bugs 13886 and 13920 squashed

3 files changed, 453 insertions, 1 deletions

diff --git a/sys-devel/perl/ChangeLog b/sys-devel/perl/ChangeLog
index a7a98d95d442..400fa3db5f5a 100644
--- a/sys-devel/perl/ChangeLog
+++ b/sys-devel/perl/ChangeLog
@@ -1,6 +1,16 @@
 # ChangeLog for sys-devel/perl
 # Copyright 2002 Gentoo Technologies, Inc.; Distributed under the GPL
-# $Header: /var/cvsroot/gentoo-x86/sys-devel/perl/ChangeLog,v 1.45 2003/01/15 12:46:16 jrray Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-devel/perl/ChangeLog,v 1.46 2003/01/16 01:38:31 mcummings Exp $
+
+*perl-5.8.0-r9 (15 Jan 2003)
+
+  15 Jan 2003; Michael Cummings <mcummings@gentoo.org> perl-5.8.0-r9;
+
+  Major typo corrections that affected the placement of scripts and the man
+  pages. There was a typo introduced into the 5.8 ebuilds early on that was
+  not caught until now that left the location of the man pages blank and that 
+  misset the /usr call for scripts placement from perl modules. This was caught
+  in bugs 13886 and 13920
 
   15 Jan 2003; J Robert Ray <jrray@gentoo.org> libperl_rebuilder : Fixed
   unfortunate typo.
diff --git a/sys-devel/perl/files/digest-perl-5.8.0-r9 b/sys-devel/perl/files/digest-perl-5.8.0-r9
new file mode 100644
index 000000000000..517f2bed79ae
--- /dev/null
+++ b/sys-devel/perl/files/digest-perl-5.8.0-r9
@@ -0,0 +1 @@
+MD5 d9bdb180620306023fd35901a2878b62 perl-5.8.0.tar.gz 11023084
diff --git a/sys-devel/perl/perl-5.8.0-r9.ebuild b/sys-devel/perl/perl-5.8.0-r9.ebuild
new file mode 100644
index 000000000000..df8c2cf8322a
--- /dev/null
+++ b/sys-devel/perl/perl-5.8.0-r9.ebuild
@@ -0,0 +1,441 @@
+# Copyright 1999-2002 Gentoo Technologies, Inc.
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-devel/perl/perl-5.8.0-r9.ebuild,v 1.1 2003/01/16 01:38:31 mcummings Exp $
+
+# The basic theory based on comments from Daniel Robbins <drobbins@gentoo.org>.
+#
+# We split the perl ebuild into libperl and perl.  The layout is as follows:
+#
+# libperl:
+#
+#  This is a slotted (SLOT=[0-9]*) ebuild, meaning we should be able to have a
+#  few versions that are not binary compadible installed.
+#
+#  How we get libperl.so multi-versioned, is by adding to the link command:
+#
+#    -Wl,-soname -Wl,libperl.so.`echo $(LIBPERL) | cut -d. -f3`
+#
+#  This gives us:
+#
+#    $(LIBPERL): $& perl$(OBJ_EXT) $(obj) $(LIBPERLEXPORT)
+#        $(LD) -o $@ $(SHRPLDFLAGS) perl$(OBJ_EXT) $(obj) \
+#              -Wl,-soname -Wl,libperl.so.`echo $(LIBPERL) | cut -d. -f3`
+#
+#  We then configure perl with LIBPERL set to:
+#
+#    LIBPERL="libperl.so.${SLOT}.`echo ${PV} | cut -d. -f1,2`"
+#
+#  Or with the variables defined in this ebuild:
+#
+#    LIBPERL="libperl.so.${PERLSLOT}.${SHORT_PV}"
+#
+#  The result is that our 'soname' is 'libperl.so.${PERLSLOT}' (at the time of
+#  writing this for perl-5.8.0, 'libperl.so.1'), causing all apps that is linked
+#  to libperl to link to 'libperl.so.${PERLSLOT}'.
