Bump to 7.1RC3.

(Portage version: 2.1_pre10-r5)

3 files changed, 295 insertions, 1 deletions

diff --git a/x11-base/xorg-server/ChangeLog b/x11-base/xorg-server/ChangeLog
index 41abc6842fed..fdd1f8388c04 100644
--- a/x11-base/xorg-server/ChangeLog
+++ b/x11-base/xorg-server/ChangeLog
@@ -1,6 +1,12 @@
 # ChangeLog for x11-base/xorg-server
 # Copyright 1999-2006 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-server/ChangeLog,v 1.114 2006/05/13 05:44:41 joshuabaergen Exp $
+# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-server/ChangeLog,v 1.115 2006/05/13 09:12:24 spyderous Exp $
+
+*xorg-server-1.0.99.903 (13 May 2006)
+
+  13 May 2006; Donnie Berkholz <spyderous@gentoo.org>;
+  -xorg-server-1.0.99.902-r1.ebuild, +xorg-server-1.0.99.903.ebuild:
+  Bump to 7.1RC3.
 
   13 May 2006; Joshua Baergen <joshuabaergen@gentoo.org>
   xorg-server-1.0.2-r4.ebuild, xorg-server-1.0.99.902-r1.ebuild:
diff --git a/x11-base/xorg-server/files/digest-xorg-server-1.0.99.903 b/x11-base/xorg-server/files/digest-xorg-server-1.0.99.903
new file mode 100644
index 000000000000..335bd203637d
--- /dev/null
+++ b/x11-base/xorg-server/files/digest-xorg-server-1.0.99.903
@@ -0,0 +1,6 @@
+MD5 61beda590bfc5b4a12e979d5f2d70d7a MesaLib-6.5.tar.bz2 3062363
+RMD160 6006bfdfed8a2425059c31ee699b5aca4d5f57cd MesaLib-6.5.tar.bz2 3062363
+SHA256 dcacf4c18af89b57e66dc7ba39e24c3b74ff6f83b8745bcc1390170a4190eebd MesaLib-6.5.tar.bz2 3062363
+MD5 18a1b0077839bfd5052a666c0de63f6d xorg-server-1.0.99.903.tar.bz2 6321704
+RMD160 09b2b10b979349283e989a7326f0c16e6302e122 xorg-server-1.0.99.903.tar.bz2 6321704
+SHA256 d64f44e9aa0807c5e30c5c0df65dfdb73139bb82e82958bdaf37aeeb11ed7087 xorg-server-1.0.99.903.tar.bz2 6321704
diff --git a/x11-base/xorg-server/xorg-server-1.0.99.903.ebuild b/x11-base/xorg-server/xorg-server-1.0.99.903.ebuild
new file mode 100644
index 000000000000..0b2de808506d
--- /dev/null
+++ b/x11-base/xorg-server/xorg-server-1.0.99.903.ebuild
@@ -0,0 +1,282 @@
+# Copyright 1999-2006 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-server/xorg-server-1.0.99.903.ebuild,v 1.1 2006/05/13 09:12:24 spyderous Exp $
+
+# Must be before x-modular eclass is inherited
+# Hack to make sure autoreconf gets run
+SNAPSHOT="yes"
+
+inherit x-modular multilib
+
+OPENGL_DIR="xorg-x11"
+
+MESA_PN="Mesa"
+MESA_PV="6.5"
+MESA_P="${MESA_PN}-${MESA_PV}"
+MESA_SRC_P="${MESA_PN}Lib-${MESA_PV}"
+
+PATCHES="${FILESDIR}/${PN}-1.0.2-xprint-init.patch
+	${FILESDIR}/1.0.99.901-Xprint-xprintdir.patch"
+
+SRC_URI="${SRC_URI}
+	mirror://sourceforge/mesa3d/${MESA_SRC_P}.tar.bz2
+	http://xorg.freedesktop.org/snapshots/individual/xserver/${P}.tar.bz2"
+DESCRIPTION="X.Org X servers"
+KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~mips ~ppc ~ppc64 ~sh ~sparc ~x86 ~x86-fbsd"
+IUSE_VIDEO_CARDS="
+	video_cards_chips
+	video_cards_epson
+	video_cards_glint
+	video_cards_i810
+	video_cards_mach64
+	video_cards_mga
+	video_cards_neomagic
+	video_cards_nv
+	video_cards_r128
+	video_cards_radeon
+	video_cards_siliconmotion
+	video_cards_via"
+IUSE="${IUSE_VIDEO_CARDS}
+	dmx dri ipv6 kdrive minimal nptl sdl xorg xprint"
+RDEPEND="x11-libs/libXfont
+	x11-libs/xtrans
+	x11-libs/libXau
+	x11-libs/libXext
+	x11-libs/libX11
+	x11-libs/libxkbfile
