1 files changed, 0 insertions, 325 deletions
diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.3.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.3.ebuild
deleted file mode 100644
index 2fa2b86d4d59..000000000000
--- a/net-wireless/wpa_supplicant/wpa_supplicant-2.3.ebuild
+++ /dev/null
@@ -1,325 +0,0 @@
-# Copyright 1999-2014 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-wireless/wpa_supplicant/wpa_supplicant-2.3.ebuild,v 1.3 2014/11/02 09:40:03 swift Exp $
-
-EAPI=4
-
-inherit eutils toolchain-funcs qt4-r2 systemd multilib
-
-DESCRIPTION="IEEE 802.1X/WPA supplicant for secure wireless transfers"
-HOMEPAGE="http://hostap.epitest.fi/wpa_supplicant/"
-SRC_URI="http://hostap.epitest.fi/releases/${P}.tar.gz"
-LICENSE="|| ( GPL-2 BSD )"
-
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~ia64 ~mips ~ppc ~ppc64 ~sparc ~x86 ~x86-fbsd"
-IUSE="ap dbus gnutls eap-sim fasteap p2p ps3 qt4 readline selinux smartcard ssl wimax wps kernel_linux kernel_FreeBSD"
-REQUIRED_USE="fasteap? ( !gnutls !ssl ) smartcard? ( ssl )"
-
-CDEPEND="dbus? ( sys-apps/dbus )
-	kernel_linux? (
-		eap-sim? ( sys-apps/pcsc-lite )
-		dev-libs/libnl:3
-		net-wireless/crda
-	)
-	!kernel_linux? ( net-libs/libpcap )
-	qt4? (
-		dev-qt/qtcore:4
-		dev-qt/qtgui:4
-		dev-qt/qtsvg:4
-	)
-	readline? (
-		sys-libs/ncurses
-		sys-libs/readline
-	)
-	ssl? ( dev-libs/openssl )
-	!ssl? ( gnutls? ( net-libs/gnutls ) )
-	!ssl? ( !gnutls? ( dev-libs/libtommath ) )
-"
-DEPEND="${CDEPEND}
-	virtual/pkgconfig
-"
-RDEPEND="${CDEPEND}
-	selinux? ( sec-policy/selinux-networkmanager )
-"
-
-S="${WORKDIR}/${P}/${PN}"
-
-pkg_setup() {
-	if use gnutls && use ssl ; then
-		elog "You have both 'gnutls' and 'ssl' USE flags enabled: defaulting to USE=\"ssl\""
-	fi
-}
-
-src_prepare() {
-	# net/bpf.h needed for net-libs/libpcap on Gentoo/FreeBSD
-	sed -i \
-		-e "s:\(#include <pcap\.h>\):#include <net/bpf.h>\n\1:" \
-		../src/l2_packet/l2_packet_freebsd.c || die
-
-	# People seem to take the example configuration file too literally (bug #102361)
-	sed -i \
-		-e "s:^\(opensc_engine_path\):#\1:" \
-		-e "s:^\(pkcs11_engine_path\):#\1:" \
-		-e "s:^\(pkcs11_module_path\):#\1:" \
-		wpa_supplicant.conf || die
-
-	# Change configuration to match Gentoo locations (bug #143750)
-	sed -i \
-		-e "s:/usr/lib/opensc:/usr/$(get_libdir):" \
-		-e "s:/usr/lib/pkcs11:/usr/$(get_libdir):" \
-		wpa_supplicant.conf || die
-
-	if use dbus; then
-		epatch "${FILESDIR}/${P}-dbus-path-fix.patch"
-	fi
-
-	# systemd entries to D-Bus service files (bug #372877)
-	echo 'SystemdService=wpa_supplicant.service' \
-		| tee -a dbus/*.service >/dev/null || die
-
-	cd "${WORKDIR}/${P}"
-
-	if use wimax; then
-		# generate-libeap-peer.patch comes before
-		# fix-undefined-reference-to-random_get_bytes.patch
-		epatch "${FILESDIR}/${P}-generate-libeap-peer.patch"
-		epatch "${FILESDIR}/${P}-fix-undefined-reference-to-random_get_bytes.patch"
-
-		# multilib-strict fix (bug #373685)
-		sed -e "s/\/usr\/lib/\/usr\/$(get_libdir)/" -i src/eap_peer/Makefile
-	fi
-
-	# bug (320097)
-	epatch "${FILESDIR}/${P}-do-not-call-dbus-functions-with-NULL-path.patch"
-
-	# TODO - NEED TESTING TO SEE IF STILL NEEDED, NOT COMPATIBLE WITH 1.0 OUT OF THE BOX,
-	# SO WOULD BE NICE TO JUST DROP IT, IF IT IS NOT NEEDED.
