Removed older revisions.

(Portage version: 2.1.2-r5)

8 files changed, 6 insertions, 993 deletions

diff --git a/sys-fs/udev/ChangeLog b/sys-fs/udev/ChangeLog
index 004eb6a5c549..ec9d0bc8cdbb 100644
--- a/sys-fs/udev/ChangeLog
+++ b/sys-fs/udev/ChangeLog
@@ -1,6 +1,11 @@
 # ChangeLog for sys-fs/udev
 # Copyright 1999-2007 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/sys-fs/udev/ChangeLog,v 1.237 2007/01/30 09:56:02 zzam Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/udev/ChangeLog,v 1.238 2007/01/30 14:33:00 zzam Exp $
+
+  30 Jan 2007; Matthias Schwarzott <zzam@gentoo.org>
+  -files/05-udev-early.rules-104-r2, -files/udev.rules-104-r2,
+  -files/udev-start-104-r3.sh, -udev-104-r3.ebuild, -udev-104-r4.ebuild:
+  Removed older revisions.
 
   30 Jan 2007; Matthias Schwarzott <zzam@gentoo.org> udev-104-r3.ebuild,
   udev-104-r4.ebuild, udev-104-r5.ebuild:
diff --git a/sys-fs/udev/files/05-udev-early.rules-104-r2 b/sys-fs/udev/files/05-udev-early.rules-104-r2
deleted file mode 100644
index 74a842d03dce..000000000000
--- a/sys-fs/udev/files/05-udev-early.rules-104-r2
+++ /dev/null
@@ -1,9 +0,0 @@
-# ignore these events until someone needs them
-SUBSYSTEM=="drivers",	OPTIONS="ignore_device"
-SUBSYSTEM=="module",	OPTIONS="ignore_device"
-
-# sysfs is populated after the event is sent
-ACTION=="add", DEVPATH=="/devices/*", ENV{PHYSDEVBUS}=="?*", WAIT_FOR_SYSFS="bus"
-ACTION=="add", SUBSYSTEM=="scsi", WAIT_FOR_SYSFS="ioerr_cnt"
-ACTION=="add", SUBSYSTEM=="net", WAIT_FOR_SYSFS="address"
-ACTION=="add", SUBSYSTEM=="net", ENV{PHYSDEVDRIVER}=="?*", WAIT_FOR_SYSFS="device/driver"
diff --git a/sys-fs/udev/files/digest-udev-104-r3 b/sys-fs/udev/files/digest-udev-104-r3
deleted file mode 100644
index 1d88fbeee74a..000000000000
--- a/sys-fs/udev/files/digest-udev-104-r3
+++ /dev/null
@@ -1,3 +0,0 @@
-MD5 9bcfc782d40db2b406a9c1172defda8f udev-104.tar.bz2 187574
-RMD160 269aeb9a0b2043d18c274fde749d2e0d30398b73 udev-104.tar.bz2 187574
-SHA256 ec0e7bd0c322dce6149d5f94185aa477659f5030a3d684ff5428124eca684ea1 udev-104.tar.bz2 187574
diff --git a/sys-fs/udev/files/digest-udev-104-r4 b/sys-fs/udev/files/digest-udev-104-r4
deleted file mode 100644
index 1d88fbeee74a..000000000000
--- a/sys-fs/udev/files/digest-udev-104-r4
+++ /dev/null
@@ -1,3 +0,0 @@
-MD5 9bcfc782d40db2b406a9c1172defda8f udev-104.tar.bz2 187574
-RMD160 269aeb9a0b2043d18c274fde749d2e0d30398b73 udev-104.tar.bz2 187574
-SHA256 ec0e7bd0c322dce6149d5f94185aa477659f5030a3d684ff5428124eca684ea1 udev-104.tar.bz2 187574
diff --git a/sys-fs/udev/files/udev-start-104-r3.sh b/sys-fs/udev/files/udev-start-104-r3.sh
deleted file mode 100644
index a976d66daa6e..000000000000
--- a/sys-fs/udev/files/udev-start-104-r3.sh
+++ /dev/null
@@ -1,133 +0,0 @@
-# Copyright 1999-2005 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-udev_version() {
-	# Version number copied in by ebuild
-	local version=@@UDEV_VERSION@@
-	version=${version##0}
-
-	echo "${version}"
-}
-
-populate_udev() {
-	# populate /dev with devices already found by the kernel
-	if [ $(get_KV) -gt "$(KV_to_int '2.6.14')" ] ; then
-		ebegin "Populating /dev with existing devices through uevents"
-		local opts=
-		[[ ${RC_COLDPLUG} != "yes" && $(udev_version) -ge "96" ]] && \
-			opts="--attr-match=dev"
-		 /sbin/udevtrigger ${opts}
-		eend $?
-	else
-		ebegin "Populating /dev with existing devices with udevstart"
-		/sbin/udevstart
-		eend $?
-	fi
-
-	# loop until everything is finished
-	# there's gotta be a better way...
-	ebegin "Letting udev process events"
-	/sbin/udevsettle --timeout=60
-	eend $?
-
-	return 0
-}
-
-seed_dev() {
-	# Seed /dev with some things that we know we need
-	ebegin "Seeding /dev with needed nodes"
-
-	# copy over any persistant things
-	if [[ -d /lib/udev/devices ]] ; then
-		cp --preserve=all --recursive --update /lib/udev/devices/* /dev 2>/dev/null
-	fi
-
-	# Not provided by sysfs but needed
-	ln -snf /proc/self/fd /dev/fd
-	ln -snf fd/0 /dev/stdin
-	ln -snf fd/1 /dev/stdout
-	ln -snf fd/2 /dev/stderr
-	[[ -e /proc/kcore ]] && ln -snf /proc/kcore /dev/core
-
-	# Create problematic directories
-	mkdir -p /dev/{pts,shm}
-	eend 0
-}
-
-main() {
-	# Setup temporary storage for /dev
-	ebegin "Mounting /dev for udev"
-	if [[ ${RC_USE_FSTAB} == "yes" ]] ; then
-		mntcmd=$(get_mount_fstab /dev)
-	else
-		unset mntcmd
-	fi
-	if [[ -n ${mntcmd} ]] ; then
-		try mount -n ${mntcmd}
-	else
-		# This is bash only, but saves on using grep
-		if [[ $(</proc/filesystems)$'\n' =~ [[:space:]]tmpfs$'\n' ]] ; then
-			mntcmd="tmpfs"
-		else
-			mntcmd="ramfs"
-		fi
-		# many video drivers require exec access in /dev #92921
-		try mount -n -t ${mntcmd} udev /dev -o exec,nosuid,mode=0755
-	fi
-	eend $?
