path: root/sys-libs/ncurses/ncurses-6.5-r1.ebuild

# Copyright 1999-2024 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2

EAPI=8

# sys-libs/ncurses-compat can be bumped with sys-libs/ncurses as upstream
# provide a configure option for the ABI version.

VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/thomasdickey.asc
inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs usr-ldscript verify-sig

MY_PV="${PV:0:3}"
MY_P="${PN}-${MY_PV}"
DESCRIPTION="Console display library"
HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/"
# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net
SRC_URI="
	mirror://gnu/ncurses/${MY_P}.tar.gz
	https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
	https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
	verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
"

GENTOO_PATCH_DEV=sam
GENTOO_PATCH_PV=6.4_p20240413
GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches

# Populated below in a loop. Do not add patches manually here.
UPSTREAM_PATCHES=()

if [[ ${PV} == *_p* ]] ; then
	# Sometimes, after releases, there's no megapatch available yet.
	#
	# From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/:
	#
	#	"At times (generally to mark a relatively stable point), I create a rollup
	#	patch, which consists of all changes from the release through the current date."
	#
	# Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
	# the patches are considered to be acceptable to use after some testing. They
	# are both for development but also bug fixes.
	#
	# This array should contain a list of all the snapshots since the last
	# release if there's no megapatch available yet.
	PATCH_DATES=(
		#20240101

		# Latest patch is just _pN = $(ver_cut 4)
		$(ver_cut 4)
	)

	if [[ -z ${PATCH_DATES[@]} ]] ; then
		SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz"
		SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz.asc"

		# If we have a rollup patch, use that instead of the individual ones.
		UPSTREAM_PATCHES+=( patch.sh )
	else
		# We use a mirror as well because we've had reports of 403 forbidden for some users.
		upstream_url_base="https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-"
		upstream_m_url_base="https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-"

		# Prefix each date with the upstream location (https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P})
		mangled_patches=( "${PATCH_DATES[@]/#/${upstream_url_base}}" )
		# Suffix each with .patch.gz
		mangled_patches=( "${mangled_patches[@]/%/.patch.gz}" )
		mangled_patches_sig=( "${mangled_patches[@]/%/.asc}" )
		# Repeat for .patch.gz.asc for verify-sig
		SRC_URI+=" ${mangled_patches[@]}"
		SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]} )"

		# For all of the URLs, chuck in invisible-island.net too:
		SRC_URI+=" ${mangled_patches[@]/${upstream_url_base}/${upstream_m_url_base}}"
		SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]/${upstream_url_base}/${upstream_m_url_base}} )"

		UPSTREAM_PATCHES=( "${PATCH_DATES[@]/%/.patch}" )

		unset upstream_url_base upstream_m_url_base mangled_patches mangled_patches_sig
	fi
fi

SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz"
S="${WORKDIR}/${MY_P}"

LICENSE="MIT"
# The subslot reflects the SONAME.
SLOT="0/6"
KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris"
IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace"
RESTRICT="!test? ( test )"

# TODO: ncurses allows (and we take advantage of this, even) passing
# the SONAME for dlopen() use, so only the header is needed at build time.
# Maybe we should bundle a copy of gpm.h so we can move gpm to PDEPEND
# which would be far nicer UX-wise.
DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
# Block the older ncurses that installed all files w/SLOT=5, bug #557472
RDEPEND="
	${DEPEND}
	!<=sys-libs/ncurses-5.9-r4:5
	!<sys-libs/slang-2.3.2_pre23
	!<x11-terms/rxvt-unicode-9.06-r3
	!<x11-terms/st-0.6-r1
"
BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"

PATCHES=(
	"${UPSTREAM_PATCHES[@]/#/${WORKDIR}/${MY_P}-}"