+#
+#  If a new perl version, perl-z.y.z comes out that have a libperl not binary
+#  compatible with the previous version, we just keep the previous libperl
+#  installed, and all apps linked to it will still be able to use:
+#
+#    libperl.so.${PERLSLOT}'
+#
+#  while the new ones will link to:
+#
+#    libperl.so.$((PERLSLOT+1))'
+#
+# perl:
+#
+#  Not much to this one.  It compiles with a static libperl.a, and are unslotted
+#  (meaning SLOT=0).  We thus always have the latest *stable* perl version
+#  installed, with corrisponding version of libperl.  The perl ebuild will of
+#  course DEPEND on libperl.
+#
+# Martin Schlemmer <azarah@gentoo.org> (28 Dec 2002).
+
+
+IUSE="berkdb gdbm"
+
+inherit eutils
+
+# The slot of this binary compat version of libperl.so
+PERLSLOT="1"
+
+SHORT_PV="`echo ${PV} | cut -d. -f1,2`"
+MY_P="${P/lib}"
+S="${WORKDIR}/${MY_P}"
+DESCRIPTION="Larry Wall's Practical Extraction and Reporting Language"
+SRC_URI="ftp://ftp.perl.org/pub/CPAN/src/${MY_P}.tar.gz"
+HOMEPAGE="http://www.perl.org" 
+
+if [ "${PN}" = "libperl" ]
+then
+	SLOT="${PERLSLOT}"
+else
+	SLOT="0"
+fi
+
+LIBPERL="libperl.so.${PERLSLOT}.${SHORT_PV}"
+
+LICENSE="Artistic GPL-2"
+KEYWORDS="x86 sparc ~ppc ~alpha ~mips"
+
+DEPEND="sys-apps/groff
+	berkdb? ( >=sys-libs/db-3.2.3h-r3 =sys-libs/db-1.85-r1 )
+	gdbm? ( >=sys-libs/gdbm-1.8.0 )
+	>=sys-apps/portage-2.0.45-r4"
+if [ "${PN}" = "perl" ]
+then
+	DEPEND="${DEPEND}
+		=sys-devel/libperl-${PV}*"
+fi
+
+RDEPEND="berkdb? ( >=sys-libs/db-3.2.3h-r3 =sys-libs/db-1.85-r1 ) 
+	gdbm? ( >=sys-libs/gdbm-1.8.0 )"
+
+if [ "${PN}" = "libperl" ]
+then
+	# If we are installing a new version of libperl, we *have* to update perl as
+	# well, else all things linking to libperl.so will break at *build* time ..
+	PDEPEND=">=sys-devel/perl-${PV}"
+else
+	PDEPEND=">=dev-perl/Safe-2.09"
+fi
+
+pkg_setup() {
+	# I think this should rather be displayed if you *have* 'threads'
+	# in USE if it could break things ...
+	if [ -n "`use threads`" ]
+	then
+		ewarn ""
+		ewarn "PLEASE NOTE: You are compiling perl-5.8 with"
+		ewarn "threading enabled."
+		ewarn "Threading is not supported by all applications "
+		ewarn "that compile against perl. You use threading at "
+		ewarn "your own discretion. "
+		ewarn ""
+		sleep 10
+	else
+		ewarn ""
+		ewarn "PLEASE NOTE: If you want to compile perl-5.8 with"
+		ewarn "threading enabled , you must restart this emerge"
+		ewarn "with USE=threads emerge...."
+		ewarn "Threading is not supported by all applications "
+		ewarn "that compile against perl. You use threading at "
+		ewarn "your own discretion. "
+		ewarn ""
+		sleep 10
+	fi
+
+	if [ "${PN}" = "perl" -a ! -f /usr/lib/${LIBPERL} ]
+	then
+		# Make sure we have libperl installed ...
+		eerror "Cannot find /usr/lib/${LIBPERL}!  Make sure that you"
+		eerror "have sys-libs/libperl installed properly ..."
+		die "Cannot find /usr/lib/${LIBPERL}!"
+	fi
+}
+
+src_unpack() {
+
+	unpack ${A}
+
+	if [ "${PN}" = "libperl" ]
+	then
+		# Fix the build scripts to create libperl with a soname of ${SLOT}.