-	# bug (374089)
-	#epatch "${FILESDIR}/${P}-dbus-WPAIE-fix.patch"
-}
-
-src_configure() {
-	# Toolchain setup
-	tc-export CC
-
-	# Basic setup
-	echo "CONFIG_CTRL_IFACE=y" >> .config
-	echo "CONFIG_BACKEND=file" >> .config
-	echo "CONFIG_IBSS_RSN=y"   >> .config
-
-	# Basic authentication methods
-	# NOTE: we don't set GPSK or SAKE as they conflict
-	# with the below options
-	echo "CONFIG_EAP_GTC=y"         >> .config
-	echo "CONFIG_EAP_MD5=y"         >> .config
-	echo "CONFIG_EAP_OTP=y"         >> .config
-	echo "CONFIG_EAP_PAX=y"         >> .config
-	echo "CONFIG_EAP_PSK=y"         >> .config
-	echo "CONFIG_EAP_TLV=y"         >> .config
-	echo "CONFIG_EAP_EXE=y"         >> .config
-	echo "CONFIG_IEEE8021X_EAPOL=y" >> .config
-	echo "CONFIG_PKCS12=y"          >> .config
-	echo "CONFIG_PEERKEY=y"         >> .config
-	echo "CONFIG_EAP_LEAP=y"        >> .config
-	echo "CONFIG_EAP_MSCHAPV2=y"    >> .config
-	echo "CONFIG_EAP_PEAP=y"        >> .config
-	echo "CONFIG_EAP_TLS=y"         >> .config
-	echo "CONFIG_EAP_TTLS=y"        >> .config
-
-	# Enabling background scanning.
-	echo "CONFIG_BGSCAN_SIMPLE=y"	>> .config
-	echo "CONFIG_BGSCAN_LEARN=y"	>> .config
-
-	if use dbus ; then
-		echo "CONFIG_CTRL_IFACE_DBUS=y" >> .config
-		echo "CONFIG_CTRL_IFACE_DBUS_NEW=y" >> .config
-		echo "CONFIG_CTRL_IFACE_DBUS_INTRO=y" >> .config
-	fi
-
-	# Enable support for writing debug info to a log file.
-	echo "CONFIG_DEBUG_FILE=y" >> .config
-
-	if use eap-sim ; then
-		# Smart card authentication
-		echo "CONFIG_EAP_SIM=y"       >> .config
-		echo "CONFIG_EAP_AKA=y"       >> .config
-		echo "CONFIG_EAP_AKA_PRIME=y" >> .config
-		echo "CONFIG_PCSC=y"          >> .config
-	fi
-
-	if use fasteap ; then
-		echo "CONFIG_EAP_FAST=y" >> .config
-	fi
-
-	if use readline ; then
-		# readline/history support for wpa_cli
-		echo "CONFIG_READLINE=y" >> .config
-	fi
-
-	# SSL authentication methods
-	if use ssl ; then
-		echo "CONFIG_TLS=openssl"    >> .config
-	elif use gnutls ; then
-		echo "CONFIG_TLS=gnutls"     >> .config
-		echo "CONFIG_GNUTLS_EXTRA=y" >> .config
-	else
-		echo "CONFIG_TLS=internal"   >> .config
-	fi
-
-	if use smartcard ; then
-		echo "CONFIG_SMARTCARD=y"    >> .config
-	fi
-
-	if use kernel_linux ; then
-		# Linux specific drivers
-		echo "CONFIG_DRIVER_ATMEL=y"       >> .config
-		echo "CONFIG_DRIVER_HOSTAP=y"      >> .config
-		echo "CONFIG_DRIVER_IPW=y"         >> .config
-		echo "CONFIG_DRIVER_NL80211=y"     >> .config
-		echo "CONFIG_DRIVER_RALINK=y"      >> .config
-		echo "CONFIG_DRIVER_WEXT=y"        >> .config
-		echo "CONFIG_DRIVER_WIRED=y"       >> .config
-
-		if use ps3 ; then
-			echo "CONFIG_DRIVER_PS3=y" >> .config
-		fi
-
-	elif use kernel_FreeBSD ; then
-		# FreeBSD specific driver
-		echo "CONFIG_DRIVER_BSD=y" >> .config
-	fi
-
-	# Wi-Fi Protected Setup (WPS)
-	if use wps ; then
-		echo "CONFIG_WPS=y" >> .config
-		echo "CONFIG_WPS2=y" >> .config
-		# USB Flash Drive
-		echo "CONFIG_WPS_UFD=y" >> .config
-		# External Registrar
-		echo "CONFIG_WPS_ER=y" >> .config
-		# Universal Plug'n'Play
-		echo "CONFIG_WPS_UPNP=y" >> .config
-		# Near Field Communication
-		echo "CONFIG_WPS_NFC=y" >> .config
-	fi
-
-	# Wi-Fi Direct (WiDi)
-	if use p2p ; then
-		echo "CONFIG_P2P=y" >> .config
-	fi
-
-	# Access Point Mode
-	if use ap ; then
-		echo "CONFIG_AP=y" >> .config
-	fi
-
-	# Enable mitigation against certain attacks against TKIP
-	echo "CONFIG_DELAYED_MIC_ERROR_REPORT=y" >> .config
-
-	# If we are using libnl 2.0 and above, enable support for it
-	# Bug 382159
-	# Removed for now, since the 3.2 version is broken, and we don't
-	# support it.