+	x11-libs/libXdmcp
+	x11-libs/libXmu
+	x11-libs/libXrender
+	x11-libs/libXi
+	media-libs/freetype
+	>=media-libs/mesa-6.5-r2
+	media-fonts/font-adobe-75dpi
+	media-fonts/font-misc-misc
+	media-fonts/font-cursor-misc
+	x11-misc/xbitmaps
+	|| ( x11-misc/xkeyboard-config x11-misc/xkbdata )
+	x11-apps/iceauth
+	x11-apps/rgb
+	x11-apps/xauth
+	x11-apps/xinit
+	app-admin/eselect-opengl
+	x11-libs/libXaw
+	x11-libs/libXpm
+	x11-libs/libXxf86misc
+	x11-libs/libXxf86vm
+	!minimal? ( x11-libs/libdmx
+		x11-libs/libXtst
+		x11-libs/libXres )
+	>=x11-libs/libxkbui-1.0.2
+	x11-libs/liblbxutil
+	kdrive? ( sdl? ( media-libs/libsdl ) )"
+	# Xres is dmx-dependent, xkbui is xorgcfg-dependent
+	# Xaw is dmx- and xorgcfg-dependent
+	# Xpm is dmx- and xorgcfg-dependent, pulls in Xt
+	# Xxf86misc and Xxf86vm are xorgcfg-dependent
+	# liblbxutil is lbx- dependent
+DEPEND="${RDEPEND}
+	x11-proto/randrproto
+	x11-proto/renderproto
+	>=x11-proto/fixesproto-4
+	x11-proto/damageproto
+	x11-proto/xextproto
+	x11-proto/xproto
+	x11-proto/xf86dgaproto
+	x11-proto/xf86miscproto
+	x11-proto/xf86rushproto
+	x11-proto/xf86vidmodeproto
+	x11-proto/xf86bigfontproto
+	>=x11-proto/compositeproto-0.3
+	x11-proto/recordproto
+	x11-proto/resourceproto
+	x11-proto/videoproto
+	>=x11-proto/scrnsaverproto-1.1.0
+	x11-proto/evieext
+	x11-proto/trapproto
+	>=x11-proto/xineramaproto-1.1-r1
+	x11-proto/fontsproto
+	>=x11-proto/kbproto-1.0-r1
+	x11-proto/inputproto
+	x11-proto/bigreqsproto
+	x11-proto/xcmiscproto
+	>=x11-proto/glproto-1.4.6
+	!minimal? ( x11-proto/dmxproto )
+	dri? ( x11-proto/xf86driproto
+		>=x11-libs/libdrm-2 )
+	xprint? ( x11-proto/printproto
+		x11-apps/mkfontdir
+		x11-apps/mkfontscale )"
+LICENSE="${LICENSE} MIT"
+
+pkg_setup() {
+	# localstatedir is used for the log location; we need to override the default
+	# from ebuild.sh
+	# sysconfdir is used for the xorg.conf location; same applies
+
+	# --enable-xorg needed because darwin defaults off
+	# --enable-install-setuid needed because sparcs default off
+
+	# SDL only available in kdrive build
+	if use kdrive && use sdl; then
+		conf_opts="${conf_opts} --enable-xsdl"
+	else
+		conf_opts="${conf_opts} --disable-xsdl"
+	fi
+
+	# Only Xorg and Xgl support this, and we won't build Xgl
+	# until it merges to trunk
+	if use xorg; then
+		conf_opts="${conf_opts} --with-mesa-source=${WORKDIR}/${MESA_P}"
+	fi
+
+	CONFIGURE_OPTIONS="
+		$(use_enable ipv6)
+		$(use_enable dmx)
+		$(use_enable kdrive)
+		$(use_enable !minimal xvfb)
+		$(use_enable !minimal xnest)
+		$(use_enable dri)
+		$(use_enable xorg)
+		$(use_enable xprint)
+		$(use_enable nptl glx-tls)
+		--sysconfdir=/etc/X11
+		--localstatedir=/var
+		--enable-install-setuid
+		--with-default-font-path=/usr/share/fonts/misc,/usr/share/fonts/75dpi,/usr/share/fonts/100dpi,/usr/share/fonts/TTF,/usr/share/fonts/Type1
+		${conf_opts}"
+
+	local diemsg="You must build xorg-server and mesa with the same nptl USE setting."
+	if built_with_use media-libs/mesa nptl; then
+		use nptl || die "${diemsg}"
+	else
+		use nptl && die "${diemsg}"
+	fi
+
+	# (#121394) Causes window corruption
+	filter-flags -fweb
+
+	# Nothing else provides new enough glxtokens.h
+	ewarn "Forcing on xorg-x11 for new enough glxtokens.h..."