+		# We basically add:
+		#
+		#   -Wl,-soname -Wl,libperl.so.`echo $(LIBPERL) | cut -d. -f3`
+		#
+		# to the line that links libperl.so, and then set LIBPERL to:
+		#
+		#   LIBPERL=libperl.so.${SLOT}.`echo ${PV} | cut -d. -f1,2`
+		#
+		cd ${S}; epatch ${FILESDIR}/${P}-create-libperl-soname.patch
+	else
+		# Fix the definition of 'int sockatmark(int);' in perl.h to have __THROW.
+		# This fixes bug #12605.
+		# <azarah@gentoo.org> (28 Dec 2002).
+		cd ${S}; epatch ${FILESDIR}/${P}-sockatmark-should-__THROW.patch
+	fi
+}
+
+src_compile() {
+
+	export LC_ALL="C"
+	local myconf=""
+	
+	if [ "`use threads`" ]
+	then
+		einfo "using threads"
+		mythreading="-multi"
+		myconf="-Dusethreads ${myconf}"
+		myarch="${CHOST%%-*}-linux-thread"
+	else
+		myarch="${CHOST%%-*}-linux"
+	fi
+
+	if [ "`use gdbm`" ]
+	then
+		myconf="${myconf} -Di_gdbm"
+	fi
+	if [ "`use berkdb`" ]
+	then
+		myconf="${myconf} -Di_db -Di_ndbm"
+	else
+		myconf="${myconf} -Ui_db -Ui_ndbm"
+	fi
+	if [ "`use sparc`" ]
+	then
+		myconf="${myconf} -Ud_longdbl"
+	fi
+	if [ "`use sparc64`" ]
+	then
+		myconf="${myconf} -Ud_longdbl"
+	fi
+	
+	if [ "${PN}" = "libperl" ]
+	then
+		rm -f config.sh Policy.sh
+
+		sh Configure -des \
+			-Darchname="${myarch}" \
+			-Dcccdlflags='-fPIC' \
+			-Dccdlflags='-rdynamic' \
+			-Dcc='gcc' \
+			-Dprefix='/usr' \
+			-Dvendorprefix='/usr' \
+			-Dsiteprefix='/usr' \
+			-Dlocincpth=' ' \
+			-Doptimize="${CFLAGS}" \
+			-Duselargefiles \
+			-Duseshrplib \
+			-Dman3ext='3pm' \
+			-Dlibperl="${LIBPERL}" \
+			-Dd_dosuid \
+			-Dd_semctl_semun \
+			-Dcf_by='Gentoo' \
+			-Ud_csh \
+			${myconf} || die
+
+		make -f Makefile depend || die "Couldn't make libperl.so depends"
+		make -f Makefile ${LIBPERL} || die "Unable to make libperl.so" 
+		mv ${LIBPERL} ${WORKDIR}
+	else
+cat > config.over <<EOF
+installprefix=${D}/usr
+installarchlib=\`echo \$installarchlib | sed "s!\$prefix!\$installprefix!"\`
+installbin=\`echo \$installbin | sed "s!\$prefix!\$installprefix!"\`
+installman1dir=\`echo \$installman1dir | sed "s!\$prefix!\$installprefix!"\`
+installman3dir=\`echo \$installman3dir | sed "s!\$prefix!\$installprefix!"\`
+installman1dir=\`echo \$installman1dir | sed "s!/share/share/!/share/!"\`
+installman3dir=\`echo \$installman3dir | sed "s!/share/share/!/share/!"\`
+installman1dir=\`echo \$installman1dir | sed "s!/usr/man/!/usr/share/man/!"\`
+installman3dir=\`echo \$installman3dir | sed "s!/usr/man/!/usr/share/man/!"\`
+man1ext=1
+man3ext=3pm
+installprivlib=\`echo \$installprivlib | sed "s!\$prefix!\$installprefix!"\`
+installscript=\`echo \$installscript | sed "s!\$prefix!\$installprefix!"\`
+installsitelib=\`echo \$installsitelib | sed "s!\$prefix!\$installprefix!"\`
+installsitearch=\`echo \$installsitearch | sed "s!\$prefix!\$installprefix!"\`
+EOF
+sleep 10
+		sh Configure -des \
+			-Darchname="${myarch}" \
+			-Dcc='gcc' \
+			-Dprefix='/usr' \
+			-Dvendorprefix='/usr' \
+			-Dsiteprefix='/usr' \
+			-Dlocincpth=' ' \
+			-Doptimize="${CFLAGS}" \
+			-Duselargefiles \
+			-Dd_dosuid \
+			-Dd_semctl_semun \
+			-Dman3ext='3pm' \
+			-Dcf_by='Gentoo' \
+			-Ud_csh \
+			${myconf} || die "Unable to configure"
+			
+		make || die "Unable to make"
+	
+		make -i test CCDLFLAGS=
+	fi
+}
+
+src_install() {
+	
+	export LC_ALL="C"
+	
+	if [ "${PN}" = "libperl" ]
+	then
+		dolib.so ${WORKDIR}/${LIBPERL}
+		preplib
+	else
+		# Need to do this, else apps do not link to dynamic version of
+		# the library ...
