dev-embedded/openocd: add 0.12.0_rc3

Signed-off-by: Yixun Lan <dlan@gentoo.org>

1 files changed, 105 insertions, 0 deletions

diff --git a/dev-embedded/openocd/openocd-0.12.0_rc3.ebuild b/dev-embedded/openocd/openocd-0.12.0_rc3.ebuild
new file mode 100644
index 000000000000..57562d0c8fc5
--- /dev/null
+++ b/dev-embedded/openocd/openocd-0.12.0_rc3.ebuild
@@ -0,0 +1,105 @@
+# Copyright 1999-2023 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+inherit autotools udev
+
+if [[ ${PV} == *9999 ]] ; then
+	inherit git-r3
+	EGIT_REPO_URI="	https://repo.or.cz/openocd.git"
+else
+	MY_PV="${PV/_/-}"
+	MY_P="${PN}-${MY_PV}"
+	S="${WORKDIR}"/${MY_P}
+	KEYWORDS="~amd64 ~arm ~x86"
+	SRC_URI="mirror://sourceforge/project/${PN}/${PN}/${MY_PV}/${MY_P}.tar.gz"
+fi
+
+DESCRIPTION="OpenOCD - Open On-Chip Debugger"
+HOMEPAGE="https://openocd.sourceforge.net"
+
+LICENSE="GPL-2+"
+SLOT="0"
+IUSE="capstone +cmsis-dap dummy +ftdi +jlink parport +usb verbose-io"
+RESTRICT="strip" # includes non-native binaries
+
+RDEPEND="
+	acct-group/plugdev
+	>=dev-lang/jimtcl-0.81:=
+	capstone? ( dev-libs/capstone )
+	cmsis-dap? ( dev-libs/hidapi )
+	jlink? ( >=dev-embedded/libjaylink-0.2.0 )
+	usb? ( virtual/libusb:1 )
+	ftdi? ( dev-embedded/libftdi:= )"
+
+DEPEND="${RDEPEND}"
+BDEPEND="virtual/pkgconfig"
+
+src_prepare() {
+	default
+
+	AT_NO_RECURSIVE=yes eautoreconf
+}
+
+src_configure() {
+	local myconf=(
+		--enable-amtjtagaccel
+		--enable-am335xgpio
+		--enable-arm-jtag-ew
+		--enable-at91rm9200
+		--enable-bcm2835gpio
+		--enable-buspirate
+		--enable-ep93xx
+		--enable-gw16012
+		--enable-jtag_dpi
+		--enable-sysfsgpio
+		--enable-vdebug
+		--disable-internal-jimtcl
+		--disable-internal-libjaylink
+		--disable-parport-giveio
+		--disable-werror
+		$(use_with capstone)
+		$(use_enable cmsis-dap)
+		$(use_enable dummy)
+		$(use_enable ftdi openjtag)
+		$(use_enable ftdi presto)
+		$(use_enable ftdi usb-blaster)
+		$(use_enable jlink)
+		$(use_enable parport)
+		$(use_enable parport parport_ppdev)
+		$(use_enable usb aice)
+		$(use_enable usb armjtagew)
+		$(use_enable usb ftdi)
+		$(use_enable usb osbdm)
+		$(use_enable usb opendous)
+		$(use_enable usb rlink)
+		$(use_enable usb stlink)
+		$(use_enable usb ti-icdi)
+		$(use_enable usb usbprog)
+		$(use_enable usb usb-blaster-2)
+		$(use_enable usb ulink)
+		$(use_enable usb vsllink)
+		$(use_enable verbose-io verbose-jtag-io)
+		$(use_enable verbose-io verbose-usb-io)
+		$(use_enable verbose-io verbose_usb_comms)
+	)
+
+	econf "${myconf[@]}"
+}
+
+src_install() {
+	default
+	dostrip /usr/bin
+	udev_dorules "${ED}"/usr/share/${PN}/contrib/*.rules
+}
+
+pkg_postinst() {
+	udev_reload
+
+	elog "To access openocd devices as user you must be in the plugdev group"
+}
+
+pkg_postrm() {
+	udev_reload
+}