-r2 addresses some issues with other apps being able to compile against

and use perl. This should fix them.

1 files changed, 153 insertions, 0 deletions

diff --git a/sys-devel/perl/perl-5.8.0-r2.ebuild b/sys-devel/perl/perl-5.8.0-r2.ebuild
new file mode 100644
index 000000000000..eba9ec31f4c7
--- /dev/null
+++ b/sys-devel/perl/perl-5.8.0-r2.ebuild
@@ -0,0 +1,153 @@
+# Copyright 1999-2002 Gentoo Technologies, Inc.
+# Distributed under the terms of the GNU General Public License, v2 or later
+# $Header: /var/cvsroot/gentoo-x86/sys-devel/perl/perl-5.8.0-r2.ebuild,v 1.1 2002/08/14 19:50:49 mcummings Exp $
+
+S=${WORKDIR}/${P}
+DESCRIPTION="Larry Wall's Practical Extraction and Reporting Language"
+SRC_URI="ftp://ftp.perl.org/pub/CPAN/src/${P}.tar.gz"
+HOMEPAGE="http://www.perl.org" 
+LICENSE="Artistic GPL-2"
+SLOT="0"
+KEYWORDS="x86"
+
+DEPEND="sys-apps/groff berkdb? ( >=sys-libs/db-3.2.3h-r3 =sys-libs/db-1.85-r1 ) gdbm? ( >=sys-libs/gdbm-1.8.0 )"
+
+RDEPEND="berkdb? ( >=sys-libs/db-3.2.3h-r3 =sys-libs/db-1.85-r1 ) gdbm? ( >=sys-libs/gdbm-1.8.0 )"
+    
+src_compile() {
+    local myconf
+	if [ "`use gdbm`" ]
+	then
+	 myconf="-Di_gdbm"
+	fi
+	if [ "`use berkdb`" ]
+	then
+	 myconf="${myconf} -Di_db -Di_ndbm"
+	else
+	 myconf="${myconf} -Ui_db -Ui_ndbm"
+	fi
+
+	cd ${S}
+
+	rm -f config.sh Policy.sh
+
+	sh Configure -des \
+		-Darchname=${CHOST%%-*}-linux \
+		-Dcc=gcc \
+		-Dcccdlflags='-fPIC' \
+		-Dccdlflags='-rdynamic' \
+		-Dprefix=/usr \
+		-Dlocincpth=' ' \
+		-Doptimize="${CFLAGS}" \
+		-Duselargefiles \
+		-Duseshrplib \
+		-Dlibperl=libperl.so \
+		-Dd_dosuid \
+		-Dd_semctl_semun \
+		-Dusethreads \
+		${myconf} || die
+
+	make -f Makefile depend || die "Couldn't make libperl.so depends"
+	make -f Makefile libperl.so || die "Unable to make libperl.so" 
+	mv libperl.so ${WORKDIR}
+
+
+	cd ${WORKDIR}
+	rm -rf ${S}
+	unpack ${A}
+	cd ${S}
+				
+
+	cat > config.over <<EOF
+installprefix=${D}/usr
+installarchlib=\`echo \$installarchlib | sed "s!\$prefix!\$installprefix!"\`
+installbin=\`echo \$installbin | sed "s!\$prefix!\$installprefix!"\`
+installman1dir=\`echo \$installman1dir | sed "s!\$prefix!\$installprefix!"\`
+installman3dir=\`echo \$installman3dir | sed "s!\$prefix!\$installprefix!"\`
+installman1dir=`echo $installman1dir | sed "s!/share/share/!/share/!"`
+installman3dir=`echo $installman3dir | sed "s!/share/share/!/share/!"`
+installman1dir=\`echo \$installman1dir | sed "s!/usr/man/!/usr/share/man/!"\`
+installman3dir=\`echo \$installman3dir | sed "s!/usr/man/!/usr/share/man/!"\`
+man1ext=1
+man3ext=3pm
+installprivlib=\`echo \$installprivlib | sed "s!\$prefix!\$installprefix!"\`
+installscript=\`echo \$installscript | sed "s!\$prefix!\$installprefix!"\`
+installsitelib=\`echo \$installsitelib | sed "s!\$prefix!\$installprefix!"\`
