"
-
-# Do not add a dependency on dev-lang/python to this ebuild.
-# If you need to apply a patch which requires python for bootstrapping, please
-# run the bootstrap code on your dev box and include the results in the
-# patchset. See bug 447752.
-
-RDEPEND="app-arch/bzip2
-	>=sys-libs/zlib-1.1.3
-	virtual/libffi
-	virtual/libintl
-	!build? (
-		gdbm? ( sys-libs/gdbm[berkdb] )
-		ncurses? (
-			>=sys-libs/ncurses-5.2
-			readline? ( >=sys-libs/readline-4.1 )
-		)
-		sqlite? ( >=dev-db/sqlite-3.3.8:3 )
-		ssl? ( dev-libs/openssl )
-		tk? (
-			>=dev-lang/tk-8.0
-			dev-tcltk/blt
-		)
-		xml? ( >=dev-libs/expat-2.1 )
-	)"
-DEPEND="${RDEPEND}
-	virtual/pkgconfig
-	>=sys-devel/autoconf-2.65
-	!sys-devel/gcc[libffi]"
-RDEPEND+=" !build? ( app-misc/mime-types )
-	doc? ( dev-python/python-docs:${SLOT} )"
-PDEPEND="app-admin/eselect-python
-	app-admin/python-updater"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
-	if [[ "${PV}" =~ ^3\.2(\.[1234])?(_pre)? ]]; then
-		rm -f "${EROOT}usr/$(get_libdir)/llibpython3.so"
-	else
-		die "Deprecated code not deleted"
-	fi
-}
-
-src_prepare() {
-	# Ensure that internal copies of expat, libffi and zlib are not used.
-	rm -r Modules/expat
-	rm -r Modules/_ctypes/libffi*
-	rm -r Modules/zlib
-
-	local excluded_patches
-	if ! tc-is-cross-compiler; then
-		excluded_patches="*_all_crosscompile.patch"
-	fi
-
-	EPATCH_EXCLUDE="${excluded_patches}" EPATCH_SUFFIX="patch" \
-		epatch "${WORKDIR}/${PV}-${PATCHSET_REVISION}"
-
-	epatch "${FILESDIR}/python-3.2-CVE-2013-2099.patch"
-
-	sed -i -e "s:@@GENTOO_LIBDIR@@:$(get_libdir):g" \
-		Lib/distutils/command/install.py \
-		Lib/distutils/sysconfig.py \
-		Lib/site.py \
-		Lib/sysconfig.py \
-		Lib/test/test_site.py \
-		Makefile.pre.in \
-		Modules/Setup.dist \
-		Modules/getpath.c \
-		setup.py || die "sed failed to replace @@GENTOO_LIBDIR@@"
-
-	# Disable ABI flags.
-	sed -e "s/ABIFLAGS=\"\${ABIFLAGS}.*\"/:/" -i configure.ac || die "sed failed"
-
-	epatch_user
-
-	eautoconf
-	eautoheader
-}
-
-src_configure() {
-	if use build; then
-		# Disable extraneous modules with extra dependencies.
-		export PYTHON_DISABLE_MODULES="gdbm _curses _curses_panel readline _sqlite3 _tkinter _elementtree pyexpat"
-		export PYTHON_DISABLE_SSL="1"
-	else
-		local disable
-		use gdbm     || disable+=" gdbm"
-		use ncurses  || disable+=" _curses _curses_panel"
-		use readline || disable+=" readline"
-		use sqlite   || disable+=" _sqlite3"
-		use ssl      || export PYTHON_DISABLE_SSL="1"
-		use tk       || disable+=" _tkinter"
-		use xml      || disable+=" _elementtree pyexpat" # _elementtree uses pyexpat.
-		export PYTHON_DISABLE_MODULES="${disable}"
-
-		if ! use xml; then
-			ewarn "You have configured Python without XML support."
-			ewarn "This is NOT a recommended configuration as you"
-			ewarn "may face problems parsing any XML documents."
-		fi
-	fi
-
-	if [[ -n "${PYTHON_DISABLE_MODULES}" ]]; then
-		einfo "Disabled modules: ${PYTHON_DISABLE_MODULES}"
-	fi
-
-	if [[ "$(gcc-major-version)" -ge 4 ]]; then
-		append-flags -fwrapv
-	fi
-
-	filter-flags -malign-double
-
-	[[ "${ARCH}" == "alpha" ]] && append-flags -fPIC
-
-	# https://bugs.gentoo.org/show_bug.cgi?id=50309
-	if is-flagq -O3; then
-		is-flagq -fstack-protector-all && replace-flags -O3 -O2
-		use hardened && replace-flags -O3 -O2
-	fi
-
-	# Run the configure scripts in parallel.
-	multijob_init
-
-	mkdir -p "${WORKDIR}"/{${CBUILD},${CHOST}}
-
-	if tc-is-cross-compiler; then
-		(
-		multijob_child_init
-		cd "${WORKDIR}"/${CBUILD} >/dev/null
-		OPT="-O1" CFLAGS="" CPPFLAGS="" LDFLAGS="" CC="" \
-		"${S}"/configure \
-			--{build,host}=${CBUILD} \
-			|| die "cross-configure failed"
-		) &
-		multijob_post_fork
-
-		# The configure script assumes it's buggy when cross-compiling.
-		export ac_cv_buggy_getaddrinfo=no
-		export ac_cv_have_long_long_format=yes
-	fi
-
-	# Export CXX so it ends up in /usr/lib/python3.X/config/Makefile.
-	tc-export CXX
-	# The configure script fails to use pkg-config correctly.
-	# http://bugs.python.org/issue15506
-	export ac_cv_path_PKG_CONFIG=$(tc-getPKG_CONFIG)
-
-	# Set LDFLAGS so we link modules with -lpython3.2 correctly.
-	# Needed on FreeBSD unless Python 3.2 is already installed.
-	# Please query BSD team before removing this!
-	append-ldflags "-L."
-
-	local dbmliborder
-	if use gdbm; then
-		dbmliborder+="${dbmliborder:+:}gdbm"
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	ECONF_SOURCE=${S} OPT="" \
-	econf \
-		--with-fpectl \
-		--enable-shared \
-		$(use_enable ipv6) \
-		$(use_with threads) \
-		$(use_with wide-unicode) \
-		--infodir='${prefix}/share/info' \
-		--mandir='${prefix}/share/man' \
-		--with-computed-gotos \
-		--with-dbmliborder="${dbmliborder}" \
-		--with-libc="" \
-		--enable-loadable-sqlite-extensions \
-		--with-system-expat \
-		--with-system-ffi
-
-	if tc-is-cross-compiler; then
-		# Modify the Makefile.pre so we don't regen for the host/ one.
-		# We need to link the host python programs into $PWD and run
-		# them from here because the distutils sysconfig module will
-		# parse Makefile/etc... from argv[0], and we need it to pick
-		# up the target settings, not the host ones.
-		sed -i \
-			-e '1iHOSTPYTHONPATH = ./hostpythonpath:' \
-			-e '/^HOSTPYTHON/s:=.*:= ./hostpython:' \
-			-e '/^HOSTPGEN/s:=.*:= ./Parser/hostpgen:' \
-			Makefile{.pre,} || die "sed failed"
-	fi
-
-	multijob_finish
-}
-
-src_compile() {
-	if tc-is-cross-compiler; then
-		cd "${WORKDIR}"/${CBUILD}
-		# Disable as many modules as possible -- but we need a few to install.
-		PYTHON_DISABLE_MODULES=$(
-			sed -n "/Extension('/{s:^.*Extension('::;s:'.*::;p}" "${S}"/setup.py | \
-				egrep -v '(unicodedata|time|cStringIO|_struct|binascii)'
-		) \
-		PTHON_DISABLE_SSL="1" \
-		SYSROOT= \
-		emake
-		# See comment in src_configure about these.
-		ln python ../${CHOST}/hostpython || die
-		ln Parser/pgen ../${CHOST}/Parser/hostpgen || die
-		ln -s ../${CBUILD}/build/lib.*/ ../${CHOST}/hostpythonpath || die
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	emake CPPFLAGS="" CFLAGS="" LDFLAGS=""
-
-	# Work around bug 329499. See also bug 413751 and 457194.
-	if has_version dev-libs/libffi[pax_kernel]; then
-		pax-mark E python
-	else
-		pax-mark m python
-	fi
-}
-
-src_test() {
-	# Tests will not work when cross compiling.
-	if tc-is-cross-compiler; then
-		elog "Disabling tests due to crosscompiling."
-		return
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-
-	# Skip failing tests.
-	local skipped_tests="gdb"
-
-	for test in ${skipped_tests}; do
-		mv "${S}"/Lib/test/test_${test}.py "${T}"
-	done
-
-	# Rerun failed tests in verbose mode (regrtest -w).
-	PYTHONDONTWRITEBYTECODE="" emake test EXTRATESTOPTS="-w" CPPFLAGS="" CFLAGS="" LDFLAGS="" < /dev/tty
-	local result="$?"