-
-	# Create a file so that our rc system knows it's still in sysinit.
-	# Existance means init scripts will not directly run.
-	# rc will remove the file when done with sysinit.
-	touch /dev/.rcsysinit
-
-	# Selinux lovin; /selinux should be mounted by selinux-patched init
-	if [[ -x /sbin/restorecon && -c /selinux/null ]] ; then
-		restorecon /dev &> /selinux/null
-	fi
-
-	# Actually get udev rolling
-	if [[ ${RC_DEVICE_TARBALL} == "yes" && \
-	      -s /lib/udev/state/devices.tar.bz2 ]] ; then
-		ebegin "Populating /dev with saved device nodes"
-		try tar -jxpf /lib/udev/state/devices.tar.bz2 -C /dev
-		eend $?
-	fi
-
-	seed_dev
-
-	# Setup hotplugging (if possible)
-	if [[ -e /proc/sys/kernel/hotplug ]] ; then
-		ebegin "Setting up proper hotplug agent"
-		eindent
-		if [[ $(get_KV) -gt $(KV_to_int '2.6.14') ]] ; then
-			einfo "Using netlink for hotplug events..."
-			echo "" > /proc/sys/kernel/hotplug
-		else
-			einfo "Setting /sbin/udevsend as hotplug agent ..."
-			echo "/sbin/udevsend" > /proc/sys/kernel/hotplug
-		fi
-		eoutdent
-		eend 0
-	fi
-
-	ebegin "Starting udevd"
-	/sbin/udevd --daemon
-	eend $?
-
-	populate_udev
-
-	# Create nodes that udev can't
-	ebegin "Finalizing udev configuration"
-	[[ -x /sbin/dmsetup ]] && /sbin/dmsetup mknodes &>/dev/null
-	[[ -x /sbin/lvm ]] && \
-		/sbin/lvm vgscan -P --mknodes --ignorelockingfailure &>/dev/null
-	# Running evms_activate on a LiveCD causes lots of headaches
-	[[ -z ${CDBOOT} ]] && [[ -x /sbin/evms_activate ]] && \
-		/sbin/evms_activate -q &>/dev/null
-	eend 0
-}
-
-main
-
-# vim:ts=4
diff --git a/sys-fs/udev/files/udev.rules-104-r2 b/sys-fs/udev/files/udev.rules-104-r2
deleted file mode 100644
index 5198c80eb539..000000000000
--- a/sys-fs/udev/files/udev.rules-104-r2
+++ /dev/null
@@ -1,302 +0,0 @@
-# /etc/udev/rules/50-udev.rules:  device naming rules for udev
-#
-# Gentoo specific rules
-#
-# There are a number of modifiers that are allowed to be used in some of the
-# fields.  See the udev man page for a full description of them.
-#
-# Try not to modify this file, if you wish to change things, create a new rule
-# file that can be run before this one.
-#
-
-
-# console
-KERNEL=="pty[pqrstuvwxyzabcdef][0123456789abcdef]", NAME="%k", GROUP="tty",	OPTIONS="last_rule"
-KERNEL=="tty[pqrstuvwxyzabcdef][0123456789abcdef]", NAME="%k", GROUP="tty",	OPTIONS="last_rule"
-KERNEL=="vcs*",                 NAME="%k", GROUP="tty",			OPTIONS="last_rule"
-KERNEL=="vcsa*",                NAME="%k", GROUP="tty",			OPTIONS="last_rule"
-KERNEL=="tty",                  NAME="%k", GROUP="tty", MODE="0666",	OPTIONS="last_rule"
-KERNEL=="tty[0-9]",             NAME="%k", GROUP="tty",			OPTIONS="last_rule"
-KERNEL=="tty[0-9][0-9]",        NAME="%k", GROUP="tty",			OPTIONS="last_rule"
-KERNEL=="console",		NAME="%k", GROUP="tty", MODE="0600"
-KERNEL=="ptmx",			NAME="%k", GROUP="tty", MODE="0666"
-
-# tty devices
-KERNEL=="ttyS[0-9]*",	NAME="%k", SYMLINK="tts/%n", GROUP="tty"
-KERNEL=="ttyUSB[0-9]*",	NAME="%k", SYMLINK="tts/USB%n", GROUP="tty", MODE="0660"
-KERNEL=="ippp0",	NAME="%k", GROUP="tty"
-KERNEL=="isdn*"		NAME="%k", GROUP="tty"
-KERNEL=="dcbri*",	NAME="%k", GROUP="tty"
-KERNEL=="ircomm*",	NAME="%k", GROUP="tty"
-
-# all block devices
-SUBSYSTEM=="block", GROUP="disk"
-
-# cdrom symlinks and other good cdrom naming
-KERNEL=="sr[0-9]*|hd[a-z]|pcd[0-9]*", ACTION=="add", IMPORT{program}="cdrom_id --export $tempnode"
-
-ENV{ID_CDROM}=="?*", GROUP="cdrom"
-BUS=="scsi",	KERNEL=="sg[0-9]*", ACTION=="add", DRIVERS=="sr", GROUP="cdrom"
-
-# disk devices
-KERNEL=="sd*",		NAME="%k", GROUP="disk"
-KERNEL=="dasd*",	NAME="%k", GROUP="disk"
-KERNEL=="ataraid*",	NAME="%k", GROUP="disk"
-
-# compaq smart array
-KERNEL=="cciss*",	NAME="%k"
-KERNEL=="ida*",		NAME="%k"
-
-# mylex
-KERNEL=="rd*",		NAME="%k"
-
-# dri devices
-KERNEL=="card*",	NAME="dri/card%n", GROUP="video"
-KERNEL=="nvidia*",	NAME="%k", GROUP="video"
-KERNEL=="3dfx*",	NAME="%k", GROUP="video"
-
-# alsa devices
-SUBSYSTEM=="sound", GROUP="audio"
-KERNEL=="controlC[0-9]*",	NAME="snd/%k"
-KERNEL=="hw[CD0-9]*",		NAME="snd/%k"
-KERNEL=="pcm[CD0-9cp]*",	NAME="snd/%k"
-KERNEL=="midiC[D0-9]*",		NAME="snd/%k"
-KERNEL=="timer",		NAME="snd/%k"
-KERNEL=="seq",			NAME="snd/%k"
-
-# capi devices