	# When rebasing Gentoo's patchset, please use git from a clean
	# src_prepare with upstream patches already applied. git am --reject
	# the existing patchset and rebase as required. This makes it easier
	# to manage future rebasing & adding new patches.
	#
	# For the same reasons, please include the original configure.in changes,
	# NOT just the generated results!
	"${WORKDIR}"/${GENTOO_PATCH_NAME}
)

src_unpack() {
	# Avoid trying to verify our own patchset tarball, there's no point
	if use verify-sig ; then
		local file
		for file in ${A} ; do
			if [[ ${file} == ${MY_P}.tar.gz ]] ; then
				verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig
			else
				[[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue

				verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc
			fi
		done
	fi

	default
}

src_configure() {
	# bug #115036
	unset TERMINFO

	tc-export_build_env BUILD_{CC,CXX,CPP}

	# bug #214642
	BUILD_CPPFLAGS+=" -D_GNU_SOURCE"

	# Build the various variants of ncurses -- narrow, wide, and threaded. #510440
	# Order matters here -- we want unicode/thread versions to come last so that the
	# binaries in /usr/bin support both wide and narrow.
	# The naming is also important as we use these directly with filenames and when
	# checking configure flags.
	NCURSES_TARGETS=(
		ncurses
		ncursesw
		ncursest
		ncursestw
	)

	# When installing ncurses, we have to use a compatible version of tic.
	# This comes up when cross-compiling, doing multilib builds, upgrading,
	# or installing for the first time.  Build a local copy of tic whenever
	# the host version isn't available. bug #249363, bug #557598
	if ! has_version -b "~sys-libs/${P}:0" ; then
		local lbuildflags="-static"

		# some toolchains don't quite support static linking
		local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
		case ${CHOST} in
			*-darwin*)  dbuildflags=     ;;
			*-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
		esac
		echo "int main() {}" | \
			$(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \
			|| lbuildflags="${dbuildflags}"

		# We can't re-use the multilib BUILD_DIR because we run outside of it.
		BUILD_DIR="${WORKDIR}" \
		CC=${BUILD_CC} \
		CXX=${BUILD_CXX} \
		CPP=${BUILD_CPP} \
		CHOST=${CBUILD} \
		CFLAGS=${BUILD_CFLAGS} \
		CXXFLAGS=${BUILD_CXXFLAGS} \
		CPPFLAGS=${BUILD_CPPFLAGS} \
		LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
		do_configure cross --without-shared --with-normal --with-progs --without-ada
	fi
	multilib-minimal_src_configure
}

multilib_src_configure() {
	if [[ ${ABI} == x86 ]] ; then
		# For compatibility with older binaries at slight performance cost.
		# bug #616402
		use stack-realign && append-flags -mstackrealign
	fi

	local t
	for t in "${NCURSES_TARGETS[@]}" ; do
		do_configure "${t}"
	done
}

do_configure() {
	local target=$1
	shift

	mkdir "${BUILD_DIR}/${target}" || die
	cd "${BUILD_DIR}/${target}" || die

	local conf=(
		# We need the basic terminfo files in /etc, bug #37026.  We will
		# add '--with-terminfo-dirs' and then populate /etc/terminfo in
		# src_install() ...
		--with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"

		# Enable installation of .pc files.
		--enable-pc-files
		# This path is used to control where the .pc files are installed.
		--with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"

		# Now the rest of the various standard flags.
		--with-shared
		--enable-fvisibility
		# (Originally disabled until bug #245417 is sorted out, but now
		# just keeping it off for good, given nobody needed it until now
		# (2022) and we're trying to phase out bdb.)
		--without-hashed-db
		$(use_with ada)
		$(use_with cxx)
		$(use_with cxx cxx-binding)
		--with-cxx-shared
		$(use_with debug)
		$(use_with profile)
		# The configure script uses ldd to parse the linked output which
		# is flaky for cross-compiling/multilib/ldd versions/etc...
		$(use_with gpm gpm libgpm.so.1)

		# bug #930806
		--disable-setuid-environ
		# TODO: Maybe do these for USE=hardened
		#--disable-root-access
		#--disable-root-environ

		--disable-term-driver
		--disable-termcap
		--enable-symlinks
		--with-manpage-format=normal
		--enable-const
		--enable-colorfgbg
		--enable-hard-tabs
		--enable-echo
		$(use_enable !ada warnings)
		$(use_with debug assertions)
		$(use_enable !debug leaks)
		$(use_with debug expanded)
		$(use_with !debug macros)
		$(multilib_native_with progs)
		$(use_with test tests)
		$(use_with trace)
		$(use_with tinfo termlib)
		--disable-stripping
		--disable-pkg-ldflags
	)

	if [[ ${target} == ncurses*w ]] ; then
		conf+=( --enable-widec )
	else
		conf+=( --disable-widec )
	fi
	if [[ ${target} == ncursest* ]] ; then
		conf+=( --with-{pthread,reentrant} )
	else
		conf+=( --without-{pthread,reentrant} )
	fi