-
-	for test in ${skipped_tests}; do
-		mv "${T}/test_${test}.py" "${S}"/Lib/test
-	done
-
-	elog "The following tests have been skipped:"
-	for test in ${skipped_tests}; do
-		elog "test_${test}.py"
-	done
-
-	elog "If you would like to run them, you may:"
-	elog "cd '${EPREFIX}/usr/$(get_libdir)/python${SLOT}/test'"
-	elog "and run the tests separately."
-
-	if [[ "${result}" -ne 0 ]]; then
-		die "emake test failed"
-	fi
-}
-
-src_install() {
-	local libdir=${ED}/usr/$(get_libdir)/python${SLOT}
-
-	cd "${WORKDIR}"/${CHOST}
-	emake DESTDIR="${D}" altinstall
-
-	sed \
-		-e "s/\(CONFIGURE_LDFLAGS=\).*/\1/" \
-		-e "s/\(PY_LDFLAGS=\).*/\1/" \
-		-i "${libdir}/config-${SLOT}/Makefile" || die "sed failed"
-
-	# Backwards compat with Gentoo divergence.
-	dosym python${SLOT}-config /usr/bin/python-config-${SLOT}
-
-	# Fix collisions between different slots of Python.
-	rm "${ED}usr/$(get_libdir)/libpython3.so" || die
-
-	if use build; then
-		rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{idlelib,sqlite3,test,tkinter}
-	else
-		use elibc_uclibc && rm -fr "${libdir}/test"
-		use sqlite || rm -fr "${libdir}/"{sqlite3,test/test_sqlite*}
-		use tk || rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{idlelib,tkinter,test/test_tk*}
-	fi
-
-	use threads || rm -fr "${libdir}/multiprocessing"
-	use wininst || rm -f "${libdir}/distutils/command/"wininst-*.exe
-
-	dodoc "${S}"/Misc/{ACKS,HISTORY,NEWS}
-
-	if use examples; then
-		insinto /usr/share/doc/${PF}/examples
-		find "${S}"/Tools -name __pycache__ -print0 | xargs -0 rm -fr
-		doins -r "${S}"/Tools
-	fi
-	insinto /usr/share/gdb/auto-load/usr/$(get_libdir) #443510
-	local libname=$(printf 'e:\n\t@echo $(INSTSONAME)\ninclude Makefile\n' | \
-		emake --no-print-directory -s -f - 2>/dev/null)
-	newins "${S}"/Tools/gdb/libpython.py "${libname}"-gdb.py
-
-	newconfd "${FILESDIR}/pydoc.conf" pydoc-${SLOT}
-	newinitd "${FILESDIR}/pydoc.init" pydoc-${SLOT}
-	sed \
-		-e "s:@PYDOC_PORT_VARIABLE@:PYDOC${SLOT/./_}_PORT:" \
-		-e "s:@PYDOC@:pydoc${SLOT}:" \
-		-i "${ED}etc/conf.d/pydoc-${SLOT}" "${ED}etc/init.d/pydoc-${SLOT}" || die "sed failed"
-
-	# for python-exec
-	python_export python${SLOT} EPYTHON PYTHON PYTHON_SITEDIR
-
-	# if not using a cross-compiler, use the fresh binary
-	if ! tc-is-cross-compiler; then
-		local PYTHON=./python \
-			LD_LIBRARY_PATH=${LD_LIBRARY_PATH+${LD_LIBRARY_PATH}:}.
-		export LD_LIBRARY_PATH
-	fi
-
-	echo "EPYTHON='${EPYTHON}'" > epython.py
-	python_domodule epython.py
-}
-
-pkg_preinst() {
-	if has_version "<${CATEGORY}/${PN}-${SLOT}" && ! has_version ">=${CATEGORY}/${PN}-${SLOT}_alpha"; then
-		python_updater_warning="1"
-	fi
-}
-
-eselect_python_update() {
-	if [[ -z "$(eselect python show)" || ! -f "${EROOT}usr/bin/$(eselect python show)" ]]; then
-		eselect python update
-	fi
-
-	if [[ -z "$(eselect python show --python${PV%%.*})" || ! -f "${EROOT}usr/bin/$(eselect python show --python${PV%%.*})" ]]; then
-		eselect python update --python${PV%%.*}
-	fi
-}
-
-pkg_postinst() {
-	eselect_python_update
-
-	if [[ "${python_updater_warning}" == "1" ]]; then
-		ewarn "You have just upgraded from an older version of Python."
-		ewarn "You should switch active version of Python ${PV%%.*} and run"
-		ewarn "'python-updater [options]' to rebuild Python modules."
-	fi
-}
-
-pkg_postrm() {
-	eselect_python_update
-}
diff --git a/dev-lang/python/python-3.2.5.ebuild b/dev-lang/python/python-3.2.5.ebuild
deleted file mode 100644
index 06a5c32ebf0c..000000000000
--- a/dev-lang/python/python-3.2.5.ebuild
+++ /dev/null
@@ -1,366 +0,0 @@
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/python-3.2.5.ebuild,v 1.2 2013/08/28 15:59:25 floppym Exp $
-
-EAPI="4"
-WANT_AUTOMAKE="none"
-WANT_LIBTOOL="none"
-
-inherit autotools eutils flag-o-matic multilib pax-utils python-utils-r1 toolchain-funcs multiprocessing
-
-MY_P="Python-${PV}"
-PATCHSET_REVISION="0"
-
-DESCRIPTION="An interpreted, interactive, object-oriented programming language"
-HOMEPAGE="http://www.python.org/"
-SRC_URI="http://www.python.org/ftp/python/${PV}/${MY_P}.tar.xz
-	mirror://gentoo/python-gentoo-patches-${PV}-${PATCHSET_REVISION}.tar.xz"
-
-LICENSE="PSF-2"
-SLOT="3.2"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="build doc elibc_uclibc examples gdbm hardened ipv6 +ncurses +readline sqlite +ssl +threads tk +wide-unicode wininst +xml"
-
-# Do not add a dependency on dev-lang/python to this ebuild.
-# If you need to apply a patch which requires python for bootstrapping, please
-# run the bootstrap code on your dev box and include the results in the
-# patchset. See bug 447752.
-
-RDEPEND="app-arch/bzip2
-	>=sys-libs/zlib-1.1.3
-	virtual/libffi
-	virtual/libintl
-	!build? (
-		gdbm? ( sys-libs/gdbm[berkdb] )
-		ncurses? (
-			>=sys-libs/ncurses-5.2
-			readline? ( >=sys-libs/readline-4.1 )
-		)
-		sqlite? ( >=dev-db/sqlite-3.3.8:3 )
-		ssl? ( dev-libs/openssl )
-		tk? (
-			>=dev-lang/tk-8.0
-			dev-tcltk/blt
-		)
-		xml? ( >=dev-libs/expat-2.1 )
-	)"
-DEPEND="${RDEPEND}
-	virtual/pkgconfig
-	>=sys-devel/autoconf-2.65
-	!sys-devel/gcc[libffi]"
-RDEPEND+=" !build? ( app-misc/mime-types )
-	doc? ( dev-python/python-docs:${SLOT} )"
-PDEPEND="app-admin/eselect-python
-	app-admin/python-updater"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
-	if [[ "${PV}" =~ ^3\.2(\.[1234])?(_pre)? ]]; then
-		rm -f "${EROOT}usr/$(get_libdir)/llibpython3.so"
-	else
-		die "Deprecated code not deleted"
-	fi
-}
-
-src_prepare() {
-	# Ensure that internal copies of expat, libffi and zlib are not used.
-	rm -r Modules/expat
-	rm -r Modules/_ctypes/libffi*
-	rm -r Modules/zlib
-
-	local excluded_patches
-	if ! tc-is-cross-compiler; then
-		excluded_patches="*_all_crosscompile.patch"
-	fi
-
-	EPATCH_EXCLUDE="${excluded_patches}" EPATCH_SUFFIX="patch" \
-		epatch "${WORKDIR}/${PV}-${PATCHSET_REVISION}"
-
-	sed -i -e "s:@@GENTOO_LIBDIR@@:$(get_libdir):g" \
-		Lib/distutils/command/install.py \
-		Lib/distutils/sysconfig.py \
-		Lib/site.py \
-		Lib/sysconfig.py \
-		Lib/test/test_site.py \
-		Makefile.pre.in \
-		Modules/Setup.dist \
-		Modules/getpath.c \
-		setup.py || die "sed failed to replace @@GENTOO_LIBDIR@@"
-
-	# Disable ABI flags.
-	sed -e "s/ABIFLAGS=\"\${ABIFLAGS}.*\"/:/" -i configure.ac || die "sed failed"
-
-	epatch_user
-
-	eautoconf
-	eautoheader
-}
-
-src_configure() {
-	if use build; then
-		# Disable extraneous modules with extra dependencies.
-		export PYTHON_DISABLE_MODULES="gdbm _curses _curses_panel readline _sqlite3 _tkinter _elementtree pyexpat"
-		export PYTHON_DISABLE_SSL="1"
-	else
-		local disable
-		use gdbm     || disable+=" gdbm"
-		use ncurses  || disable+=" _curses _curses_panel"
-		use readline || disable+=" readline"
-		use sqlite   || disable+=" _sqlite3"
-		use ssl      || export PYTHON_DISABLE_SSL="1"
-		use tk       || disable+=" _tkinter"
-		use xml      || disable+=" _elementtree pyexpat" # _elementtree uses pyexpat.