-KERNEL=="capi",		NAME="capi20", SYMLINK+="isdn/capi20", GROUP="dialout"
-KERNEL=="capi*",	NAME="capi/%n", GROUP="dialout"
-
-# cpu devices
-KERNEL=="cpu[0-9]*",	NAME="cpu/%n/cpuid"
-KERNEL=="msr[0-9]*",	NAME="cpu/%n/msr"
-KERNEL=="microcode",	NAME="cpu/microcode"
-
-# dm devices (ignore them)
-KERNEL=="dm-[0-9]*",	OPTIONS="ignore_device"
-# create a symlink named after the device map name
-# note devmap_name comes with extras/multipath
-#KERNEL=="dm-[0-9]*",	PROGRAM="/sbin/devmap_name %M %m", NAME="%k", SYMLINK+="%c"
-KERNEL=="device-mapper",	NAME="mapper/control"
-
-# fb devices
-KERNEL=="fb[0-9]*",	NAME="fb/%n", SYMLINK+="%k", GROUP="video"
-
-# floppy devices
-KERNEL=="fd[0-9]*",	NAME="floppy/%n", SYMLINK+="%k", GROUP="floppy"
-
-# i2c devices
-KERNEL=="i2c-[0-9]*",	NAME="i2c/%n", SYMLINK+="%k"
-
-# input devices
-KERNEL=="mice",		NAME="input/%k", MODE="0644"
-KERNEL=="mouse*",	NAME="input/%k", MODE="0644"
-KERNEL=="event*",	NAME="input/%k", MODE="0600"
-KERNEL=="js*",		NAME="input/%k", MODE="664"
-KERNEL=="ts*",		NAME="input/%k", MODE="0600"
-
-# loop devices
-KERNEL=="loop[0-9]*",	NAME="loop/%n", SYMLINK+="%k", GROUP="disk"
-
-# md block devices
-KERNEL=="md[0-9]*",	NAME="md/%n", SYMLINK+="%k", GROUP="disk"
-
-# aoe char devices,
-SUBSYSTEM=="aoe", KERNEL=="discover",	NAME="etherd/%k", GROUP="disk", MODE="0220"
-SUBSYSTEM=="aoe", KERNEL=="err",	NAME="etherd/%k", GROUP="disk", MODE="0440"
-SUBSYSTEM=="aoe", KERNEL=="interfaces",	NAME="etherd/%k", GROUP="disk", MODE="0220"
-
-# misc devices
-KERNEL=="agpgart",	NAME="misc/%k", SYMLINK+="%k"
-KERNEL=="psaux",	NAME="misc/%k", SYMLINK+="%k"
-KERNEL=="rtc",		NAME="misc/%k", SYMLINK+="%k", MODE="0664"
-KERNEL=="uinput",	NAME="misc/%k", SYMLINK+="%k"
-KERNEL=="inotify",	NAME="misc/%k", SYMLINK+="%k", MODE="0666"
-
-# netlink devices
-KERNEL=="route",	NAME="netlink/%k"
-KERNEL=="skip",		NAME="netlink/%k"
-KERNEL=="usersock",	NAME="netlink/%k"
-KERNEL=="fwmonitor",	NAME="netlink/%k"
-KERNEL=="tcpdiag",	NAME="netlink/%k"
-KERNEL=="nflog",	NAME="netlink/%k"
-KERNEL=="xfrm",		NAME="netlink/%k"
-KERNEL=="arpd",		NAME="netlink/%k"
-KERNEL=="route6",	NAME="netlink/%k"
-KERNEL=="ip6_fw",	NAME="netlink/%k"
-KERNEL=="dnrtmsg",	NAME="netlink/%k"
-KERNEL=="tap*",		NAME="netlink/%k"
-
-# network devices
-KERNEL=="tun",		NAME="net/%k",	MODE="0600"
-
-# ramdisk devices
-KERNEL=="ram[0-9]*",	NAME="rd/%n", SYMLINK+="%k"
-
-# IEEE1394 (firewire) devices (must be before raw devices below)
-KERNEL=="raw1394",	NAME="%k",		GROUP="video"
-KERNEL=="dv1394*",	NAME="dv1394/%n",	GROUP="video"
-KERNEL=="video1394*",	NAME="video1394/%n",	GROUP="video"
-
-# raw devices
-KERNEL=="raw[0-9]*",	NAME="raw/%k", GROUP="disk"
-KERNEL=="ram*",		NAME="%k", GROUP="disk"
-
-# sound devices
-KERNEL=="adsp",			NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
-KERNEL=="adsp[0-9]*",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
-KERNEL=="audio",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
-KERNEL=="audio[0-9]*",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
-KERNEL=="dsp",			NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
-KERNEL=="dsp[0-9]*",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
-KERNEL=="mixer",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
-KERNEL=="mixer[0-9]*",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
-KERNEL=="sequencer",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
-KERNEL=="sequencer[0-9]*",	NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
-
-# memory devices
-KERNEL=="random",	NAME="%k", MODE="0666"
-KERNEL=="urandom",	NAME="%k", MODE="0444"
-KERNEL=="mem",		NAME="%k", MODE="0640"
-KERNEL=="kmem",		NAME="%k", MODE="0640"
-KERNEL=="port",		NAME="%k", MODE="0640"
-KERNEL=="full",		NAME="%k", MODE="0666"
-KERNEL=="null",		NAME="%k", MODE="0666"
-KERNEL=="zero",		NAME="%k", MODE="0666"
-
-# usb devices
-KERNEL=="hiddev*",		NAME="usb/%k"
-KERNEL=="auer*",		NAME="usb/%k"
-KERNEL=="legousbtower*",	NAME="usb/%k", GROUP="usb"
-KERNEL=="dabusb*",		NAME="usb/%k"
-BUS=="usb", KERNEL=="lp[0-9]*",	NAME="usb/%k", GROUP="lp"
-
-# v4l devices
-KERNEL=="video[0-9]*",	NAME="v4l/video%n", SYMLINK+="video%n", GROUP="video"
-KERNEL=="radio[0-9]*",	NAME="v4l/radio%n", SYMLINK+="radio%n", GROUP="video"