+		local coredir="/usr/lib/perl5/${PV}/${myarch}${mythreading}/CORE"
+		dodir ${coredir}
+		dosym ../../../../${LIBPERL} ${coredir}/${LIBPERL}
+		dosym ../../../../${LIBPERL} ${coredir}/libperl.so.${PERLSLOT}
+		dosym ../../../../${LIBPERL} ${coredir}/libperl.so
+		
+		# Fix for "stupid" modules and programs
+		dodir /usr/lib/perl5/site_perl/${PV}/${myarch}${mythreading}
+
+		make DESTDIR="${D}" \
+			INSTALLMAN1DIR="${D}/usr/share/man/man1" \
+			INSTALLMAN3DIR="${D}/usr/share/man/man3" \
+			install || die "Unable to make install"
+
+		cp -f utils/h2ph utils/h2ph_patched
+		epatch ${FILESDIR}/perl-5.8.0-RC2-special-h2ph-not-failing-on-machine_ansi_header.patch
+
+		LD_LIBRARY_PATH=. ./perl -Ilib utils/h2ph_patched \
+			-a -d ${D}/usr/lib/perl5/${PV}/${myarch}${mythreading} <<EOF
+asm/termios.h
+syscall.h
+syslimits.h
+syslog.h
+sys/ioctl.h
+sys/socket.h
+sys/time.h
+wait.h
+EOF
+
+		# This is to fix a missing c flag for backwards compat
+		for i in `find ${D}/usr/lib/perl5 -iname "Config.pm"`;do
+			sed -e "s:ccflags=':ccflags='-DPERL5 :" \
+			    -e "s:cppflags=':cppflags='-DPERL5 :" \
+				${i} > ${i}.new &&\
+				mv ${i}.new ${i} || die "Sed failed"
+		done
+
+		# A poor fix for the miniperl issues
+		dosed 's:./miniperl:/usr/bin/perl:' /usr/lib/perl5/${PV}/ExtUtils/xsubpp
+		fperms 0444 /usr/lib/perl5/${PV}/ExtUtils/xsubpp
+		dosed 's:./miniperl:/usr/bin/perl:' /usr/bin/xsubpp
+		fperms 0755 /usr/bin/xsubpp
+
+
+		./perl installman \
+			--man1dir="${D}/usr/share/man/man1" --man1ext='1' \
+			--man3dir="${D}/usr/share/man/man3" --man3ext='3'
+
+		# This removes ${D} from Config.pm and .packlist
+		for i in `find ${D} -iname "Config.pm"` `find ${D} -iname ".packlist"`;do 
+			einfo "Removing ${D} from ${i}..."
+			sed -e "s:${D}::" ${i} > ${i}.new &&\
+				mv ${i}.new ${i} || die "Sed failed"
+		done
+	fi
+	
+	dodoc Changes* Artistic Copying README Todo* AUTHORS
+
+	if [ "${PN}" = "perl" ]
+	then
+		# HTML Documentation
+		# We expect errors, warnings, and such with the following. 
+
+		dodir /usr/share/doc/${PF}/html
+		./perl installhtml \
+			--podroot='.' \
+			--podpath='lib:ext:pod:vms' \
+			--recurse \
+			--htmldir="${D}/usr/share/doc/${PF}/html" \
+			--libpods='perlfunc:perlguts:perlvar:perlrun:perlop'
+	fi
+}
+
+pkg_postinst() {
+
+	# Make sure we do not have stale/invalid libperl.so 's ...