-		export PYTHON_DISABLE_MODULES="${disable}"
-
-		if ! use xml; then
-			ewarn "You have configured Python without XML support."
-			ewarn "This is NOT a recommended configuration as you"
-			ewarn "may face problems parsing any XML documents."
-		fi
-	fi
-
-	if [[ -n "${PYTHON_DISABLE_MODULES}" ]]; then
-		einfo "Disabled modules: ${PYTHON_DISABLE_MODULES}"
-	fi
-
-	if [[ "$(gcc-major-version)" -ge 4 ]]; then
-		append-flags -fwrapv
-	fi
-
-	filter-flags -malign-double
-
-	[[ "${ARCH}" == "alpha" ]] && append-flags -fPIC
-
-	# https://bugs.gentoo.org/show_bug.cgi?id=50309
-	if is-flagq -O3; then
-		is-flagq -fstack-protector-all && replace-flags -O3 -O2
-		use hardened && replace-flags -O3 -O2
-	fi
-
-	# Run the configure scripts in parallel.
-	multijob_init
-
-	mkdir -p "${WORKDIR}"/{${CBUILD},${CHOST}}
-
-	if tc-is-cross-compiler; then
-		(
-		multijob_child_init
-		cd "${WORKDIR}"/${CBUILD} >/dev/null
-		OPT="-O1" CFLAGS="" CPPFLAGS="" LDFLAGS="" CC="" \
-		"${S}"/configure \
-			--{build,host}=${CBUILD} \
-			|| die "cross-configure failed"
-		) &
-		multijob_post_fork
-
-		# The configure script assumes it's buggy when cross-compiling.
-		export ac_cv_buggy_getaddrinfo=no
-		export ac_cv_have_long_long_format=yes
-	fi
-
-	# Export CXX so it ends up in /usr/lib/python3.X/config/Makefile.
-	tc-export CXX
-	# The configure script fails to use pkg-config correctly.
-	# http://bugs.python.org/issue15506
-	export ac_cv_path_PKG_CONFIG=$(tc-getPKG_CONFIG)
-
-	# Set LDFLAGS so we link modules with -lpython3.2 correctly.
-	# Needed on FreeBSD unless Python 3.2 is already installed.
-	# Please query BSD team before removing this!
-	append-ldflags "-L."
-
-	local dbmliborder
-	if use gdbm; then
-		dbmliborder+="${dbmliborder:+:}gdbm"
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	ECONF_SOURCE=${S} OPT="" \
-	econf \
-		--with-fpectl \
-		--enable-shared \
-		$(use_enable ipv6) \
-		$(use_with threads) \
-		$(use_with wide-unicode) \
-		--infodir='${prefix}/share/info' \
-		--mandir='${prefix}/share/man' \
-		--with-computed-gotos \
-		--with-dbmliborder="${dbmliborder}" \
-		--with-libc="" \
-		--enable-loadable-sqlite-extensions \
-		--with-system-expat \
-		--with-system-ffi
-
-	if tc-is-cross-compiler; then
-		# Modify the Makefile.pre so we don't regen for the host/ one.
-		# We need to link the host python programs into $PWD and run
-		# them from here because the distutils sysconfig module will
-		# parse Makefile/etc... from argv[0], and we need it to pick
-		# up the target settings, not the host ones.
-		sed -i \
-			-e '1iHOSTPYTHONPATH = ./hostpythonpath:' \
-			-e '/^HOSTPYTHON/s:=.*:= ./hostpython:' \
-			-e '/^HOSTPGEN/s:=.*:= ./Parser/hostpgen:' \
-			Makefile{.pre,} || die "sed failed"
-	fi
-
-	multijob_finish
-}
-
-src_compile() {
-	if tc-is-cross-compiler; then
-		cd "${WORKDIR}"/${CBUILD}
-		# Disable as many modules as possible -- but we need a few to install.
-		PYTHON_DISABLE_MODULES=$(
-			sed -n "/Extension('/{s:^.*Extension('::;s:'.*::;p}" "${S}"/setup.py | \
-				egrep -v '(unicodedata|time|cStringIO|_struct|binascii)'
-		) \
-		PTHON_DISABLE_SSL="1" \
-		SYSROOT= \
-		emake
-		# See comment in src_configure about these.
-		ln python ../${CHOST}/hostpython || die
-		ln Parser/pgen ../${CHOST}/Parser/hostpgen || die
-		ln -s ../${CBUILD}/build/lib.*/ ../${CHOST}/hostpythonpath || die
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	emake CPPFLAGS="" CFLAGS="" LDFLAGS=""
-
-	# Work around bug 329499. See also bug 413751 and 457194.
-	if has_version dev-libs/libffi[pax_kernel]; then
-		pax-mark E python
-	else
-		pax-mark m python
-	fi
-}
-
-src_test() {
-	# Tests will not work when cross compiling.
-	if tc-is-cross-compiler; then
-		elog "Disabling tests due to crosscompiling."
-		return
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-
-	# Skip failing tests.
-	local skipped_tests="gdb"
-
-	for test in ${skipped_tests}; do
-		mv "${S}"/Lib/test/test_${test}.py "${T}"
-	done
-
-	# Rerun failed tests in verbose mode (regrtest -w).
-	PYTHONDONTWRITEBYTECODE="" emake test EXTRATESTOPTS="-w" CPPFLAGS="" CFLAGS="" LDFLAGS="" < /dev/tty
-	local result="$?"
-
-	for test in ${skipped_tests}; do
-		mv "${T}/test_${test}.py" "${S}"/Lib/test
-	done
-
-	elog "The following tests have been skipped:"
-	for test in ${skipped_tests}; do
-		elog "test_${test}.py"
-	done
-
-	elog "If you would like to run them, you may:"
-	elog "cd '${EPREFIX}/usr/$(get_libdir)/python${SLOT}/test'"
-	elog "and run the tests separately."
-
-	if [[ "${result}" -ne 0 ]]; then
-		die "emake test failed"
-	fi
-}
-
-src_install() {
-	local libdir=${ED}/usr/$(get_libdir)/python${SLOT}
-
-	cd "${WORKDIR}"/${CHOST}
-	emake DESTDIR="${D}" altinstall
-
-	sed \
-		-e "s/\(CONFIGURE_LDFLAGS=\).*/\1/" \
-		-e "s/\(PY_LDFLAGS=\).*/\1/" \
-		-i "${libdir}/config-${SLOT}/Makefile" || die "sed failed"
-
-	# Backwards compat with Gentoo divergence.
-	dosym python${SLOT}-config /usr/bin/python-config-${SLOT}
-
-	# Fix collisions between different slots of Python.
-	rm "${ED}usr/$(get_libdir)/libpython3.so" || die
-
-	if use build; then
-		rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{idlelib,sqlite3,test,tkinter}
-	else
-		use elibc_uclibc && rm -fr "${libdir}/test"
-		use sqlite || rm -fr "${libdir}/"{sqlite3,test/test_sqlite*}
-		use tk || rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{idlelib,tkinter,test/test_tk*}
-	fi
-
-	use threads || rm -fr "${libdir}/multiprocessing"
-	use wininst || rm -f "${libdir}/distutils/command/"wininst-*.exe
-
-	dodoc "${S}"/Misc/{ACKS,HISTORY,NEWS}
-
-	if use examples; then
-		insinto /usr/share/doc/${PF}/examples
-		find "${S}"/Tools -name __pycache__ -print0 | xargs -0 rm -fr
-		doins -r "${S}"/Tools
-	fi
-	insinto /usr/share/gdb/auto-load/usr/$(get_libdir) #443510
-	local libname=$(printf 'e:\n\t@echo $(INSTSONAME)\ninclude Makefile\n' | \
-		emake --no-print-directory -s -f - 2>/dev/null)
-	newins "${S}"/Tools/gdb/libpython.py "${libname}"-gdb.py
-
-	newconfd "${FILESDIR}/pydoc.conf" pydoc-${SLOT}
-	newinitd "${FILESDIR}/pydoc.init" pydoc-${SLOT}
-	sed \
-		-e "s:@PYDOC_PORT_VARIABLE@:PYDOC${SLOT/./_}_PORT:" \
-		-e "s:@PYDOC@:pydoc${SLOT}:" \
-		-i "${ED}etc/conf.d/pydoc-${SLOT}" "${ED}etc/init.d/pydoc-${SLOT}" || die "sed failed"
-
-	# for python-exec
-	python_export python${SLOT} EPYTHON PYTHON PYTHON_SITEDIR
-
-	# if not using a cross-compiler, use the fresh binary
-	if ! tc-is-cross-compiler; then
-		local PYTHON=./python \
-			LD_LIBRARY_PATH=${LD_LIBRARY_PATH+${LD_LIBRARY_PATH}:}.