-KERNEL=="vbi[0-9]*",	NAME="v4l/vbi%n", SYMLINK+="vbi%n", GROUP="video"
-KERNEL=="vtx[0-9]*",	NAME="v4l/vtx%n", GROUP="video"
-
-# dvb devices
-SUBSYSTEM=="dvb", PROGRAM="/bin/sh -c 'K=%k; K=$${K#dvb}; printf dvb/adapter%%i/%%s $${K%%%%.*} $${K#*.}'", NAME="%c", GROUP="video"
-
-# Asterisk Zaptel devices
-KERNEL=="zapctl",	NAME="zap/ctl"
-KERNEL=="zaptimer",	NAME="zap/timer"
-KERNEL=="zapchannel",	NAME="zap/channel"
-KERNEL=="zappseudo",	NAME="zap/pseudo"
-KERNEL=="zap[0-9]*",	NAME="zap/%n"
-
-# pilot/palm devices
-KERNEL=="pilot",	NAME="%k", GROUP="uucp"
-
-# jaz devices
-KERNEL=="jaz*",		NAME="%k", GROUP="disk"
-
-# zip devices
-KERNEL=="pocketzip*",	NAME="%k", GROUP="disk"
-KERNEL=="zip*",		NAME="%k", GROUP="disk"
-
-# ls120 devices
-KERNEL=="ls120",	NAME="%k", GROUP="disk"
-
-# lp devices
-KERNEL=="lp*",		NAME="%k", GROUP="lp"
-KERNEL=="irlpt",	NAME="%k", GROUP="lp"
-KERNEL=="usblp",	NAME="%k", GROUP="lp"
-KERNEL=="lp*",		NAME="%k", GROUP="lp"
-KERNEL=="parport*",	NAME="%k", GROUP="lp"
-
-# tape devices
-KERNEL=="ht*",		NAME="%k", GROUP="tape"
-KERNEL=="nht*",		NAME="%k", GROUP="tape"
-KERNEL=="pt*",		NAME="%k", GROUP="tape"
-KERNEL=="npt*",		NAME="%k", GROUP="tape"
-KERNEL=="st*",		NAME="%k", GROUP="tape"
-KERNEL=="nst*",		NAME="%k", GROUP="tape"
-KERNEL=="osst*",	NAME="%k", GROUP="tape"
-KERNEL=="nosst*",	NAME="%k", GROUP="tape"
-
-# diskonkey devices
-KERNEL=="diskonkey*",	NAME="%k", GROUP="disk"
-
-# rem_ide devices
-KERNEL=="microdrive*",	NAME="%k", GROUP="disk"
-
-# kbd devices
-KERNEL=="kbd",		NAME="%k", MODE="0664"
-
-# Sony Vaio Jogdial sonypi device
-KERNEL=="sonypi",	NAME="%k", MODE="0666"
-
-# packet devices
-KERNEL=="pktcdvd",		NAME="pktcdvd/control", GROUP="cdrw", MODE="0660"
-KERNEL=="pktcdvd[0-9]*",	NAME="pktcdvd/pktcdvd%n", GROUP="cdrw", MODE="0660"
-
-# infiniband devices
-KERNEL=="umad*",	NAME="infiniband/%k"
-KERNEL=="issm*",	NAME="infiniband/%k"
-
-
-# usbfs-like device nodes
-SUBSYSTEM=="usb_device", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", NAME="%c", GROUP="usb", MODE="0664"
-
-
-# Module autoloading
-
-# Autoload modules that lack aliases but have them defined inutoload modules
-ENV{MODALIAS}=="?*", ACTION=="add", RUN+="/sbin/modprobe $env{MODALIAS}"
-
-# /etc/modprobe.conf.
-SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", RUN+="/bin/sh -c 'while read id; do /sbin/modprobe pnp:d$$id; done < /sys$devpath/id'"
-# If you have problems with some pnp modules being loaded, please enter the
-# following aliases into the modprobe configuration files.  These are needed by
-# udev to autoload some modules
-# alias pnp:dPNP0510 irtty-sir
-# alias pnp:dPNP0511 irtty-sir
-# alias pnp:dPNP0700 floppy
-# alias pnp:dPNP0800 pcspkr
-# alias pnp:dPNP0b00 rtc
-# alias pnp:dPNP0303 atkbd
-# alias pnp:dPNP0f13 psmouse
-# alias pnp:dPNPb02f analog
-
-
-# Parts taken from redhat-rules
-# sd:           0 TYPE_DISK, 7 TYPE_MOD, 14 TYPE_RBC
-# sr:           4 TYPE_WORM, 5 TYPE_ROM
-# st/osst:      1 TYPE_TAPE
-
-# Setting timeout for tape-devices to 900 seconds
-# if you need timeouts for other devices add a similar rule
-# with correct type-value, or open a bug on bugs.gentoo.org.
-ACTION=="add", SUBSYSTEM=="scsi" , ATTRS{type}=="1", \
-	RUN+="/bin/sh -c 'echo 900 > /sys$$DEVPATH/timeout'"
-
-# Load driver scsi-device
-ACTION=="add", SUBSYSTEM=="scsi_device", RUN+="/sbin/modprobe sg"
-ACTION=="add", SUBSYSTEM=="scsi_device", ATTRS{type}=="0|7|14", \
-	RUN+="/sbin/modprobe sd_mod"
-ACTION=="add", SUBSYSTEM=="scsi_device", ATTRS{type}=="4|5", \
-	RUN+="/sbin/modprobe sr_mod"
-
-ACTION=="add", SUBSYSTEM=="scsi_device", ATTRS{type}=="1", ENV{ID_SCSI_TAPE_DRIVER}="st"
-ACTION=="add", SUBSYSTEM=="scsi_device", ATTRS{type}=="1", ATTRS{vendor}=="On[sS]tream", \
-	ATTRS{model}!="ADR*", ENV{ID_SCSI_TAPE_DRIVER}="osst"
-ENV{ID_SCSI_TAPE_DRIVER}=="?*", RUN+="/sbin/modprobe $env{ID_SCSI_TAPE_DRIVER}"
-
-
-# Load firmware
-SUBSYSTEM=="firmware", ACTION=="add", RUN+="firmware.sh"
-
-
-# be backward compatible for a while with the /etc/dev.d and /etc/hotplug.d/ systems
-# run /etc/hotplug.d/ stuff only if we came from a hotplug event, not for udevstart
-#ENV{UDEVD_EVENT}=="1", RUN+="udev_run_hotplugd $env{SUBSYSTEM}"
-
-# always run /etc/dev.d/ stuff for now.