+installsitearch=\`echo \$installsitearch | sed "s!\$prefix!\$installprefix!"\`
+EOF
+	sh Configure -des \
+		-Darchname=${CHOST%%-*}-linux \
+		-Dcc=gcc \
+		-Dprefix=/usr \
+		-Dlocincpth=' ' \
+		-Doptimize="${CFLAGS}" \
+		-Duselargefiles \
+		-Dd_dosuid \
+		-Dd_semctl_semun \
+		-Dusethreads \
+		--man1dir=${D}/usr/share/man/man1 \
+		--man1ext=1 \
+		--man3dir=${D}/usr/share/man/man3 \
+		--man3ext=3 \
+		${myconf} || die "Unable to configure"
+	emake || die "Unable to make"
+
+	export PARCH=`grep myarchname config.sh | cut -f2 -d"'"`
+
+	if [ `expr "$PARCH" ":" "sparc"` -gt 4 ]; then
+	  echo "Skipping tests on this platform"
+	else
+	  make test
+	fi
+							
+
+}
+
+src_install () {
+	
+	cd ${S}
+	
+	export PARCH=`grep myarchname config.sh | cut -f2 -d"'"`
+	
+	insinto /usr/lib/perl5/${PV}/${PARCH}-thread-multi/CORE/
+	doins ${WORKDIR}/libperl.so
+	dosym /usr/lib/perl5/${PV}/${PARCH}-thread-multi/CORE/libperl.so /usr/lib/libperl.so
+	#Fix for "stupid" modules and programs
+	dosym /usr/lib/perl5/${PV}/${PARCH}-thread-multi /usr/lib/perl5/${PV}/${PARCH}	
+	dodir /usr/lib/perl5/site_perl/${PV}/${PARCH}-thread-multi
+	dosym /usr/lib/perl5/site_perl/${PV}/${PARCH}-thread-multi /usr/lib/perl5/site_perl/${PV}/${PARCH}	
+
+	#This is to fix a missing c flag for backwards compat
+	make DESTDIR=${D} INSTALLMAN1DIR=${D}/usr/share/man/man1 INSTALLMAN3DIR=${D}/usr/share/man/man3 install || die "Unable to make install"
+
+	cp ${D}/usr/lib/perl5/${PV}/${PARCH}-thread-multi/Config.pm ${D}/usr/lib/perl5/${PV}/${PARCH}-thread-multi/Config.pm.bak
+	sed -e "s:ccflags=':ccflags='-DPERL5 :" ${D}/usr/lib/perl5/${PV}/${PARCH}-thread-multi/Config.pm.bak > ${D}/usr/lib/perl5/${PV}/${PARCH}-thread-multi/Config.pm
+	cp ${D}/usr/lib/perl5/${PV}/${PARCH}-thread-multi/Config.pm ${D}/usr/lib/perl5/${PV}/${PARCH}-thread-multi/Config.pm.bak
+	sed -e "s:cppflags=':cppflags='-DPERL5 :" ${D}/usr/lib/perl5/${PV}/${PARCH}-thread-multi/Config.pm.bak > ${D}/usr/lib/perl5/${PV}/${PARCH}-thread-multi/Config.pm
+	rm -f ${D}/usr/lib/perl5/${PV}/${PARCH}-thread-multi/Config.pm.bak
+
+	 ./perl installman --man1dir=${D}/usr/share/man/man1 --man1ext=1 --man3dir=${D}/usr/share/man/man3 --man3ext=3
+
+# This removes ${D} from Config.pm
+
+	dosed /usr/lib/perl5/${PV}/${CHOST%%-*}-linux-thread-multi/Config.pm
+	dosed /usr/lib/perl5/${PV}/${CHOST%%-*}-linux-thread-multi/.packlist
+	 
+
+	dodoc Changes* Artistic Copying README Todo* AUTHORS
+	prepalldocs
+
+# HTML Documentation
+# We expect errors, warnings, and such with the following. We do it twice per
+# the installation directions for 5.8
+
+	dodir /usr/share/doc/${PF}/html
+	./perl installhtml \
+	--podroot=.                 \
+	--podpath=lib:ext:pod:vms   \
+	--recurse \
+	--htmldir=${D}/usr/share/doc/${PF}/html \
+	--libpods=perlfunc:perlguts:perlvar:perlrun:perlop
+
+}
+