+	if [ -f "${ROOT}usr/lib/libperl.so" -a ! -L "${ROOT}usr/lib/libperl.so" ]
+	then
+		mv -f ${ROOT}usr/lib/libperl.so ${ROOT}usr/lib/libperl.so.old
+	fi
+
+	if [ "${PN}" = "libperl" ]
+	then
+		# Next bit is to try and setup the /usr/lib/libperl.so symlink
+		# properly ...
+		local libnumber="`ls -1 ${ROOT}usr/lib/libperl.so.?.* | grep -v '\.old' | wc -l`"
+		if [ "${libnumber}" -eq 1 ]
+		then
+			# Only this version of libperl is installed, so just link libperl.so
+			# to the *soname* version of it ...
+			ln -snf libperl.so.${PERLSLOT} ${ROOT}usr/lib/libperl.so
+		else
+			if [ -x "${ROOT}/usr/bin/perl" ]
+			then
+				# OK, we have more than one version .. first try to figure out
+				# if there are already a perl installed, if so, link libperl.so
+				# to that *soname* version of libperl.so ...
+				local perlversion="`${ROOT}/usr/bin/perl -V:version | cut -d\' -f2 | cut -d. -f1,2`"
+				
+				cd ${ROOT}usr/lib
+				# Link libperl.so to the *soname* versioned lib ...
+				ln -snf `echo libperl.so.?.${perlversion} | cut -d. -f1,2,3` libperl.so
+			else
+				local x latest
+				
+				# Nope, we are not so lucky ... try to figure out what version
+				# is the latest, and keep fingers crossed ...
+				for x in `ls -1 ${ROOT}usr/lib/libperl.so.?.*`
+				do
+					latest="${x}"
+				done
+				
+				cd ${ROOT}usr/lib
+				# Link libperl.so to the *soname* versioned lib ...
+				ln -snf `echo ${latest##*/} | cut -d. -f1,2,3` libperl.so
+			fi
+		fi
+	else
+		local perllib="`readlink -f ${ROOT}usr/lib/libperl.so | sed -e 's:^.*/::'`"
+
+		# If we are installing perl, we need the /usr/lib/libperl.so symlink to
+		# point to the version of perl we are running, else builing something
+		# against libperl.so will break ...
+		if [ "${perllib}" != "${LIBPERL}" ]
+		then
+			# Delete stale symlinks
+			rm -f ${ROOT}usr/lib/libperl.so
+			rm -f ${ROOT}usr/lib/libperl.so.${PERLSLOT}
+			# Regenerate libperl.so.${PERLSLOT}
+			ln -snf ${LIBPERL} ${ROOT}usr/lib/libperl.so.${PERLSLOT}
+			# Create libperl.so (we use the *soname* versioned lib here ..)
+			ln -snf libperl.so.${PERLSLOT} ${ROOT}usr/lib/libperl.so
+		fi
+		
+		if [ "${ROOT}" = "/" ]
+		then
+			ebegin "Converting C header files to the corresponding Perl format"
+			cd /usr/include; h2ph *.h sys/*.h
+		fi
+
+		eerror ""
+		eerror "If this is an upgrade to a perl 5.6.1 system,"
+		eerror "~OR~ an upgrade to a previous Gentoo release"
+		eerror "of perl 5.8.0, prior to -r8 "
+		eerror "you may need to recompile applications that"
+		eerror "were emerged against the old libperl.so"
+		eerror ""
+		eerror "${FILESDIR}/libperl_rebuilder is provided "
+		eerror "to assist with this. PLEASE DO NOT INTERRUPT"
+		eerror "THE RUNNING OF THIS SCRIPT. Part of the "
+		eerror "rebuilding of applications compiled against "
+		eerror "your old libperl involves temporarily unmerging"
+		eerror "them - interruptions could leave you with unmerged"
+		eerror "packages before they can be remerged."
+		eerror ""
+		eerror "If you have run the rebuilder and a package still gives"
+		eerror "you trouble, and re-emerging it fails to correct"
+		eerror "the problem, please check http://bugs.gentoo.org/"
+		eerror "for more information or to report a bug."
+		eerror ""
+		sleep 5
+		eerror ""
+		
+	fi
+}
+
+