-RUN+="udev_run_devd $env{SUBSYSTEM}"
-
-# debugging monitor
-RUN+="socket:/org/kernel/udev/monitor"
diff --git a/sys-fs/udev/udev-104-r3.ebuild b/sys-fs/udev/udev-104-r3.ebuild
deleted file mode 100644
index e877ca696310..000000000000
--- a/sys-fs/udev/udev-104-r3.ebuild
+++ /dev/null
@@ -1,271 +0,0 @@
-# Copyright 1999-2007 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-fs/udev/udev-104-r3.ebuild,v 1.5 2007/01/30 09:56:02 zzam Exp $
-
-inherit eutils flag-o-matic multilib toolchain-funcs
-
-DESCRIPTION="Linux dynamic and persistent device naming support (aka userspace devfs)"
-HOMEPAGE="http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html"
-SRC_URI="mirror://kernel/linux/utils/kernel/hotplug/${P}.tar.bz2"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86"
-IUSE="selinux"
-
-DEPEND="selinux? ( sys-libs/libselinux )"
-RDEPEND="!sys-apps/coldplug"
-RDEPEND="${DEPEND} ${RDEPEND}
-	>=sys-apps/baselayout-1.11.14"
-# We need the lib/rcscripts/addon support
-PROVIDE="virtual/dev-manager"
-
-src_unpack() {
-	unpack ${A}
-
-	cd "${S}"
-
-	# patches go here...
-	#epatch ${FILESDIR}/${P}-udev_volume_id.patch
-	epatch ${FILESDIR}/${P}-netif-rename-busywait.patch
-
-	# No need to clutter the logs ...
-	sed -ie '/^DEBUG/ c\DEBUG = false' Makefile
-	# Do not use optimization flags from the package
-	sed -ie 's|$(OPTIMIZATION)||g' Makefile
-
-	# Make sure there is no sudden changes to udev.rules.gentoo
-	# (more for my own needs than anything else ...)
-	MD5=`md5sum < "${S}/etc/udev/gentoo/udev.rules"`
-	MD5=${MD5/  -/}
-	if [ "${MD5}" != "295a9b7bdc8bdb239f8860d14af761b0" ]
-	then
-		echo
-		eerror "gentoo/udev.rules has been updated, please validate!"
-		die "gentoo/udev.rules has been updated, please validate!"
-	fi
-}
-
-src_compile() {
-	filter-flags -fprefetch-loop-arrays
-	local myconf=
-	local extras="extras/ata_id \
-				  extras/cdrom_id \
-				  extras/dasd_id \
-				  extras/edd_id \
-				  extras/firmware \
-				  extras/floppy \
-				  extras/path_id \
-				  extras/run_directory \
-				  extras/scsi_id \
-				  extras/usb_id \
-				  extras/volume_id \
-				  extras/rule_generator"
-
-	use selinux && myconf="${myconf} USE_SELINUX=true"
-
-	# Not everyone has full $CHOST-{ld,ar,etc...} yet
-	local mycross=""
-	type -p ${CHOST}-ar && mycross=${CHOST}-
-
-	echo "get_libdir = $(get_libdir)"
-	# Do not work with emake
-	make \
-		EXTRAS="${extras}" \
-		udevdir="/dev/" \
-		CROSS_COMPILE=${mycross} \
-		${myconf} || die
-}
-
-src_install() {
-	# we install everything by "hand" and don't rely on the udev Makefile to do
-	# it for us (why? it's easier that way...)
-	dobin udevinfo		|| die "Required binary not installed properly"
-	dobin udevtest		|| die "Required binary not installed properly"
-	dobin udevmonitor	|| die "Required binary not installed properly"
-	into /
-	dosbin udevd		|| die "Required binary not installed properly"
-	dosbin udevstart	|| die "Required binary not installed properly"
-	dosbin udevtrigger	|| die "Required binary not installed properly"
-	dosbin udevcontrol	|| die "Required binary not installed properly"
-	dosbin udevsettle	|| die "Required binary not installed properly"
-
-	# Helpers
-	exeinto /lib/udev
-	doexe extras/run_directory/udev_run_devd	|| die "Required helper not installed properly"
-	doexe extras/run_directory/udev_run_hotplugd	|| die "Required helper not installed properly"
-	doexe extras/ata_id/ata_id		|| die "Required helper not installed properly"
-	doexe extras/volume_id/vol_id	|| die "Required helper not installed properly"
-	doexe extras/scsi_id/scsi_id	|| die "Required helper not installed properly"
-	doexe extras/usb_id/usb_id		|| die "Required helper not installed properly"
-	doexe extras/path_id/path_id	|| die "Required helper not installed properly"
-	doexe extras/cdrom_id/cdrom_id	|| die "Required helper not installed properly"
-	doexe extras/dasd_id/dasd_id	|| die "Required helper not installed properly"
-	doexe extras/edd_id/edd_id		|| die "Required helper not installed properly"
-	doexe extras/rule_generator/write_cd_rules	|| die "Required helper not installed properly"
-	doexe extras/rule_generator/write_net_rules	|| die "Required helper not installed properly"
-	doexe extras/rule_generator/rule_generator.functions	|| die "Required helper not installed properly"
-	keepdir /lib/udev/state