-		export LD_LIBRARY_PATH
-	fi
-
-	echo "EPYTHON='${EPYTHON}'" > epython.py
-	python_domodule epython.py
-}
-
-pkg_preinst() {
-	if has_version "<${CATEGORY}/${PN}-${SLOT}" && ! has_version ">=${CATEGORY}/${PN}-${SLOT}_alpha"; then
-		python_updater_warning="1"
-	fi
-}
-
-eselect_python_update() {
-	if [[ -z "$(eselect python show)" || ! -f "${EROOT}usr/bin/$(eselect python show)" ]]; then
-		eselect python update
-	fi
-
-	if [[ -z "$(eselect python show --python${PV%%.*})" || ! -f "${EROOT}usr/bin/$(eselect python show --python${PV%%.*})" ]]; then
-		eselect python update --python${PV%%.*}
-	fi
-}
-
-pkg_postinst() {
-	eselect_python_update
-
-	if [[ "${python_updater_warning}" == "1" ]]; then
-		ewarn "You have just upgraded from an older version of Python."
-		ewarn "You should switch active version of Python ${PV%%.*} and run"
-		ewarn "'python-updater [options]' to rebuild Python modules."
-	fi
-}
-
-pkg_postrm() {
-	eselect_python_update
-}
diff --git a/dev-lang/python/python-3.3.1.ebuild b/dev-lang/python/python-3.3.1.ebuild
deleted file mode 100644
index 9e4db78f4a4a..000000000000
--- a/dev-lang/python/python-3.3.1.ebuild
+++ /dev/null
@@ -1,352 +0,0 @@
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/python-3.3.1.ebuild,v 1.5 2013/08/28 15:59:25 floppym Exp $
-
-EAPI="3"
-WANT_AUTOMAKE="none"
-WANT_LIBTOOL="none"
-
-inherit autotools eutils flag-o-matic multilib pax-utils python-utils-r1 toolchain-funcs multiprocessing
-
-MY_P="Python-${PV}"
-PATCHSET_REVISION="3"
-
-DESCRIPTION="An interpreted, interactive, object-oriented programming language"
-HOMEPAGE="http://www.python.org/"
-SRC_URI="http://www.python.org/ftp/python/${PV}/${MY_P}.tar.xz
-	mirror://gentoo/python-gentoo-patches-${PV}-${PATCHSET_REVISION}.tar.bz2"
-
-LICENSE="PSF-2"
-SLOT="3.3"
-KEYWORDS=""
-IUSE="build doc elibc_uclibc examples gdbm hardened ipv6 +ncurses +readline sqlite +ssl +threads tk wininst +xml"
-
-# Do not add a dependency on dev-lang/python to this ebuild.
-# If you need to apply a patch which requires python for bootstrapping, please
-# run the bootstrap code on your dev box and include the results in the
-# patchset. See bug 447752.
-
-RDEPEND="app-arch/bzip2
-	>=sys-libs/zlib-1.1.3
-	virtual/libffi
-	virtual/libintl
-	!build? (
-		gdbm? ( sys-libs/gdbm[berkdb] )
-		ncurses? (
-			>=sys-libs/ncurses-5.2
-			readline? ( >=sys-libs/readline-4.1 )
-		)
-		sqlite? ( >=dev-db/sqlite-3.3.8:3 )
-		ssl? ( dev-libs/openssl )
-		tk? (
-			>=dev-lang/tk-8.0
-			dev-tcltk/blt
-		)
-		xml? ( >=dev-libs/expat-2.1 )
-	)
-	!!<sys-apps/sandbox-2.6-r1"
-DEPEND="${RDEPEND}
-	virtual/pkgconfig
-	>=sys-devel/autoconf-2.65
-	!sys-devel/gcc[libffi]"
-RDEPEND+=" !build? ( app-misc/mime-types )
-	doc? ( dev-python/python-docs:${SLOT} )"
-PDEPEND="app-admin/eselect-python
-	app-admin/python-updater"
-
-S="${WORKDIR}/${MY_P}"
-
-src_prepare() {
-	# Ensure that internal copies of expat, libffi and zlib are not used.
-	rm -fr Modules/expat
-	rm -fr Modules/_ctypes/libffi*
-	rm -fr Modules/zlib
-
-	EPATCH_SUFFIX="patch" epatch "${WORKDIR}/${PV}-${PATCHSET_REVISION}"
-
-	sed -i -e "s:@@GENTOO_LIBDIR@@:$(get_libdir):g" \
-		Lib/distutils/command/install.py \
-		Lib/distutils/sysconfig.py \
-		Lib/site.py \
-		Lib/sysconfig.py \
-		Lib/test/test_site.py \
-		Makefile.pre.in \
-		Modules/Setup.dist \
-		Modules/getpath.c \
-		setup.py || die "sed failed to replace @@GENTOO_LIBDIR@@"
-
-	# Disable ABI flags.
-	sed -e "s/ABIFLAGS=\"\${ABIFLAGS}.*\"/:/" -i configure.ac || die "sed failed"
-
-	epatch_user
-
-	eautoconf
-	eautoheader
-}
-
-src_configure() {
-	if use build; then
-		# Disable extraneous modules with extra dependencies.
-		export PYTHON_DISABLE_MODULES="gdbm _curses _curses_panel readline _sqlite3 _tkinter _elementtree pyexpat"
-		export PYTHON_DISABLE_SSL="1"
-	else
-		local disable
-		use gdbm     || disable+=" gdbm"
-		use ncurses  || disable+=" _curses _curses_panel"
-		use readline || disable+=" readline"
-		use sqlite   || disable+=" _sqlite3"
-		use ssl      || export PYTHON_DISABLE_SSL="1"
-		use tk       || disable+=" _tkinter"
-		use xml      || disable+=" _elementtree pyexpat" # _elementtree uses pyexpat.
-		export PYTHON_DISABLE_MODULES="${disable}"
-
-		if ! use xml; then
-			ewarn "You have configured Python without XML support."
-			ewarn "This is NOT a recommended configuration as you"
-			ewarn "may face problems parsing any XML documents."
-		fi
-	fi
-
-	if [[ -n "${PYTHON_DISABLE_MODULES}" ]]; then
-		einfo "Disabled modules: ${PYTHON_DISABLE_MODULES}"
-	fi
-
-	if [[ "$(gcc-major-version)" -ge 4 ]]; then
-		append-flags -fwrapv
-	fi
-
-	filter-flags -malign-double
-
-	[[ "${ARCH}" == "alpha" ]] && append-flags -fPIC
-
-	# https://bugs.gentoo.org/show_bug.cgi?id=50309
-	if is-flagq -O3; then
-		is-flagq -fstack-protector-all && replace-flags -O3 -O2
-		use hardened && replace-flags -O3 -O2
-	fi
-
-	# Run the configure scripts in parallel.
-	multijob_init
-
-	mkdir -p "${WORKDIR}"/{${CBUILD},${CHOST}}
-
-	if tc-is-cross-compiler; then
-		(
-		multijob_child_init
-		cd "${WORKDIR}"/${CBUILD} >/dev/null
-		OPT="-O1" CFLAGS="" CPPFLAGS="" LDFLAGS="" CC="" \
-		"${S}"/configure \
-			--{build,host}=${CBUILD} \
-			|| die "cross-configure failed"
-		) &
-		multijob_post_fork
-
-		# The configure script assumes it's buggy when cross-compiling.
-		export ac_cv_buggy_getaddrinfo=no
-		export ac_cv_have_long_long_format=yes
-	fi
-
-	# Export CXX so it ends up in /usr/lib/python3.X/config/Makefile.
-	tc-export CXX
-	# The configure script fails to use pkg-config correctly.
-	# http://bugs.python.org/issue15506
-	export ac_cv_path_PKG_CONFIG=$(tc-getPKG_CONFIG)
-
-	# Set LDFLAGS so we link modules with -lpython3.2 correctly.
-	# Needed on FreeBSD unless Python 3.2 is already installed.
-	# Please query BSD team before removing this!
-	append-ldflags "-L."
-
-	local dbmliborder
-	if use gdbm; then
-		dbmliborder+="${dbmliborder:+:}gdbm"
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	ECONF_SOURCE=${S} OPT="" \
-	econf \
-		--with-fpectl \
-		--enable-shared \
-		$(use_enable ipv6) \
-		$(use_with threads) \
-		--infodir='${prefix}/share/info' \
-		--mandir='${prefix}/share/man' \
-		--with-computed-gotos \
-		--with-dbmliborder="${dbmliborder}" \
-		--with-libc="" \
-		--enable-loadable-sqlite-extensions \
-		--with-system-expat \
-		--with-system-ffi
-
-	if tc-is-cross-compiler; then
-		# Modify the Makefile.pre so we don't regen for the host/ one.
-		# We need to link the host python programs into $PWD and run
-		# them from here because the distutils sysconfig module will
-		# parse Makefile/etc... from argv[0], and we need it to pick
-		# up the target settings, not the host ones.