+	OLD_IMPLEM="$(eselect opengl show)"
+	eselect opengl set --impl-headers ${OPENGL_DIR}
+}
+
+src_unpack() {
+	x-modular_specs_check
+	x-modular_dri_check
+	x-modular_unpack_source
+	x-modular_patch_source
+
+	# Set up kdrive servers to build
+	if use kdrive; then
+		einfo "Removing unused kdrive drivers ..."
+		for card in ${IUSE_VIDEO_CARDS}; do
+			real_card=${card#video_cards_}
+
+			# Differences between VIDEO_CARDS name and kdrive server name
+			real_card=${real_card/glint/pm2}
+			real_card=${real_card/radeon/ati}
+			real_card=${real_card/nv/nvidia}
+			real_card=${real_card/siliconmotion/smi}
+			if ! use ${card}; then
+				ebegin "  ${real_card}"
+				sed -i \
+					-e "s:${real_card}::g" \
+					${S}/hw/kdrive/Makefile.am \
+					|| die "sed of ${real_card} failed"
+				eend
+			fi
+
+		done
+
+		# smi and via are the only things on line 2. If line 2 ends up blank,
+		# we need to get rid of the backslash at the end of line 1.
+		if ! use video_cards_siliconmotion && ! use video_cards_via; then
+			sed -i \
+				-e "s:^\(VESA_SUBDIRS.*\)\\\:\1:g" \
+				${S}/hw/kdrive/Makefile.am
+		fi
+
+		# Only need to reconf if we're modifying kdrive's Makefile.am
+		x-modular_reconf_source
+	fi
+}
+
+src_install() {
+	x-modular_src_install
+
+	dynamic_libgl_install
+
+	server_based_install
+}
+
+pkg_postinst() {
+	switch_opengl_implem
+}
+
+pkg_postrm() {
+	# Get rid of module dir to ensure opengl-update works properly
+	if ! has_version x11-base/xorg-server; then
+		if [ -e ${ROOT}/usr/$(get_libdir)/xorg/modules ]; then
+			rm -rf ${ROOT}/usr/$(get_libdir)/xorg/modules
+		fi
+	fi
+}
+
+dynamic_libgl_install() {
+	# next section is to setup the dynamic libGL stuff
+	ebegin "Moving GL files for dynamic switching"
+		dodir /usr/$(get_libdir)/opengl/${OPENGL_DIR}/extensions
+		local x=""
+		for x in ${D}/usr/$(get_libdir)/xorg/modules/extensions/libglx*; do
+			if [ -f ${x} -o -L ${x} ]; then
+				mv -f ${x} ${D}/usr/$(get_libdir)/opengl/${OPENGL_DIR}/extensions
+			fi
+		done
+	eend 0
+}
+
+server_based_install() {
+	use xprint && xprint_src_install
+
+	if ! use xorg; then
+		rm ${D}/usr/share/man/man1/Xserver.1x \
+			${D}/usr/$(get_libdir)/xserver/SecurityPolicy \
+			${D}/usr/$(get_libdir)/pkgconfig/xorg-server.pc \
+			${D}/usr/share/man/man1/Xserver.1x
+	fi
+}
+
+switch_opengl_implem() {
+		# Switch to the xorg implementation.
+		# Use new opengl-update that will not reset user selected
+		# OpenGL interface ...
+		echo
+#		eselect opengl set --use-old ${OPENGL_DIR}
+		eselect opengl set ${OLD_IMPLEM}
+}
+
+xprint_src_install() {
+	# RH-style init script, we provide a wrapper
+	exeinto /usr/$(get_libdir)/misc
+	doexe ${S}/Xprint/etc/init.d/xprint
+	# Patch init script for fonts location
+	sed -e 's:/lib/X11/fonts/:/share/fonts/:g' \
+		-i ${D}/usr/$(get_libdir)/misc/xprint
+	# Install the wrapper
+	newinitd ${FILESDIR}/xprint.init xprint
+	# Install profile scripts
+	insinto /etc/profile.d
+	doins ${S}/Xprint/etc/profile.d/xprint*
+	insinto /etc/X11/xinit/xinitrc.d
+	newins ${S}/Xprint/etc/Xsession.d/cde_xsessiond_xprint.sh \
+		92xprint-xpserverlist.sh
+	# Patch profile scripts
+	sed -e "s:/bin/sh.*get_xpserverlist:/usr/$(get_libdir)/misc/xprint \
+		get_xpserverlist:g" -i ${D}/etc/profile.d/xprint* \
+		${D}/etc/X11/xinit/xinitrc.d/92xprint-xpserverlist.sh
+	# Move profile scripts, we can't touch /etc/profile.d/ in Gentoo
+	dodoc ${D}/etc/profile.d/xprint*
+	rm -f ${D}/etc/profile.d/xprint*
+}