-	keepdir /lib/udev/devices
-
-	# vol_id library (needed by mount and HAL)
-	dolib extras/volume_id/lib/*.a extras/volume_id/lib/*.so*
-	# move the .a files to /usr/lib
-	dodir /usr/$(get_libdir)
-	mv -f "${D}"/$(get_libdir)/*.a  "${D}"/usr/$(get_libdir)/
-
-	# handle static linking bug #4411
-	gen_usr_ldscript libvolume_id.so
-
-	# save pkgconfig info
-	insinto /usr/$(get_libdir)/pkgconfig
-	doins extras/volume_id/lib/*.pc
-
-	#exeinto /etc/udev/scripts
-	exeinto /lib/udev
-	#doexe extras/ide-devfs.sh
-	#doexe extras/scsi-devfs.sh
-	#doexe extras/raid-devfs.sh
-	doexe extras/floppy/create_floppy_devices	|| die "Required binary not installed properly"
-	doexe extras/firmware/firmware.sh			|| die "Required binary not installed properly"
-	doexe ${FILESDIR}/net.sh					|| die "Required binary not installed properly"
-	doexe ${FILESDIR}/seq_node.sh				|| die "Required binary not installed properly"
-
-	# Our udev config file
-	insinto /etc/udev
-	newins ${FILESDIR}/udev.conf.post_081 udev.conf
-
-	# Our rules files
-	insinto /etc/udev/rules.d/
-	newins etc/udev/gentoo/udev.rules 50-udev.rules
-	newins ${FILESDIR}/udev.rules-104-r2 50-udev.rules
-	newins ${FILESDIR}/05-udev-early.rules-104-r2 05-udev-early.rules
-	doins ${FILESDIR}/95-net.rules
-	# Use upstream's persistent rules for devices
-	doins etc/udev/rules.d/60-*.rules
-	doins extras/rule_generator/75-*.rules || die "rules not installed properly"
-
-	# scsi_id configuration
-	insinto /etc
-	doins extras/scsi_id/scsi_id.config
-
-	# set up the /etc/dev.d directory tree
-	dodir /etc/dev.d/default
-	dodir /etc/dev.d/net
-	exeinto /etc/dev.d/net
-	doexe extras/run_directory/dev.d/net/hotplug.dev
-
-	# all of the man pages
-	doman *.7
-	doman *.8
-	doman extras/ata_id/ata_id.8
-	doman extras/edd_id/edd_id.8
-	doman extras/scsi_id/scsi_id.8
-	doman extras/volume_id/vol_id.8
-	doman extras/dasd_id/dasd_id.8
-	doman extras/cdrom_id/cdrom_id.8
-	# create a extra symlink for udevcontrol
-	dosym udevd.8 /usr/share/man/man8/udevcontrol.8
-
-	# our udev hooks into the rc system
-	insinto /lib/rcscripts/addons
-	newins "${FILESDIR}"/udev-start-104-r3.sh udev-start.sh
-	newins "${FILESDIR}"/udev-stop-104-r3.sh udev-stop.sh
-
-	# Insert udev-version number into udev-rcscript addon
-	sed -e "s/@@UDEV_VERSION@@/${PV}/" \
-		-i "${D}"/lib/rcscripts/addons/udev-start.sh \
-		-i "${D}"/lib/rcscripts/addons/udev-stop.sh
-
-	# needed to compile latest Hal
-	insinto /usr/include
-	doins extras/volume_id/lib/libvolume_id.h
-
-	dodoc ChangeLog FAQ README TODO RELEASE-NOTES
-	dodoc docs/{overview,udev_vs_devfs}
-	dodoc docs/writing_udev_rules/*
-
-	newdoc extras/volume_id/README README_volume_id
-
-}
-
-pkg_preinst() {
-	if [[ -d ${ROOT}/lib/udev-state ]] ; then
-		mv -f "${ROOT}"/lib/udev-state/* "${D}"/lib/udev/state/
-		rm -r "${ROOT}"/lib/udev-state
-	fi
-
-	if [ -f "${ROOT}/etc/udev/udev.config" -a \
-	     ! -f "${ROOT}/etc/udev/udev.rules" ]
-	then
-		mv -f ${ROOT}/etc/udev/udev.config ${ROOT}/etc/udev/udev.rules
-	fi
-
-	# delete the old udev.hotplug symlink if it is present
-	if [ -h "${ROOT}/etc/hotplug.d/default/udev.hotplug" ]
-	then
-		rm -f ${ROOT}/etc/hotplug.d/default/udev.hotplug
-	fi
-
-	# delete the old wait_for_sysfs.hotplug symlink if it is present
-	if [ -h "${ROOT}/etc/hotplug.d/default/05-wait_for_sysfs.hotplug" ]
-	then
-		rm -f ${ROOT}/etc/hotplug.d/default/05-wait_for_sysfs.hotplug
-	fi
-
-	# delete the old wait_for_sysfs.hotplug symlink if it is present
-	if [ -h "${ROOT}/etc/hotplug.d/default/10-udev.hotplug" ]
-	then
-		rm -f ${ROOT}/etc/hotplug.d/default/10-udev.hotplug
-	fi
-
-	# is there a stale coldplug initscript? (CONFIG_PROTECT leaves it behind)
-	coldplug_stale=""
-	if [ -f "${ROOT}/etc/init.d/coldplug" ]
-	then
-		coldplug_stale="1"
-	fi
-}
-
-pkg_postinst() {
-	if [[ ${ROOT} == "/" ]] ; then
-		if [[ -n $(pidof udevd) ]] ; then
-			killall -15 udevd &>/dev/null
-			sleep 1
-			killall -9 udevd &>/dev/null
-		fi
-		/sbin/udevd --daemon
-	fi
-
-	# people want reminders, I'll give them reminders.  Odds are they will
-	# just ignore them anyway...
-
-	if [[ ${coldplug_stale} == "1" ]] ; then
-		ewarn "A stale coldplug init script found. You should run:"
-		ewarn
-		ewarn "      rc-update del coldplug"
-		ewarn "      rm -f /etc/init.d/coldplug"
-		ewarn
-		ewarn "udev now provides its own coldplug functionality."