-		sed -i \
-			-e '1iHOSTPYTHONPATH = ./hostpythonpath:' \
-			-e '/^HOSTPYTHON/s:=.*:= ./hostpython:' \
-			-e '/^HOSTPGEN/s:=.*:= ./Parser/hostpgen:' \
-			Makefile{.pre,} || die "sed failed"
-	fi
-
-	multijob_finish
-}
-
-src_compile() {
-	if tc-is-cross-compiler; then
-		cd "${WORKDIR}"/${CBUILD}
-		# Disable as many modules as possible -- but we need a few to install.
-		PYTHON_DISABLE_MODULES=$(
-			sed -n "/Extension('/{s:^.*Extension('::;s:'.*::;p}" "${S}"/setup.py | \
-				egrep -v '(unicodedata|time|cStringIO|_struct|binascii)'
-		) \
-		PTHON_DISABLE_SSL="1" \
-		SYSROOT= \
-		emake || die "cross-make failed"
-		# See comment in src_configure about these.
-		ln python ../${CHOST}/hostpython || die
-		ln Parser/pgen ../${CHOST}/Parser/hostpgen || die
-		ln -s ../${CBUILD}/build/lib.*/ ../${CHOST}/hostpythonpath || die
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	emake CPPFLAGS="" CFLAGS="" LDFLAGS="" || die "emake failed"
-
-	# Work around bug 329499. See also bug 413751 and 457194.
-	if has_version dev-libs/libffi[pax_kernel]; then
-		pax-mark E python
-	else
-		pax-mark m python
-	fi
-}
-
-src_test() {
-	# Tests will not work when cross compiling.
-	if tc-is-cross-compiler; then
-		elog "Disabling tests due to crosscompiling."
-		return
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-
-	# Skip failing tests.
-	local skipped_tests="gdb"
-
-	for test in ${skipped_tests}; do
-		mv "${S}"/Lib/test/test_${test}.py "${T}"
-	done
-
-	# Rerun failed tests in verbose mode (regrtest -w).
-	PYTHONDONTWRITEBYTECODE="" emake test EXTRATESTOPTS="-w" CPPFLAGS="" CFLAGS="" LDFLAGS="" < /dev/tty
-	local result="$?"
-
-	for test in ${skipped_tests}; do
-		mv "${T}/test_${test}.py" "${S}"/Lib/test
-	done
-
-	elog "The following tests have been skipped:"
-	for test in ${skipped_tests}; do
-		elog "test_${test}.py"
-	done
-
-	elog "If you would like to run them, you may:"
-	elog "cd '${EPREFIX}/usr/$(get_libdir)/python${SLOT}/test'"
-	elog "and run the tests separately."
-
-	if [[ "${result}" -ne 0 ]]; then
-		die "emake test failed"
-	fi
-}
-
-src_install() {
-	local libdir=${ED}/usr/$(get_libdir)/python${SLOT}
-
-	cd "${WORKDIR}"/${CHOST}
-	emake DESTDIR="${D}" altinstall || die "emake altinstall failed"
-
-	sed \
-		-e "s/\(CONFIGURE_LDFLAGS=\).*/\1/" \
-		-e "s/\(PY_LDFLAGS=\).*/\1/" \
-		-i "${libdir}/config-${SLOT}/Makefile" || die "sed failed"
-
-	# Backwards compat with Gentoo divergence.
-	dosym python${SLOT}-config /usr/bin/python-config-${SLOT} || die
-
-	# Fix collisions between different slots of Python.
-	rm -f "${ED}usr/$(get_libdir)/libpython3.so"
-
-	if use build; then
-		rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{idlelib,sqlite3,test,tkinter}
-	else
-		use elibc_uclibc && rm -fr "${libdir}/test"
-		use sqlite || rm -fr "${libdir}/"{sqlite3,test/test_sqlite*}
-		use tk || rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{idlelib,tkinter,test/test_tk*}
-	fi
-
-	use threads || rm -fr "${libdir}/multiprocessing"
-	use wininst || rm -f "${libdir}/distutils/command/"wininst-*.exe
-
-	dodoc "${S}"/Misc/{ACKS,HISTORY,NEWS} || die "dodoc failed"
-
-	if use examples; then
-		insinto /usr/share/doc/${PF}/examples
-		find "${S}"/Tools -name __pycache__ -print0 | xargs -0 rm -fr
-		doins -r "${S}"/Tools || die "doins failed"
-	fi
-	insinto /usr/share/gdb/auto-load/usr/$(get_libdir) #443510
-	local libname=$(printf 'e:\n\t@echo $(INSTSONAME)\ninclude Makefile\n' | \
-		emake --no-print-directory -s -f - 2>/dev/null)
-	newins "${S}"/Tools/gdb/libpython.py "${libname}"-gdb.py
-
-	newconfd "${FILESDIR}/pydoc.conf" pydoc-${SLOT} || die "newconfd failed"
-	newinitd "${FILESDIR}/pydoc.init" pydoc-${SLOT} || die "newinitd failed"
-	sed \
-		-e "s:@PYDOC_PORT_VARIABLE@:PYDOC${SLOT/./_}_PORT:" \
-		-e "s:@PYDOC@:pydoc${SLOT}:" \
-		-i "${ED}etc/conf.d/pydoc-${SLOT}" "${ED}etc/init.d/pydoc-${SLOT}" || die "sed failed"
-
-	# for python-exec
-	python_export python${SLOT} EPYTHON PYTHON PYTHON_SITEDIR
-
-	# if not using a cross-compiler, use the fresh binary
-	if ! tc-is-cross-compiler; then
-		local PYTHON=./python \
-			LD_LIBRARY_PATH=${LD_LIBRARY_PATH+${LD_LIBRARY_PATH}:}.
-		export LD_LIBRARY_PATH
-	fi
-
-	echo "EPYTHON='${EPYTHON}'" > epython.py
-	python_domodule epython.py
-}
-
-pkg_preinst() {
-	if has_version "<${CATEGORY}/${PN}-${SLOT}" && ! has_version ">=${CATEGORY}/${PN}-${SLOT}_alpha"; then
-		python_updater_warning="1"
-	fi
-}
-
-eselect_python_update() {
-	if [[ -z "$(eselect python show)" || ! -f "${EROOT}usr/bin/$(eselect python show)" ]]; then
-		eselect python update
-	fi
-
-	if [[ -z "$(eselect python show --python${PV%%.*})" || ! -f "${EROOT}usr/bin/$(eselect python show --python${PV%%.*})" ]]; then
-		eselect python update --python${PV%%.*}
-	fi
-}
-
-pkg_postinst() {
-	eselect_python_update
-
-	if [[ "${python_updater_warning}" == "1" ]]; then
-		ewarn "You have just upgraded from an older version of Python."
-		ewarn "You should switch active version of Python ${PV%%.*} and run"
-		ewarn "'python-updater [options]' to rebuild Python modules."
-	fi
-}
-
-pkg_postrm() {
-	eselect_python_update
-}
diff --git a/dev-lang/python/python-3.3.2-r1.ebuild b/dev-lang/python/python-3.3.2-r1.ebuild
deleted file mode 100644
index f516fb8e59c9..000000000000
--- a/dev-lang/python/python-3.3.2-r1.ebuild
+++ /dev/null
@@ -1,354 +0,0 @@
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/python-3.3.2-r1.ebuild,v 1.2 2013/08/28 15:59:25 floppym Exp $
-
-EAPI="3"
-WANT_AUTOMAKE="none"
-WANT_LIBTOOL="none"
-
-inherit autotools eutils flag-o-matic multilib pax-utils python-utils-r1 toolchain-funcs multiprocessing
-
-MY_P="Python-${PV}"
-PATCHSET_REVISION="1"
-
-DESCRIPTION="An interpreted, interactive, object-oriented programming language"
-HOMEPAGE="http://www.python.org/"
-SRC_URI="http://www.python.org/ftp/python/${PV}/${MY_P}.tar.xz
-	mirror://gentoo/python-gentoo-patches-${PV}-${PATCHSET_REVISION}.tar.xz"
-
-LICENSE="PSF-2"
-SLOT="3.3"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="build doc elibc_uclibc examples gdbm hardened ipv6 +ncurses +readline sqlite +ssl +threads tk wininst +xml"
-
-# Do not add a dependency on dev-lang/python to this ebuild.
-# If you need to apply a patch which requires python for bootstrapping, please
-# run the bootstrap code on your dev box and include the results in the
-# patchset. See bug 447752.
-
-RDEPEND="app-arch/bzip2
-	>=sys-libs/zlib-1.1.3
-	virtual/libffi
-	virtual/libintl
-	!build? (
-		gdbm? ( sys-libs/gdbm[berkdb] )
-		ncurses? (
-			>=sys-libs/ncurses-5.2
-			readline? ( >=sys-libs/readline-4.1 )
-		)
-		sqlite? ( >=dev-db/sqlite-3.3.8:3 )
-		ssl? ( dev-libs/openssl )
-		tk? (
-			>=dev-lang/tk-8.0
-			dev-tcltk/blt
-		)
-		xml? ( >=dev-libs/expat-2.1 )
-	)
-	!!<sys-apps/sandbox-2.6-r1"
-DEPEND="${RDEPEND}
-	virtual/pkgconfig
-	>=sys-devel/autoconf-2.65
-	!sys-devel/gcc[libffi]"
-RDEPEND+=" !build? ( app-misc/mime-types )
-	doc? ( dev-python/python-docs:${SLOT} )"
-PDEPEND="app-admin/eselect-python
-	app-admin/python-updater"
-
-S="${WORKDIR}/${MY_P}"
-
-src_prepare() {
-	# Ensure that internal copies of expat, libffi and zlib are not used.