-	if has_version ">=dev-libs/libnl-3.2"; then
-		echo "CONFIG_LIBNL32=y" >> .config
-	fi
-
-	if use qt4 ; then
-		pushd "${S}"/wpa_gui-qt4 > /dev/null
-		eqmake4 wpa_gui.pro
-		popd > /dev/null
-	fi
-}
-
-src_compile() {
-	einfo "Building wpa_supplicant"
-	emake V=1 BINDIR=/usr/sbin
-
-	if use wimax; then
-		emake -C ../src/eap_peer clean
-		emake -C ../src/eap_peer
-	fi
-
-	if use qt4 ; then
-		pushd "${S}"/wpa_gui-qt4 > /dev/null
-		einfo "Building wpa_gui"
-		emake
-		popd > /dev/null
-	fi
-}
-
-src_install() {
-	dosbin wpa_supplicant
-	dobin wpa_cli wpa_passphrase
-
-	# baselayout-1 compat
-	if has_version "<sys-apps/baselayout-2.0.0"; then
-		dodir /sbin
-		dosym /usr/sbin/wpa_supplicant /sbin/wpa_supplicant
-		dodir /bin
-		dosym /usr/bin/wpa_cli /bin/wpa_cli
-	fi
-
-	if has_version ">=sys-apps/openrc-0.5.0"; then
-		newinitd "${FILESDIR}/${PN}-init.d" wpa_supplicant
-		newconfd "${FILESDIR}/${PN}-conf.d" wpa_supplicant
-	fi
-
-	exeinto /etc/wpa_supplicant/
-	newexe "${FILESDIR}/wpa_cli.sh" wpa_cli.sh
-
-	dodoc ChangeLog {eap_testing,todo}.txt README{,-WPS} \
-		wpa_supplicant.conf
-
-	doman doc/docbook/*.{5,8}
-
-	if use qt4 ; then
-		into /usr
-		dobin wpa_gui-qt4/wpa_gui
-		doicon wpa_gui-qt4/icons/wpa_gui.svg
-		make_desktop_entry wpa_gui "WPA Supplicant Administration GUI" "wpa_gui" "Qt;Network;"
-	fi
-
-	use wimax && emake DESTDIR="${D}" -C ../src/eap_peer install
-
-	if use dbus ; then
-		pushd "${S}"/dbus > /dev/null
-		insinto /etc/dbus-1/system.d
-		newins dbus-wpa_supplicant.conf wpa_supplicant.conf
-		insinto /usr/share/dbus-1/system-services
-		doins fi.epitest.hostap.WPASupplicant.service fi.w1.wpa_supplicant1.service
-		popd > /dev/null
-	fi
-
-	# systemd stuff
-	systemd_dounit systemd/*.service
-}
-
-pkg_postinst() {
-	elog "If this is a clean installation of wpa_supplicant, you"
-	elog "have to create a configuration file named"
-	elog "/etc/wpa_supplicant/wpa_supplicant.conf"
-	elog
-	elog "An example configuration file is available for reference in"
-	elog "/usr/share/doc/${PF}/"
-
-	if [[ -e ${ROOT}etc/wpa_supplicant.conf ]] ; then
-		echo
-		ewarn "WARNING: your old configuration file ${ROOT}etc/wpa_supplicant.conf"
-		ewarn "needs to be moved to ${ROOT}etc/wpa_supplicant/wpa_supplicant.conf"
-	fi
-
-	# Mea culpa, feel free to remove that after some time --mgorny.
-	local fn
-	for fn in wpa_supplicant{,@wlan0}.service; do
-		if [[ -e "${ROOT}"/etc/systemd/system/network.target.wants/${fn} ]]
-		then
-			ebegin "Moving ${fn} to multi-user.target"
-			mv "${ROOT}"/etc/systemd/system/network.target.wants/${fn} \
-				"${ROOT}"/etc/systemd/system/multi-user.target.wants/
-			eend ${?} \
-				"Please try to re-enable ${fn}"
-		fi
-	done
-}