-	fi
-
-	# delete 40-scsi-hotplug.rules - all integrated in 50-udev.rules
-	if has_version "=sys-fs/udev-103-r3"; then
-		if [[ -e "${ROOT}/etc/udev/rules.d/40-scsi-hotplug.rules" ]]
-		then
-			ewarn "Deleting stray 40-scsi-hotplug.rules"
-			ewarn "installed by sys-fs/udev-103-r3"
-			rm -f ${ROOT}/etc/udev/rules.d/40-scsi-hotplug.rules
-		fi
-	fi
-
-	# Removing some device-nodes we thought we need some time ago
-	if [[ -d "${ROOT}"/lib/udev/devices ]]; then
-		rm -f "${ROOT}"/lib/udev/devices/{null,zero,console,urandom}
-	fi
-
-	einfo
-	einfo "For more information on udev on Gentoo, writing udev rules, and"
-	einfo "         fixing known issues visit:"
-	einfo "         http://www.gentoo.org/doc/en/udev-guide.xml"
-}
diff --git a/sys-fs/udev/udev-104-r4.ebuild b/sys-fs/udev/udev-104-r4.ebuild
deleted file mode 100644
index a205e9bd6d3d..000000000000
--- a/sys-fs/udev/udev-104-r4.ebuild
+++ /dev/null
@@ -1,271 +0,0 @@
-# Copyright 1999-2007 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-fs/udev/udev-104-r4.ebuild,v 1.3 2007/01/30 09:56:02 zzam Exp $
-
-inherit eutils flag-o-matic multilib toolchain-funcs
-
-DESCRIPTION="Linux dynamic and persistent device naming support (aka userspace devfs)"
-HOMEPAGE="http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html"
-SRC_URI="mirror://kernel/linux/utils/kernel/hotplug/${P}.tar.bz2"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86"
-IUSE="selinux"
-
-DEPEND="selinux? ( sys-libs/libselinux )"
-RDEPEND="!sys-apps/coldplug"
-RDEPEND="${DEPEND} ${RDEPEND}
-	>=sys-apps/baselayout-1.11.14"
-# We need the lib/rcscripts/addon support
-PROVIDE="virtual/dev-manager"
-
-src_unpack() {
-	unpack ${A}
-
-	cd "${S}"
-
-	# patches go here...
-	#epatch ${FILESDIR}/${P}-udev_volume_id.patch
-	epatch ${FILESDIR}/${P}-netif-rename-busywait.patch
-
-	# No need to clutter the logs ...
-	sed -ie '/^DEBUG/ c\DEBUG = false' Makefile
-	# Do not use optimization flags from the package
-	sed -ie 's|$(OPTIMIZATION)||g' Makefile
-
-	# Make sure there is no sudden changes to udev.rules.gentoo
-	# (more for my own needs than anything else ...)
-	MD5=`md5sum < "${S}/etc/udev/gentoo/udev.rules"`
-	MD5=${MD5/  -/}
-	if [ "${MD5}" != "295a9b7bdc8bdb239f8860d14af761b0" ]
-	then
-		echo
-		eerror "gentoo/udev.rules has been updated, please validate!"
-		die "gentoo/udev.rules has been updated, please validate!"
-	fi
-}
-
-src_compile() {
-	filter-flags -fprefetch-loop-arrays
-	local myconf=
-	local extras="extras/ata_id \
-				  extras/cdrom_id \
-				  extras/dasd_id \
-				  extras/edd_id \
-				  extras/firmware \
-				  extras/floppy \
-				  extras/path_id \
-				  extras/run_directory \
-				  extras/scsi_id \
-				  extras/usb_id \
-				  extras/volume_id \
-				  extras/rule_generator"
-
-	use selinux && myconf="${myconf} USE_SELINUX=true"
-
-	# Not everyone has full $CHOST-{ld,ar,etc...} yet
-	local mycross=""
-	type -p ${CHOST}-ar && mycross=${CHOST}-
-
-	echo "get_libdir = $(get_libdir)"
-	# Do not work with emake
-	make \
-		EXTRAS="${extras}" \
-		udevdir="/dev/" \
-		CROSS_COMPILE=${mycross} \
-		${myconf} || die
-}
-
-src_install() {
-	# we install everything by "hand" and don't rely on the udev Makefile to do
-	# it for us (why? it's easier that way...)
-	dobin udevinfo		|| die "Required binary not installed properly"
-	dobin udevtest		|| die "Required binary not installed properly"
-	dobin udevmonitor	|| die "Required binary not installed properly"
-	into /
-	dosbin udevd		|| die "Required binary not installed properly"
-	dosbin udevstart	|| die "Required binary not installed properly"
-	dosbin udevtrigger	|| die "Required binary not installed properly"
-	dosbin udevcontrol	|| die "Required binary not installed properly"
-	dosbin udevsettle	|| die "Required binary not installed properly"
-
-	# Helpers
-	exeinto /lib/udev
-	doexe extras/run_directory/udev_run_devd	|| die "Required helper not installed properly"
-	doexe extras/run_directory/udev_run_hotplugd	|| die "Required helper not installed properly"
-	doexe extras/ata_id/ata_id		|| die "Required helper not installed properly"
-	doexe extras/volume_id/vol_id	|| die "Required helper not installed properly"
-	doexe extras/scsi_id/scsi_id	|| die "Required helper not installed properly"
-	doexe extras/usb_id/usb_id		|| die "Required helper not installed properly"
-	doexe extras/path_id/path_id	|| die "Required helper not installed properly"
-	doexe extras/cdrom_id/cdrom_id	|| die "Required helper not installed properly"
-	doexe extras/dasd_id/dasd_id	|| die "Required helper not installed properly"
-	doexe extras/edd_id/edd_id		|| die "Required helper not installed properly"
-	doexe extras/rule_generator/write_cd_rules	|| die "Required helper not installed properly"
-	doexe extras/rule_generator/write_net_rules	|| die "Required helper not installed properly"
-	doexe extras/rule_generator/rule_generator.functions	|| die "Required helper not installed properly"
-	keepdir /lib/udev/state
-	keepdir /lib/udev/devices
-
-	# vol_id library (needed by mount and HAL)