-	rm -fr Modules/expat
-	rm -fr Modules/_ctypes/libffi*
-	rm -fr Modules/zlib
-
-	EPATCH_SUFFIX="patch" epatch "${WORKDIR}/${PV}-${PATCHSET_REVISION}"
-
-	epatch "${FILESDIR}/python-3.3-CVE-2013-2099.patch"
-
-	sed -i -e "s:@@GENTOO_LIBDIR@@:$(get_libdir):g" \
-		Lib/distutils/command/install.py \
-		Lib/distutils/sysconfig.py \
-		Lib/site.py \
-		Lib/sysconfig.py \
-		Lib/test/test_site.py \
-		Makefile.pre.in \
-		Modules/Setup.dist \
-		Modules/getpath.c \
-		setup.py || die "sed failed to replace @@GENTOO_LIBDIR@@"
-
-	# Disable ABI flags.
-	sed -e "s/ABIFLAGS=\"\${ABIFLAGS}.*\"/:/" -i configure.ac || die "sed failed"
-
-	epatch_user
-
-	eautoconf
-	eautoheader
-}
-
-src_configure() {
-	if use build; then
-		# Disable extraneous modules with extra dependencies.
-		export PYTHON_DISABLE_MODULES="gdbm _curses _curses_panel readline _sqlite3 _tkinter _elementtree pyexpat"
-		export PYTHON_DISABLE_SSL="1"
-	else
-		local disable
-		use gdbm     || disable+=" gdbm"
-		use ncurses  || disable+=" _curses _curses_panel"
-		use readline || disable+=" readline"
-		use sqlite   || disable+=" _sqlite3"
-		use ssl      || export PYTHON_DISABLE_SSL="1"
-		use tk       || disable+=" _tkinter"
-		use xml      || disable+=" _elementtree pyexpat" # _elementtree uses pyexpat.
-		export PYTHON_DISABLE_MODULES="${disable}"
-
-		if ! use xml; then
-			ewarn "You have configured Python without XML support."
-			ewarn "This is NOT a recommended configuration as you"
-			ewarn "may face problems parsing any XML documents."
-		fi
-	fi
-
-	if [[ -n "${PYTHON_DISABLE_MODULES}" ]]; then
-		einfo "Disabled modules: ${PYTHON_DISABLE_MODULES}"
-	fi
-
-	if [[ "$(gcc-major-version)" -ge 4 ]]; then
-		append-flags -fwrapv
-	fi
-
-	filter-flags -malign-double
-
-	[[ "${ARCH}" == "alpha" ]] && append-flags -fPIC
-
-	# https://bugs.gentoo.org/show_bug.cgi?id=50309
-	if is-flagq -O3; then
-		is-flagq -fstack-protector-all && replace-flags -O3 -O2
-		use hardened && replace-flags -O3 -O2
-	fi
-
-	# Run the configure scripts in parallel.
-	multijob_init
-
-	mkdir -p "${WORKDIR}"/{${CBUILD},${CHOST}}
-
-	if tc-is-cross-compiler; then
-		(
-		multijob_child_init
-		cd "${WORKDIR}"/${CBUILD} >/dev/null
-		OPT="-O1" CFLAGS="" CPPFLAGS="" LDFLAGS="" CC="" \
-		"${S}"/configure \
-			--{build,host}=${CBUILD} \
-			|| die "cross-configure failed"
-		) &
-		multijob_post_fork
-
-		# The configure script assumes it's buggy when cross-compiling.
-		export ac_cv_buggy_getaddrinfo=no
-		export ac_cv_have_long_long_format=yes
-	fi
-
-	# Export CXX so it ends up in /usr/lib/python3.X/config/Makefile.
-	tc-export CXX
-	# The configure script fails to use pkg-config correctly.
-	# http://bugs.python.org/issue15506
-	export ac_cv_path_PKG_CONFIG=$(tc-getPKG_CONFIG)
-
-	# Set LDFLAGS so we link modules with -lpython3.2 correctly.
-	# Needed on FreeBSD unless Python 3.2 is already installed.
-	# Please query BSD team before removing this!
-	append-ldflags "-L."
-
-	local dbmliborder
-	if use gdbm; then
-		dbmliborder+="${dbmliborder:+:}gdbm"
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	ECONF_SOURCE=${S} OPT="" \
-	econf \
-		--with-fpectl \
-		--enable-shared \
-		$(use_enable ipv6) \
-		$(use_with threads) \
-		--infodir='${prefix}/share/info' \
-		--mandir='${prefix}/share/man' \
-		--with-computed-gotos \
-		--with-dbmliborder="${dbmliborder}" \
-		--with-libc="" \
-		--enable-loadable-sqlite-extensions \
-		--with-system-expat \
-		--with-system-ffi
-
-	if tc-is-cross-compiler; then
-		# Modify the Makefile.pre so we don't regen for the host/ one.
-		# We need to link the host python programs into $PWD and run
-		# them from here because the distutils sysconfig module will
-		# parse Makefile/etc... from argv[0], and we need it to pick
-		# up the target settings, not the host ones.
-		sed -i \
-			-e '1iHOSTPYTHONPATH = ./hostpythonpath:' \
-			-e '/^HOSTPYTHON/s:=.*:= ./hostpython:' \
-			-e '/^HOSTPGEN/s:=.*:= ./Parser/hostpgen:' \
-			Makefile{.pre,} || die "sed failed"
-	fi
-
-	multijob_finish
-}
-
-src_compile() {
-	if tc-is-cross-compiler; then
-		cd "${WORKDIR}"/${CBUILD}
-		# Disable as many modules as possible -- but we need a few to install.
-		PYTHON_DISABLE_MODULES=$(
-			sed -n "/Extension('/{s:^.*Extension('::;s:'.*::;p}" "${S}"/setup.py | \
-				egrep -v '(unicodedata|time|cStringIO|_struct|binascii)'
-		) \
-		PTHON_DISABLE_SSL="1" \
-		SYSROOT= \
-		emake || die "cross-make failed"
-		# See comment in src_configure about these.
-		ln python ../${CHOST}/hostpython || die
-		ln Parser/pgen ../${CHOST}/Parser/hostpgen || die
-		ln -s ../${CBUILD}/build/lib.*/ ../${CHOST}/hostpythonpath || die
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	emake CPPFLAGS="" CFLAGS="" LDFLAGS="" || die "emake failed"
-
-	# Work around bug 329499. See also bug 413751 and 457194.
-	if has_version dev-libs/libffi[pax_kernel]; then
-		pax-mark E python
-	else
-		pax-mark m python
-	fi
-}
-
-src_test() {
-	# Tests will not work when cross compiling.
-	if tc-is-cross-compiler; then
-		elog "Disabling tests due to crosscompiling."
-		return
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-
-	# Skip failing tests.
-	local skipped_tests="gdb"
-
-	for test in ${skipped_tests}; do
-		mv "${S}"/Lib/test/test_${test}.py "${T}"
-	done
-
-	# Rerun failed tests in verbose mode (regrtest -w).
-	PYTHONDONTWRITEBYTECODE="" emake test EXTRATESTOPTS="-w" CPPFLAGS="" CFLAGS="" LDFLAGS="" < /dev/tty
-	local result="$?"
-
-	for test in ${skipped_tests}; do
-		mv "${T}/test_${test}.py" "${S}"/Lib/test
-	done
-
-	elog "The following tests have been skipped:"
-	for test in ${skipped_tests}; do
-		elog "test_${test}.py"
-	done
-
-	elog "If you would like to run them, you may:"
-	elog "cd '${EPREFIX}/usr/$(get_libdir)/python${SLOT}/test'"
-	elog "and run the tests separately."
-
-	if [[ "${result}" -ne 0 ]]; then
-		die "emake test failed"
-	fi
-}
-
-src_install() {
-	local libdir=${ED}/usr/$(get_libdir)/python${SLOT}
-
-	cd "${WORKDIR}"/${CHOST}
-	emake DESTDIR="${D}" altinstall || die "emake altinstall failed"
-
-	sed \
-		-e "s/\(CONFIGURE_LDFLAGS=\).*/\1/" \
-		-e "s/\(PY_LDFLAGS=\).*/\1/" \
-		-i "${libdir}/config-${SLOT}/Makefile" || die "sed failed"
-
-	# Backwards compat with Gentoo divergence.
-	dosym python${SLOT}-config /usr/bin/python-config-${SLOT} || die
-
-	# Fix collisions between different slots of Python.