	# Make sure each variant goes in a unique location.
	if [[ ${target} == "ncurses" ]] ; then
		# "ncurses" variant goes into "${EPREFIX}"/usr/include
		# It is needed on Prefix because the configure script appends
		# "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
		conf+=( --enable-overwrite )
	else
		conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
	fi
	# See comments in src_configure.
	if [[ ${target} != "cross" ]] ; then
		local cross_path="${WORKDIR}/cross"
		[[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic"
	fi

	ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
}

src_compile() {
	# See comments in src_configure.
	if ! has_version -b "~sys-libs/${P}:0" ; then
		BUILD_DIR="${WORKDIR}" do_compile cross -C progs tic$(get_exeext)
	fi

	multilib-minimal_src_compile
}

multilib_src_compile() {
	local t
	for t in "${NCURSES_TARGETS[@]}" ; do
		do_compile "${t}"
	done
}

do_compile() {
	local target=$1
	shift

	cd "${BUILD_DIR}/${target}" || die

	# A little hack to fix parallel builds ... they break when
	# generating sources so if we generate the sources first (in
	# non-parallel), we can then build the rest of the package
	# in parallel.  This is not really a perf hit since the source
	# generation is quite small.
	emake -j1 sources

	# For some reason, sources depends on pc-files which depends on
	# compiled libraries which depends on sources which ...
	# Manually delete the pc-files file so the install step will
	# create the .pc files we want.
	rm -f misc/pc-files || die
	emake "$@"
}

multilib_src_install() {
	local target
	for target in "${NCURSES_TARGETS[@]}" ; do
		emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
	done

	# Move main libraries into /.
	if multilib_is_native_abi ; then
		gen_usr_ldscript -a \
			"${NCURSES_TARGETS[@]}" \
			$(usex tinfo 'tinfow tinfo' '')
	fi

	# Don't delete '*.dll.a', needed for linking, bug #631468
	if ! use static-libs; then
		find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
	fi

	# Build fails to create this ...
	# -FIXME-
	# Ugly hackaround for riscv having two parts libdir (bug #689240)
	# Replace this hack with an official solution once we have one...
	# -FIXME-
	dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
		/usr/$(get_libdir)/terminfo

	# Remove obsolete libcurses symlink that is created by the build
	# system. Technically, this could be also achieved
	# via --disable-overwrite but it also moves headers implicitly,
	# and we do not want to do this yet.
	# bug #836696
	rm "${ED}"/usr/$(get_libdir)/libcurses* || die
}

multilib_src_install_all() {
	local terms=(
		# Dumb/simple values that show up when using the in-kernel VT.
		ansi console dumb linux
		vt{52,100,102,200,220}
		# [u]rxvt users used to be pretty common.  Probably should drop this
		# since upstream is dead and people are moving away from it.
		rxvt{,-unicode}{,-256color}
		# xterm users are common, as is terminals re-using/spoofing it.
		xterm xterm-{,256}color
		# screen is common (and reused by tmux).
		screen{,-256color}
		screen.xterm-256color
	)
	if use split-usr ; then
		local x
		# We need the basic terminfo files in /etc for embedded/recovery, bug #37026
		einfo "Installing basic terminfo files in /etc..."
		for x in "${terms[@]}"; do
			local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null)
			local basedir=$(basename "$(dirname "${termfile}")")

			if [[ -n ${termfile} ]] ; then
				dodir "/etc/terminfo/${basedir}"
				mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die
				dosym "../../../../etc/terminfo/${basedir}/${x}" \
					"/usr/share/terminfo/${basedir}/${x}"
			fi
		done

		echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses

		use minimal && rm -r "${ED}"/usr/share/terminfo*
		# Because ncurses5-config --terminfo returns the directory we keep it
		# bug #245374
		keepdir /usr/share/terminfo
	elif use minimal ; then
		# Keep only the basic terminfo files
		find "${ED}"/usr/share/terminfo/ \
			\( -type f -o -type l \) ${terms[*]/#/! -name } -delete , \
			-type d -empty -delete || die
	fi

	cd "${S}" || die
	dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
	if use doc ; then
		docinto html
		dodoc -r doc/html/
	fi
}

pkg_preinst() {
	preserve_old_lib /$(get_libdir)/libncurses.so.5
	preserve_old_lib /$(get_libdir)/libncursesw.so.5
}

pkg_postinst() {
	preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
	preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
}