-	dolib extras/volume_id/lib/*.a extras/volume_id/lib/*.so*
-	# move the .a files to /usr/lib
-	dodir /usr/$(get_libdir)
-	mv -f "${D}"/$(get_libdir)/*.a  "${D}"/usr/$(get_libdir)/
-
-	# handle static linking bug #4411
-	gen_usr_ldscript libvolume_id.so
-
-	# save pkgconfig info
-	insinto /usr/$(get_libdir)/pkgconfig
-	doins extras/volume_id/lib/*.pc
-
-	#exeinto /etc/udev/scripts
-	exeinto /lib/udev
-	#doexe extras/ide-devfs.sh
-	#doexe extras/scsi-devfs.sh
-	#doexe extras/raid-devfs.sh
-	doexe extras/floppy/create_floppy_devices	|| die "Required binary not installed properly"
-	doexe extras/firmware/firmware.sh			|| die "Required binary not installed properly"
-	doexe ${FILESDIR}/net.sh					|| die "Required binary not installed properly"
-	doexe ${FILESDIR}/seq_node.sh				|| die "Required binary not installed properly"
-
-	# Our udev config file
-	insinto /etc/udev
-	newins ${FILESDIR}/udev.conf.post_081 udev.conf
-
-	# Our rules files
-	insinto /etc/udev/rules.d/
-	newins etc/udev/gentoo/udev.rules 50-udev.rules
-	newins ${FILESDIR}/udev.rules-104-r4 50-udev.rules
-	newins ${FILESDIR}/05-udev-early.rules-104-r2 05-udev-early.rules
-	doins ${FILESDIR}/95-net.rules
-	# Use upstream's persistent rules for devices
-	doins etc/udev/rules.d/60-*.rules
-	doins extras/rule_generator/75-*.rules || die "rules not installed properly"
-
-	# scsi_id configuration
-	insinto /etc
-	doins extras/scsi_id/scsi_id.config
-
-	# set up the /etc/dev.d directory tree
-	dodir /etc/dev.d/default
-	dodir /etc/dev.d/net
-	exeinto /etc/dev.d/net
-	doexe extras/run_directory/dev.d/net/hotplug.dev
-
-	# all of the man pages
-	doman *.7
-	doman *.8
-	doman extras/ata_id/ata_id.8
-	doman extras/edd_id/edd_id.8
-	doman extras/scsi_id/scsi_id.8
-	doman extras/volume_id/vol_id.8
-	doman extras/dasd_id/dasd_id.8
-	doman extras/cdrom_id/cdrom_id.8
-	# create a extra symlink for udevcontrol
-	dosym udevd.8 /usr/share/man/man8/udevcontrol.8
-
-	# our udev hooks into the rc system
-	insinto /lib/rcscripts/addons
-	newins "${FILESDIR}"/udev-start-104-r3.sh udev-start.sh
-	newins "${FILESDIR}"/udev-stop-104-r3.sh udev-stop.sh
-
-	# Insert udev-version number into udev-rcscript addon
-	sed -e "s/@@UDEV_VERSION@@/${PV}/" \
-		-i "${D}"/lib/rcscripts/addons/udev-start.sh \
-		-i "${D}"/lib/rcscripts/addons/udev-stop.sh
-
-	# needed to compile latest Hal
-	insinto /usr/include
-	doins extras/volume_id/lib/libvolume_id.h
-
-	dodoc ChangeLog FAQ README TODO RELEASE-NOTES
-	dodoc docs/{overview,udev_vs_devfs}
-	dodoc docs/writing_udev_rules/*
-
-	newdoc extras/volume_id/README README_volume_id
-
-}
-
-pkg_preinst() {
-	if [[ -d ${ROOT}/lib/udev-state ]] ; then
-		mv -f "${ROOT}"/lib/udev-state/* "${D}"/lib/udev/state/
-		rm -r "${ROOT}"/lib/udev-state
-	fi
-
-	if [ -f "${ROOT}/etc/udev/udev.config" -a \
-	     ! -f "${ROOT}/etc/udev/udev.rules" ]
-	then
-		mv -f ${ROOT}/etc/udev/udev.config ${ROOT}/etc/udev/udev.rules
-	fi
-
-	# delete the old udev.hotplug symlink if it is present
-	if [ -h "${ROOT}/etc/hotplug.d/default/udev.hotplug" ]
-	then
-		rm -f ${ROOT}/etc/hotplug.d/default/udev.hotplug
-	fi
-
-	# delete the old wait_for_sysfs.hotplug symlink if it is present
-	if [ -h "${ROOT}/etc/hotplug.d/default/05-wait_for_sysfs.hotplug" ]
-	then
-		rm -f ${ROOT}/etc/hotplug.d/default/05-wait_for_sysfs.hotplug
-	fi
-
-	# delete the old wait_for_sysfs.hotplug symlink if it is present
-	if [ -h "${ROOT}/etc/hotplug.d/default/10-udev.hotplug" ]
-	then
-		rm -f ${ROOT}/etc/hotplug.d/default/10-udev.hotplug
-	fi
-
-	# is there a stale coldplug initscript? (CONFIG_PROTECT leaves it behind)
-	coldplug_stale=""
-	if [ -f "${ROOT}/etc/init.d/coldplug" ]
-	then
-		coldplug_stale="1"
-	fi
-}
-
-pkg_postinst() {
-	if [[ ${ROOT} == "/" ]] ; then
-		if [[ -n $(pidof udevd) ]] ; then
-			killall -15 udevd &>/dev/null
-			sleep 1
-			killall -9 udevd &>/dev/null
-		fi
-		/sbin/udevd --daemon
-	fi
-
-	# people want reminders, I'll give them reminders.  Odds are they will
-	# just ignore them anyway...
-
-	if [[ ${coldplug_stale} == "1" ]] ; then
-		ewarn "A stale coldplug init script found. You should run:"
-		ewarn
-		ewarn "      rc-update del coldplug"
-		ewarn "      rm -f /etc/init.d/coldplug"
-		ewarn
-		ewarn "udev now provides its own coldplug functionality."
-	fi
-
-	# delete 40-scsi-hotplug.rules - all integrated in 50-udev.rules
-	if has_version "=sys-fs/udev-103-r3"; then
-		if [[ -e "${ROOT}/etc/udev/rules.d/40-scsi-hotplug.rules" ]]
-		then
-			ewarn "Deleting stray 40-scsi-hotplug.rules"
-			ewarn "installed by sys-fs/udev-103-r3"
-			rm -f ${ROOT}/etc/udev/rules.d/40-scsi-hotplug.rules
-		fi
-	fi
-
-	# Removing some device-nodes we thought we need some time ago
-	if [[ -d "${ROOT}"/lib/udev/devices ]]; then
-		rm -f "${ROOT}"/lib/udev/devices/{null,zero,console,urandom}
-	fi
-
-	einfo
-	einfo "For more information on udev on Gentoo, writing udev rules, and"
-	einfo "         fixing known issues visit:"
-	einfo "         http://www.gentoo.org/doc/en/udev-guide.xml"
-}