-	rm -f "${ED}usr/$(get_libdir)/libpython3.so"
-
-	if use build; then
-		rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{idlelib,sqlite3,test,tkinter}
-	else
-		use elibc_uclibc && rm -fr "${libdir}/test"
-		use sqlite || rm -fr "${libdir}/"{sqlite3,test/test_sqlite*}
-		use tk || rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{idlelib,tkinter,test/test_tk*}
-	fi
-
-	use threads || rm -fr "${libdir}/multiprocessing"
-	use wininst || rm -f "${libdir}/distutils/command/"wininst-*.exe
-
-	dodoc "${S}"/Misc/{ACKS,HISTORY,NEWS} || die "dodoc failed"
-
-	if use examples; then
-		insinto /usr/share/doc/${PF}/examples
-		find "${S}"/Tools -name __pycache__ -print0 | xargs -0 rm -fr
-		doins -r "${S}"/Tools || die "doins failed"
-	fi
-	insinto /usr/share/gdb/auto-load/usr/$(get_libdir) #443510
-	local libname=$(printf 'e:\n\t@echo $(INSTSONAME)\ninclude Makefile\n' | \
-		emake --no-print-directory -s -f - 2>/dev/null)
-	newins "${S}"/Tools/gdb/libpython.py "${libname}"-gdb.py
-
-	newconfd "${FILESDIR}/pydoc.conf" pydoc-${SLOT} || die "newconfd failed"
-	newinitd "${FILESDIR}/pydoc.init" pydoc-${SLOT} || die "newinitd failed"
-	sed \
-		-e "s:@PYDOC_PORT_VARIABLE@:PYDOC${SLOT/./_}_PORT:" \
-		-e "s:@PYDOC@:pydoc${SLOT}:" \
-		-i "${ED}etc/conf.d/pydoc-${SLOT}" "${ED}etc/init.d/pydoc-${SLOT}" || die "sed failed"
-
-	# for python-exec
-	python_export python${SLOT} EPYTHON PYTHON PYTHON_SITEDIR
-
-	# if not using a cross-compiler, use the fresh binary
-	if ! tc-is-cross-compiler; then
-		local PYTHON=./python \
-			LD_LIBRARY_PATH=${LD_LIBRARY_PATH+${LD_LIBRARY_PATH}:}.
-		export LD_LIBRARY_PATH
-	fi
-
-	echo "EPYTHON='${EPYTHON}'" > epython.py
-	python_domodule epython.py
-}
-
-pkg_preinst() {
-	if has_version "<${CATEGORY}/${PN}-${SLOT}" && ! has_version ">=${CATEGORY}/${PN}-${SLOT}_alpha"; then
-		python_updater_warning="1"
-	fi
-}
-
-eselect_python_update() {
-	if [[ -z "$(eselect python show)" || ! -f "${EROOT}usr/bin/$(eselect python show)" ]]; then
-		eselect python update
-	fi
-
-	if [[ -z "$(eselect python show --python${PV%%.*})" || ! -f "${EROOT}usr/bin/$(eselect python show --python${PV%%.*})" ]]; then
-		eselect python update --python${PV%%.*}
-	fi
-}
-
-pkg_postinst() {
-	eselect_python_update
-
-	if [[ "${python_updater_warning}" == "1" ]]; then
-		ewarn "You have just upgraded from an older version of Python."
-		ewarn "You should switch active version of Python ${PV%%.*} and run"
-		ewarn "'python-updater [options]' to rebuild Python modules."
-	fi
-}
-
-pkg_postrm() {
-	eselect_python_update
-}
diff --git a/dev-lang/python/python-3.3.2.ebuild b/dev-lang/python/python-3.3.2.ebuild
deleted file mode 100644
index 40427bc8d02d..000000000000
--- a/dev-lang/python/python-3.3.2.ebuild
+++ /dev/null
@@ -1,352 +0,0 @@
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/python/python-3.3.2.ebuild,v 1.2 2013/08/28 15:59:25 floppym Exp $
-
-EAPI="3"
-WANT_AUTOMAKE="none"
-WANT_LIBTOOL="none"
-
-inherit autotools eutils flag-o-matic multilib pax-utils python-utils-r1 toolchain-funcs multiprocessing
-
-MY_P="Python-${PV}"
-PATCHSET_REVISION="1"
-
-DESCRIPTION="An interpreted, interactive, object-oriented programming language"
-HOMEPAGE="http://www.python.org/"
-SRC_URI="http://www.python.org/ftp/python/${PV}/${MY_P}.tar.xz
-	mirror://gentoo/python-gentoo-patches-${PV}-${PATCHSET_REVISION}.tar.xz"
-
-LICENSE="PSF-2"
-SLOT="3.3"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~sparc-fbsd ~x86-fbsd"
-IUSE="build doc elibc_uclibc examples gdbm hardened ipv6 +ncurses +readline sqlite +ssl +threads tk wininst +xml"
-
-# Do not add a dependency on dev-lang/python to this ebuild.
-# If you need to apply a patch which requires python for bootstrapping, please
-# run the bootstrap code on your dev box and include the results in the
-# patchset. See bug 447752.
-
-RDEPEND="app-arch/bzip2
-	>=sys-libs/zlib-1.1.3
-	virtual/libffi
-	virtual/libintl
-	!build? (
-		gdbm? ( sys-libs/gdbm[berkdb] )
-		ncurses? (
-			>=sys-libs/ncurses-5.2
-			readline? ( >=sys-libs/readline-4.1 )
-		)
-		sqlite? ( >=dev-db/sqlite-3.3.8:3 )
-		ssl? ( dev-libs/openssl )
-		tk? (
-			>=dev-lang/tk-8.0
-			dev-tcltk/blt
-		)
-		xml? ( >=dev-libs/expat-2.1 )
-	)
-	!!<sys-apps/sandbox-2.6-r1"
-DEPEND="${RDEPEND}
-	virtual/pkgconfig
-	>=sys-devel/autoconf-2.65
-	!sys-devel/gcc[libffi]"
-RDEPEND+=" !build? ( app-misc/mime-types )
-	doc? ( dev-python/python-docs:${SLOT} )"
-PDEPEND="app-admin/eselect-python
-	app-admin/python-updater"
-
-S="${WORKDIR}/${MY_P}"
-
-src_prepare() {
-	# Ensure that internal copies of expat, libffi and zlib are not used.
-	rm -fr Modules/expat
-	rm -fr Modules/_ctypes/libffi*
-	rm -fr Modules/zlib
-
-	EPATCH_SUFFIX="patch" epatch "${WORKDIR}/${PV}-${PATCHSET_REVISION}"
-
-	sed -i -e "s:@@GENTOO_LIBDIR@@:$(get_libdir):g" \
-		Lib/distutils/command/install.py \
-		Lib/distutils/sysconfig.py \
-		Lib/site.py \
-		Lib/sysconfig.py \
-		Lib/test/test_site.py \
-		Makefile.pre.in \
-		Modules/Setup.dist \
-		Modules/getpath.c \
-		setup.py || die "sed failed to replace @@GENTOO_LIBDIR@@"
-
-	# Disable ABI flags.
-	sed -e "s/ABIFLAGS=\"\${ABIFLAGS}.*\"/:/" -i configure.ac || die "sed failed"
-
-	epatch_user
-
-	eautoconf
-	eautoheader
-}
-
-src_configure() {
-	if use build; then
-		# Disable extraneous modules with extra dependencies.
-		export PYTHON_DISABLE_MODULES="gdbm _curses _curses_panel readline _sqlite3 _tkinter _elementtree pyexpat"
-		export PYTHON_DISABLE_SSL="1"
-	else
-		local disable
-		use gdbm     || disable+=" gdbm"
-		use ncurses  || disable+=" _curses _curses_panel"
-		use readline || disable+=" readline"
-		use sqlite   || disable+=" _sqlite3"
-		use ssl      || export PYTHON_DISABLE_SSL="1"
-		use tk       || disable+=" _tkinter"
-		use xml      || disable+=" _elementtree pyexpat" # _elementtree uses pyexpat.
-		export PYTHON_DISABLE_MODULES="${disable}"
-
-		if ! use xml; then
-			ewarn "You have configured Python without XML support."
-			ewarn "This is NOT a recommended configuration as you"
-			ewarn "may face problems parsing any XML documents."
-		fi
-	fi
-
-	if [[ -n "${PYTHON_DISABLE_MODULES}" ]]; then
-		einfo "Disabled modules: ${PYTHON_DISABLE_MODULES}"
-	fi
-
-	if [[ "$(gcc-major-version)" -ge 4 ]]; then
-		append-flags -fwrapv
-	fi
-
-	filter-flags -malign-double
-
-	[[ "${ARCH}" == "alpha" ]] && append-flags -fPIC
-
-	# https://bugs.gentoo.org/show_bug.cgi?id=50309
-	if is-flagq -O3; then
-		is-flagq -fstack-protector-all && replace-flags -O3 -O2
-		use hardened && replace-flags -O3 -O2
-	fi
-
-	# Run the configure scripts in parallel.
-	multijob_init
-
-	mkdir -p "${WORKDIR}"/{${CBUILD},${CHOST}}
-
-	if tc-is-cross-compiler; then
-		(
-		multijob_child_init
-		cd "${WORKDIR}"/${CBUILD} >/dev/null
-		OPT="-O1" CFLAGS="" CPPFLAGS="" LDFLAGS="" CC="" \
-		"${S}"/configure \
-			--{build,host}=${CBUILD} \
-			|| die "cross-configure failed"
-		) &
-		multijob_post_fork
-
-		# The configure script assumes it's buggy when cross-compiling.
-		export ac_cv_buggy_getaddrinfo=no
-		export ac_cv_have_long_long_format=yes
-	fi
-
-	# Export CXX so it ends up in /usr/lib/python3.X/config/Makefile.
-	tc-export CXX
-	# The configure script fails to use pkg-config correctly.
-	# http://bugs.python.org/issue15506
-	export ac_cv_path_PKG_CONFIG=$(tc-getPKG_CONFIG)
-
-	# Set LDFLAGS so we link modules with -lpython3.2 correctly.
-	# Needed on FreeBSD unless Python 3.2 is already installed.
-	# Please query BSD team before removing this!
-	append-ldflags "-L."
-
-	local dbmliborder
-	if use gdbm; then
-		dbmliborder+="${dbmliborder:+:}gdbm"
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	ECONF_SOURCE=${S} OPT="" \
-	econf \
-		--with-fpectl \
-		--enable-shared \
-		$(use_enable ipv6) \
-		$(use_with threads) \
-		--infodir='${prefix}/share/info' \
-		--mandir='${prefix}/share/man' \
-		--with-computed-gotos \
-		--with-dbmliborder="${dbmliborder}" \
-		--with-libc="" \
-		--enable-loadable-sqlite-extensions \
-		--with-system-expat \
-		--with-system-ffi
-
-	if tc-is-cross-compiler; then
-		# Modify the Makefile.pre so we don't regen for the host/ one.
-		# We need to link the host python programs into $PWD and run
-		# them from here because the distutils sysconfig module will
-		# parse Makefile/etc... from argv[0], and we need it to pick
-		# up the target settings, not the host ones.
-		sed -i \
-			-e '1iHOSTPYTHONPATH = ./hostpythonpath:' \
-			-e '/^HOSTPYTHON/s:=.*:= ./hostpython:' \
-			-e '/^HOSTPGEN/s:=.*:= ./Parser/hostpgen:' \
-			Makefile{.pre,} || die "sed failed"
-	fi
-
-	multijob_finish
-}
-
-src_compile() {
-	if tc-is-cross-compiler; then
-		cd "${WORKDIR}"/${CBUILD}
-		# Disable as many modules as possible -- but we need a few to install.
-		PYTHON_DISABLE_MODULES=$(
-			sed -n "/Extension('/{s:^.*Extension('::;s:'.*::;p}" "${S}"/setup.py | \
-				egrep -v '(unicodedata|time|cStringIO|_struct|binascii)'
-		) \
-		PTHON_DISABLE_SSL="1" \
-		SYSROOT= \
-		emake || die "cross-make failed"
-		# See comment in src_configure about these.
-		ln python ../${CHOST}/hostpython || die
-		ln Parser/pgen ../${CHOST}/Parser/hostpgen || die
-		ln -s ../${CBUILD}/build/lib.*/ ../${CHOST}/hostpythonpath || die
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-	emake CPPFLAGS="" CFLAGS="" LDFLAGS="" || die "emake failed"
-
-	# Work around bug 329499. See also bug 413751 and 457194.
-	if has_version dev-libs/libffi[pax_kernel]; then
-		pax-mark E python
-	else
-		pax-mark m python
-	fi
-}
-
-src_test() {
-	# Tests will not work when cross compiling.
-	if tc-is-cross-compiler; then
-		elog "Disabling tests due to crosscompiling."
-		return
-	fi
-
-	cd "${WORKDIR}"/${CHOST}
-
-	# Skip failing tests.
-	local skipped_tests="gdb"
-
-	for test in ${skipped_tests}; do
-		mv "${S}"/Lib/test/test_${test}.py "${T}"
-	done
-
-	# Rerun failed tests in verbose mode (regrtest -w).
-	PYTHONDONTWRITEBYTECODE="" emake test EXTRATESTOPTS="-w" CPPFLAGS="" CFLAGS="" LDFLAGS="" < /dev/tty
-	local result="$?"
-
-	for test in ${skipped_tests}; do
-		mv "${T}/test_${test}.py" "${S}"/Lib/test
-	done
-
-	elog "The following tests have been skipped:"
-	for test in ${skipped_tests}; do
-		elog "test_${test}.py"
-	done
-
-	elog "If you would like to run them, you may:"
-	elog "cd '${EPREFIX}/usr/$(get_libdir)/python${SLOT}/test'"
-	elog "and run the tests separately."
-
-	if [[ "${result}" -ne 0 ]]; then
-		die "emake test failed"
-	fi
-}
-
-src_install() {
-	local libdir=${ED}/usr/$(get_libdir)/python${SLOT}
-
-	cd "${WORKDIR}"/${CHOST}
-	emake DESTDIR="${D}" altinstall || die "emake altinstall failed"
-
-	sed \
-		-e "s/\(CONFIGURE_LDFLAGS=\).*/\1/" \
-		-e "s/\(PY_LDFLAGS=\).*/\1/" \
-		-i "${libdir}/config-${SLOT}/Makefile" || die "sed failed"
-
-	# Backwards compat with Gentoo divergence.
-	dosym python${SLOT}-config /usr/bin/python-config-${SLOT} || die
-
-	# Fix collisions between different slots of Python.
-	rm -f "${ED}usr/$(get_libdir)/libpython3.so"
-
-	if use build; then
-		rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{idlelib,sqlite3,test,tkinter}
-	else
-		use elibc_uclibc && rm -fr "${libdir}/test"
-		use sqlite || rm -fr "${libdir}/"{sqlite3,test/test_sqlite*}
-		use tk || rm -fr "${ED}usr/bin/idle${SLOT}" "${libdir}/"{idlelib,tkinter,test/test_tk*}
-	fi
-
-	use threads || rm -fr "${libdir}/multiprocessing"
-	use wininst || rm -f "${libdir}/distutils/command/"wininst-*.exe
-
-	dodoc "${S}"/Misc/{ACKS,HISTORY,NEWS} || die "dodoc failed"
-
-	if use examples; then
-		insinto /usr/share/doc/${PF}/examples
-		find "${S}"/Tools -name __pycache__ -print0 | xargs -0 rm -fr
-		doins -r "${S}"/Tools || die "doins failed"
-	fi
-	insinto /usr/share/gdb/auto-load/usr/$(get_libdir) #443510
-	local libname=$(printf 'e:\n\t@echo $(INSTSONAME)\ninclude Makefile\n' | \
-		emake --no-print-directory -s -f - 2>/dev/null)
-	newins "${S}"/Tools/gdb/libpython.py "${libname}"-gdb.py
-
-	newconfd "${FILESDIR}/pydoc.conf" pydoc-${SLOT} || die "newconfd failed"
-	newinitd "${FILESDIR}/pydoc.init" pydoc-${SLOT} || die "newinitd failed"
-	sed \
-		-e "s:@PYDOC_PORT_VARIABLE@:PYDOC${SLOT/./_}_PORT:" \
-		-e "s:@PYDOC@:pydoc${SLOT}:" \
-		-i "${ED}etc/conf.d/pydoc-${SLOT}" "${ED}etc/init.d/pydoc-${SLOT}" || die "sed failed"
-
-	# for python-exec
-	python_export python${SLOT} EPYTHON PYTHON PYTHON_SITEDIR
-
-	# if not using a cross-compiler, use the fresh binary
-	if ! tc-is-cross-compiler; then
-		local PYTHON=./python \
-			LD_LIBRARY_PATH=${LD_LIBRARY_PATH+${LD_LIBRARY_PATH}:}.
-		export LD_LIBRARY_PATH
-	fi
-
-	echo "EPYTHON='${EPYTHON}'" > epython.py
-	python_domodule epython.py
-}
-
-pkg_preinst() {
-	if has_version "<${CATEGORY}/${PN}-${SLOT}" && ! has_version ">=${CATEGORY}/${PN}-${SLOT}_alpha"; then
-		python_updater_warning="1"
-	fi
-}
-
-eselect_python_update() {
-	if [[ -z "$(eselect python show)" || ! -f "${EROOT}usr/bin/$(eselect python show)" ]]; then
-		eselect python update
-	fi
-
-	if [[ -z "$(eselect python show --python${PV%%.*})" || ! -f "${EROOT}usr/bin/$(eselect python show --python${PV%%.*})" ]]; then
-		eselect python update --python${PV%%.*}
-	fi
-}
-
-pkg_postinst() {
-	eselect_python_update
-
-	if [[ "${python_updater_warning}" == "1" ]]; then
-		ewarn "You have just upgraded from an older version of Python."
-		ewarn "You should switch active version of Python ${PV%%.*} and run"
-		ewarn "'python-updater [options]' to rebuild Python modules."
-	fi
-}
-
-pkg_postrm() {
-	eselect_python_update
-}